2N3906

2N3906 TRANSISTOR(PNP) PRODUCT SUMMARY TO-92 Plastic-Encapsulate Transistors TO-92 FEATURES PNP silicon epitaxial planar transistor for switching and Amplifier applications As complementary type, the NPN transistor 2N3904 is Recommended This transistor is also available in the SOT-23 case with the type designation MMBT3906 1.EMITTER 2.BASE 3. COLLECTOR 123 MAXIMUM RATINGS (TA=25 oC unless otherwise noted) Symbol VCBO VCEO VEBO IC PC TJ Tstg Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current -Continuous Collector Power Dissipation Junction Temperature Storage Temperature Value -40 -40 -5 -0.2 0.625 150 -55-150 Units V V V A W ℃ ℃ 03/17/2008 Rev.1.00 www.SiliconStandard.com 1 2N3906 ELECTRICAL CHARACTERISTICS (Tamb=25 C unless otherwise specified) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off Collector cut-off Emitter cut-off current current current Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICBO ICEX IEBO hFE1 DC current gain hFE2 hFE3 Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Delay Time Rise Time Storage Time Fall Time VCE(sat) VBE(sat) fT td tr ts tf Test conditions MIN -40 -40 -5 -0.1 -50 -0.1 100 60 30 -0.4 -0.95 250 35 35 225 75 V V MHz ns ns ns ns 400 TYP MAX UNIT V V V μA nA μA o IC = -10μA, IE=0 IC =-1mA , IB=0 IE= -10μA, IC=0 VCB= -40 V,IE=0 VCE= -30 V,VBE(off)=-3V VEB= -5 V , VCE=-1 V, VCE=-1 V, VCE=-1 V, IC=0 IC= -10mA IC= -50mA IC= -100mA IC= -50mA, IB= -5mA IC= -50mA, IB= -5mA VCE=-20V, IC= -10mA f = 100MHz VCC=-3V,VBE=-0.5V, IC=-10mA,IB1=-1mA VCC=-3V,Ic=-10mA IB1=IB2=-1mA CLASSIFICATION OF hFE1 Rank Range O 100-200 Y 200-300 G 300-400 03/17/2008 Rev.1.00 www.SiliconStandard.com 2 2N3906 TYPICAL CHARACTERISTICS 03/17/2008 Rev.1.00 www.SiliconStandard.com 3 2N3906 Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 03/17/2008 Rev.1.00 www.SiliconStandard.com 4