CJU4828

JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD TO-252-2L Plastic-Encapsulate MOSFETS CJU4828 N-Channel Power MOSFET RDS(on)TYP V(BR)DSS ID 37mΩ@10V 60V TO-252-2L 4.5A 60mΩ@4.5V DESCRIPTION The CJU4828 uses advanced trench technology and design to provide excellent RDS(ON) with low gate charge. It can be used in a 1. GATE 2. DRAIN 3. SOURCE 2 1 3 wide variety of applications. FEATURES  High density cell design for ultra low RDS(on)  Special process technology for high ESD capability  Fully characterized avalanche voltage and current  Excellent package for good heat dissipation  Good stability and uniformity with high EAS  Power switching application APPLICATIONS  Hard switched and high frequency circuits  Uninterruptible power supply MARKING EQUIVALENT CIRCUIT U4828= Device code Solid dot = Green molding compound device, if none, the normal device XXXX=Code MAXIMUM RATINGS ( Ta=25℃ unless otherwise noted ) Parameter Symbol Limit Unit Drain-Source Voltage VDS 60 V Gate-Source Voltage VGS ±20 V Continuous Drain Current ID 4.5 A Pulsed Drain Current IDM 20 A 18 mJ PD 1.25 W RθJA 100 ℃/W Junction Temperature TJ 150 ℃ Storage Temperature Range Tstg -55 ~+150 ℃ Lead Temperature for Soldering Purposes(1/8’’ from case for 10s) TL 260 ℃ Single Pulsed Avalanche Energy EAS Power Dissipation Thermal Resistance from Junction to Ambient (1) (1).EAS condition: VDD=50V,L=0.5mH, RG=25Ω, Starting TJ = 25°C www.jscj-elec.com 1 Rev. - 1.1 Electrical characteristics (Ta=25℃ unless otherwise noted) Parameter Test Condition Symbol Min Typ Max Unit STATIC PARAMETERS Drain-source breakdown voltage V(BR)DSS VGS = 0V, ID =250µA Zero gate voltage drain current IDSS VDS =60V,VGS = 0V Gate-body leakage current IGSS VGS =±20V, VDS = 0V Gate threshold voltage (note 3) VGS(th) VDS =VGS, ID =250µA Drain-source on-resistance (note 3) RDS(on) 60 V 1 1 µA ±100 nA 3 V VGS =10V, ID =4.5A 37 56 mΩ VGS =4.5V, ID =3A 60 77 mΩ Forward tranconductance (note 3) gFS VDS =5V, ID =4.5A Diode forward voltage (note 3) VSD IS=1A, VGS = 0V 4 S 1 V 540 pF DYNAMIC PARAMETERS (note 4) Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance VDS =30V,VGS =0V,f =1MHz 60 pF Crss 25 pF td(on) 4.7 ns SWITCHING PARAMETERS (note 4) Turn-on delay time Turn-on rise time Turn-off delay time tr VGS=10V,VDS=30V, 2.3 ns td(off) RL=6.7Ω,RGEN=3Ω 15.7 ns 1.9 ns Turn-off fall time tf Total Gate Charge (10V) Qg Total Gate Charge (4.5V) VDS =30V,VGS =10V,ID =4.5A 10.5 nC 5.5 nC Gate-Source Charge Qgs 1.6 nC Gate-Drain Charge Qgd 2.2 nC Notes : 1. The value in any given application depends on the user’s specific board design. 2. Repetitive rating : Pulse width limited by junction temperature. 3. Pulse Test : Pulse Width≤300µs, Duty Cycle≤0.5%. 4. These parameters have no way to verify. www.jscj-elec.com 2 Rev. - 1.1 Typical Characteristics Output Characteristics Transfer Characteristics 20 20 Pulsed VGS= 5.0V VGS= 10V VDS= 5V Pulsed (A) DRAIN CURRENT ID VGS= 4.0V DRAIN CURRENT 15 VGS= 4.5V ID (A) 15 10 5 10 TJ=100℃ TJ=25℃ 5 VGS= 3.5V 0 0 0 1 2 3 4 DRAIN TO SOURCE VOLTAGE VDS 5 0 1 (V) 2 RDS(ON) —— RDS(ON) —— VGS 4 VGS 5 (V) ID 200 TJ=25℃ Pulsed (mΩ) TJ=25℃ Pulsed 150 RDS(ON) 150 ON-RESISTANCE RDS(ON) (mΩ) 200 ON-RESISTANCE 3 GATE TO SOURCE VOLTAGE 100 ID= 4.5A 50 0 VGS= 4.5V 100 50 VGS= 10V 0 2 4 6 8 GATE TO SOURCE VOLTAGE VGS 10 0 5 10 DRAIN CURRENT (V) ID 15 20 1.0 1.2 (A) IS —— VSD Threshold Voltage 2.0 20 TJ=25℃ IS (A) 1.8 SOURCE CURRENT THRESHOLD VOLTAGE Pulsed 1.9 VTH (V) 10 ID= 250uA 1.7 1 0.1 1.6 1.5 25 50 75 AMBIENT TEMPERATURE www.jscj-elec.com 100 Ta 0.01 0.4 125 (℃ ) 0.6 0.8 SOURCE TO DRAIN VOLTAGE 3 VSD (V) Rev. - 1.1 TO-252-2L Package Outline Dimensions D A D1 c V L3 h E φ L4 L A1 L2 L1 D2 b e θ Symbol A A1 b c D D1 D2 E e L L1 L2 L3 L4 Φ θ h V Dimensions In Millimeters Min. Max. 2.200 2.400 0.000 0.127 0.635 0.770 0.460 0.580 6.500 6.700 5.100 5.460 4.830 REF. 6.000 6.200 2.186 2.386 9.712 10.312 2.900 REF. 1.400 1.700 1.600 REF. 0.600 1.000 1.100 1.300 0° 8° 0.000 0.300 5.250 REF. Dimensions In Inches Min. Max. 0.087 0.094 0.000 0.005 0.025 0.030 0.018 0.023 0.256 0.264 0.201 0.215 0.190 REF. 0.236 0.244 0.086 0.094 0.382 0.406 0.114 REF. 0.055 0.067 0.063 REF. 0.024 0.039 0.043 0.051 0° 8° 0.000 0.012 0.207 REF. TO-252-2L Suggested Pad Layout NOTICE JSCJ reserves the right to make modifications,enhancements,improvements,corrections or other changes without further notice to any product herein. JSCJ does not assume any liability arising out of the application or use of any product described herein. www.jscj-elec.com 4 Rev. - 1.1 TO-252-2L Tape and Reel www.jscj-elec.com 5 Rev. - 1.1