ST83003

ST83003 High voltage fast-switching NPN power transistor Features ■ High voltage capability ■ Very high switching speed Application ■ Electronic ballast for fluorescent lighting 3 Description 1 SOT-32 The device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The ST83003 is expressly designed for a new solution to be used in compact fluorescent lamps, where it is coupled with the ST93003, its complementary PNP transistor. Table 1. 2 Figure 1. Internal schematic diagram Device summary Order code Marking Package Packaging ST83003 83003 SOT-32 Bag December 2010 Doc ID 9085 Rev 4 1/11 www.st.com 11 Contents ST83003 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 Doc ID 9085 Rev 4 ST83003 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0, IB = 0.75 A, tp < 10 µs) V(BR)EBO V 1.5 A 3 A Base current 0.75 A IBM Base peak current (tp < 5 ms) 1.5 A PTOT Total dissipation at Tc = 25 °C 40 W TSTG Storage temperature -65 to 150 °C 150 °C IC ICM IB TJ Table 3. Symbol RthJC Collector current Collector peak current (tp < 5 ms) Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case _ max Doc ID 9085 Rev 4 Value Unit 3.1 °C/W 3/11 Electrical characteristics 2 ST83003 Electrical characteristics Tcase = 25 °C unless otherwise specified Table 4. On/off states Value Symbol Parameter Test conditions Unit Min. ICES V(BR)EBO Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V, TC = 125 °C Emitter-base breakdown voltage (IC = 0) IE = 10 mA 12 IC = 10 mA 400 Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) VCE(sat) (1) Collector-emitter saturation voltage IC = 0.5 A, IB = 0.1 A IC = 0.35 A, IB = 50 mA VBE(sat) (1) Base-emitter saturation voltage IC = 0.5 A, IB = 0.1 A DC current gain IC = 10 mA, VCE = 5 V IC = 0.35 A, VCE = 5 V IC = 1 A, VCE = 5 V tr ts tf Resistive load Rise time Storage time Fall time IC = 0.35 A, VCC = 125 V, IB1 = 70 mA, IB2 = -70 mA tP ≥ 25 µs see Figure 14 ts tf Inductive load Storage time Fall time IC = 0.5 A, IB1 = 0.1 A, VBE(off) = -5 V, L = 10 mH, Vclamp = 300 V see Figure 13 hFE (1) 1. 4/11 Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Doc ID 9085 Rev 4 Typ. Max. 1 5 mA mA 18 V V 0.5 1 V V 1 V 10 16 4 25 32 1.5 100 2.2 0.2 2.9 450 90 ns µs µs ns ns ST83003 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating Figure 4. DC current gain (VCE = 5 V) Figure 5. DC current gain (VCE = 1 V) Figure 6. Collector emitter saturation voltage Figure 7. Doc ID 9085 Rev 4 Base emitter saturation voltage 5/11 Electrical characteristics Figure 8. Resistive load fall time Figure 10. Inductive load fall time ST83003 Figure 9. Figure 11. Inductive load storage time Figure 12. Reverse biased SOA 6/11 Resistive load storage time Doc ID 9085 Rev 4 ST83003 3 Test circuits Test circuits Figure 13. Inductive load switching 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier Figure 14. Resistive load switching 1. Fast electronic switch 2. Non-inductive resistor Doc ID 9085 Rev 4 7/11 Package mechanical data 4 ST83003 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 8/11 Doc ID 9085 Rev 4 ST83003 Package mechanical data Doc ID 9085 Rev 4 9/11 Revision history 5 ST83003 Revision history Table 5. 10/11 Document revision history Date Revision Changes 16-Oct-2002 1 Initial release 08-Jul-2008 2 Mechanical data has been updated 08-Sep-2009 3 Updated packaging information Table 1 on page 1. 03-Dec-2010 4 Added Table 3: Thermal data on page 3. Doc ID 9085 Rev 4 ST83003 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 9085 Rev 4 11/11