STB8NM60N

STx8NM60N N-channel 600 V, 0.56 Ω,7 A MDmesh™ II Power MOSFET TO-220, TO-220FP, IPAK, DPAK, D2PAK Features VDSS (@Tjmax) Type RDS(on) max ID 3 2 3 STB8NM60N 650 V < 0.65 Ω 7A STD8NM60N 650 V < 0.65 Ω 7A STD8NM60N-1 650 V < 0.65 Ω 7A STF8NM60N 650 V < 0.65 Ω STP8NM60N 650 V < 0.65 Ω 7A IPAK TO-220 ■ Low input capacitance and gate charge ■ Low gate input resistance 3 1 t e l o s b O Figure 1. ) (s Application Switching applications 2 TO-220FP Internal schematic diagram t c u d o r ' P e t e l o Table 1. 3 1 $ This series of devices implements second generation MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the Company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. s b O r P e D²PAK DPAK 100% avalanche tested u d o 3 1 (1) 7A ■ Description 2 1 1. Limited only by maximum temperature allowed ■ ) s ( ct 1 3 !-V Device summary Order codes Marking Package Packaging STB8NM60N B8NM60N D²PAK Tape and reel STD8NM60N D8NM60N DPAK Tape and reel STD8NM60N-1 D8NM60N IPAK Tube STF8NM60N F8NM60N TO-220FP Tube STP8NM60N P8NM60N TO-220 Tube November 2008 Rev 3 1/19 www.st.com 19 Contents STx8NM60N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit ................................................ 9 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 2/19 s b O STx8NM60N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit TO-220, IPAK, DPAK, D²PAK TO-220FP VDS Drain-source voltage (VGS = 0) 600 V VGS Gate-source voltage ± 25 V ID Drain current (continuous) at TC = 25 °C 7 ID Drain current (continuous) at TC = 100 °C 4.3 IDM (2) Drain current (pulsed) 28 PTOT Total dissipation at TC = 25 °C VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s;TC = 25 °C) Tj Tstg ) (s Operating junction temperature Storage temperature Pr ete 4.3 (1) A 28 (1) A 25 W 2500 V -- b O dv/dt (3) Peak diode recovery voltage slope A u d o 70 l o s ) s ( ct 7 (1) 15 V/ns -55 to 150 °C t c u 1. Limited only by maximum temperature allowed d o r 2. Pulse width limited by safe operating area 3. ISD ≤ 7 A, di/dt ≤ 400 A/µs, VDD = 80% V(BR)DSS P e Table 3. t e l o Symbol s b O Thermal data Value Parameter Unit TO-220 IPAK DPAK D²PAK TO-220FP Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-amb Tl Table 4. Symbol 1.78 62.5 100 Maximum lead temperature for soldering purpose 5 -- 62.5 300 °C/W °C/W °C Avalanche characteristics Parameter Max value Unit IAS Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 2.5 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAS, VDD = 50 V) 200 mJ 3/19 Electrical characteristics 2 STx8NM60N Electrical characteristics (TCASE=25 °C unless otherwise specified) Table 5. On/off states Symbol V(BR)DSS dv/dt(1) Parameter Drain-source breakdown voltage Drain-source voltage slope VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 3.5 A µA µA ±100 nA 2 3 4 V 0.56 0.65 Ω s b O Parameter t c u 1 100 u d o r P e t e l o Characteristics value at turn off on inductive load Test conditions Min. Typ. Max. Unit VDS = 15 V, ID= 3.5 A 15 S gfs(1) Forward transconductance Ciss Input capacitance Output capacitance Reverse transfer capacitance VDS = 50 V, f = 1 MHz, VGS = 0 560 37 2 pF pF pF Equivalent output capacitance VGS = 0, VDS = 0 to 480 V 153 pF RG Gate input resistance f = 1 MHz Gate DC Bias = 0 Test Signal Level = 20 mV Open Drain 6 Ω Qg Total gate charge Gate-source charge Gate-drain charge 19 3 10 nC nC nC od r P e Coss t e l o Crss Coss eq.(2) Qgs Qgd 1. VDS = Max rating,Tc = 125 °C V/ns ) s ( ct VDS = Max rating, VGS = ±20 V ) (s V 38 VGS =10 V Gate body leakage current (VDS = 0) Symbol O VDD = 480 V, ID = 7 A, IGSS Dynamic Typ. Max. Unit 600 Zero gate voltage drain current (VGS = 0) Table 6. Min. ID = 1 mA, VGS = 0 IDSS 1. bs Test conditions VDD = 480 V, ID = 7 A VGS = 10 V (see Figure 19) Pulsed: pulse duration = 300µs, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/19 STx8NM60N Electrical characteristics Table 7. Switching times Symbol Parameter td(on) tr td(off) tf Table 8. Test conditions VDD = 300 V, ID = 3.5 A, Turn-on delay time Rise time Turn-off delay time Fall time (see Figure 18), (see Figure 23) ISD Source-drain current Source-drain current (pulsed) VSD(2) trr Qrr IRRM trr Qrr IRRM Max. Unit ns ns ns ns Source drain diode Parameter ISDM Typ. 10 12 40 10 RG = 4.7 Ω, VGS = 10 V Symbol (1) Min. Test conditions Forward on voltage ISD = 7 A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 7 A, di/dt = 100 A/µs, VDD = 30 V, Tj = 25 °C (see Figure 20) Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 7A, di/dt = 100 A/µs, VDD = 30 V, Tj=150°C (see Figure 20) O ) Typ. Max. Unit 7 28 A A 1.3 V ) s ( ct u d o r P e t e l o bs Min. 310 2.40 15 ns µC A 480 3.50 15 ns µC A s ( t c 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300µs, duty cycle 1.5% u d o r P e t e l o s b O 5/19 Electrical characteristics STx8NM60N 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220, D²PAK Figure 3. Thermal impedance for TO-220, D²PAK ) s ( ct Figure 4. Safe operating area for DPAK, IPAK Figure 5. u d o r P e Thermal impedance for DPAK, IPAK t e l o ) (s s b O t c u d o r P e t e l o bs Figure 6. O 6/19 Safe operating area for TO-220FP Figure 7. Thermal impedance for TO-220FP STx8NM60N Figure 8. Electrical characteristics Output characteristics Figure 9. Transfer characteristics ) s ( ct u d o r P e Figure 10. Transconductance Figure 11. Static-drain source on resistance t e l o ) (s s b O t c u d o r P e t e l o Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations s b O 7/19 Electrical characteristics STx8NM60N Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature ) s ( ct Figure 16. Source-drain diode forward characteristics u d o r P e Figure 17. Normalized BVDSS vs temperature t e l o ) (s t c u d o r P e t e l o s b O 8/19 s b O STx8NM60N 3 Test circuit Test circuit Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit ) s ( ct u d o r P e Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test switching and diode recovery times circuit t e l o ) (s s b O t c u d o r P e t e l o Figure 22. Unclamped inductive waveform s b O Figure 23. Switching time waveform 9/19 Package mechanical data 4 STx8NM60N Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 10/19 s b O STx8NM60N Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ 1.27 16.40 28.90 ) (s ) s ( ct 0.050 10 2.40 4.95 1.23 6.20 2.40 13 3.50 3.75 2.65 Max 0.181 0.034 0.066 0.027 0.62 b O so let r P e 3.85 2.95 u d o 0.147 0.104 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 t c u d o r P e t e l o s b O 11/19 Package mechanical data STx8NM60N TO-220FP mechanical data mm Dim. Min. Typ. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.5 G 4.95 G1 2.4 H 10 5.2 e t e ol 16 L3 28.6 L4 9.8 L5 2.9 L6 15.9 L7 9 3 A 10.4 30.6 10.6 3.6 16.4 9.3 3.2 L7 E B ol s b O 2.7 O ) u d o Pr Pr bs s ( t c Dia ) s ( ct u d o L2 ete Max. D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_J 12/19 STx8NM60N Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 0.95 ) s ( ct b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 E 6.40 6.20 e 2.28 e1 4.40 e t e ol H 16.10 L 9.00 (L1) 0.80 L2 V1 ) (s du s b O o r P 6.60 4.60 9.40 1.20 0.80 10 o t c u d o r P e t e l o s b O 0068771_H 13/19 Package mechanical data STx8NM60N D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 Typ u d o r P e t e l o s b O 0079457_M 8° 0° e t e ol bs 0.4 0° O ) Pr 0.192 0.590 0.099 0.090 0.05 0.051 ) s ( ct u d o 0.1 5.28 15.85 2.69 2.79 1.40 1.75 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 2.54 4.88 15 2.49 2.29 1.27 1.30 s ( t c 14/19 Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.409 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° STx8NM60N Package mechanical data TO-252 (DPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 ) s ( ct 5.10 E du 6.40 6.60 E1 4.70 e 2.28 e1 4.40 H 9.35 L 1 e t e ol L1 o r P 4.60 10.10 2.80 bs L2 L4 0.60 O ) R 0o V2 0.80 1 0.20 8o s ( t c u d o r P e t e l o s b O 0068772_G 15/19 Packaging mechanical data 5 STx8NM60N Packaging mechanical data DPAK FOOTPRINT ) s ( ct All dimensions are in millimeters u d o r P e TAPE AND REEL SHIPMENT t e l o REEL MECHANICAL DATA DIM. )- s ( t c u d o TAPE MECHANICAL DATA DIM. 16/19 inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 e t e ol s b O Pr mm B1 D 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 s b O mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T MAX. inch MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STx8NM60N Packaging mechanical data D 2 PAK FOOTPRINT ) s ( ct u d o TAPE AND REEL SHIPMENT r P e REEL MECHANICAL DATA DIM. so let ) (s t c u TAPE MECHANICAL DATA DIM. A0 ete B0 s b O ol od mm Pr MIN. 10.5 15.7 inch MAX. MIN. 10.7 0.413 0.421 15.9 0.618 0.626 0.059 0.063 b O mm MIN. A B inch MAX. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T MIN. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. D 1.5 1.6 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 17/19 Revision history 6 STx8NM60N Revision history Table 9. Document revision history Date Revision Changes 29-Aug-2007 1 First release 07-Jan-2008 2 IDSS value has been corrected on Table 5: On/off states 21-Nov-2008 3 Added new package, mechanical data. ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 18/19 s b O STx8NM60N ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19