STN9260
High voltage fast-switching
PNP power transistor
Features
■
High voltage capability
■
Fast switching speed
4
Applications
2
1
■
Lighting
■
Switch mode power supply
3
SOT-223
Description
This device is a high voltage fast-switching PNP
power transistor. It is manufactured using high
voltage multi epitaxial planar technology for high
switching speeds and medium voltage capability.
It uses a cellular emitter structure with planar
edge termination to enhance switching speeds
while maintaining a wide RBSOA. The device is
designed for use in lighting applications and low
cost switch-mode power supplies.
Table 1.
I
Figure 1.
Internal schematic diagram
Device summary
Part number
Marking
Package
Packaging
STN9260
N9260
SOT-223
Tape and reel
August 2011
Doc ID 18326 Rev 2
1/10
www.st.com
10
Electrical ratings
1
Electrical ratings
Table 2.
Absolute maximum ratings
Symbol
Parameter
Unit
Collector-emitter voltage (VBE = 0)
-600
V
VCEO
Collector-emitter voltage (IB = 0)
-600
V
VEBO
Emitter-base voltage (IC = 0)
-7
V
-0.5
A
-1
A
Base current
-0.25
A
IBM
Base peak current (tP < 5 ms)
-0.5
A
PTOT
Total dissipation at Ta = 25 °C
1.6
W
TSTG
Storage temperature
-65 to 150
°C
150
°C
Value
Unit
78
°C/W
ICM
IB
TJ
Table 3.
Symbol
RthJA
1.
Value
VCES
IC
2/10
STN9260
Collector current
Collector peak current (tP < 5 ms)
Max. operating junction temperature
Thermal data
Parameter
Thermal resistance junction-ambient
(1)
Device mounted on PCB area of 1 cm².
Doc ID 18326 Rev 2
_max
STN9260
2
Electrical characteristics
Electrical characteristics
Tcase = 25 °C unless otherwise specified.
Table 4.
Symbol
Electrical characteristics
Parameter
Test conditions
Min.
Typ. Max. Unit
ICES
Collector cut-off current
VCE = -600 V
(VBE = 0)
-10
µA
IEBO
Emitter cut-off current
(IC = 0)
-1
µA
Collector-emitter
VCE(sus) (1) sustaining voltage
(IB = 0)
VEB = -7 V
IC = -10 mA
-600
V
VCE(sat) (1)
Collector-emitter
saturation voltage
IC = -100 mA
IB = -10 mA
-1
V
VBE(sat) (1)
Base-emitter saturation
IC = -100 mA
voltage
IB = -10 mA
-1
V
hFE
tr
ts
tf
DC current gain
Resistive load
Rise time
Storage time
Fall time
IC = -10 mA
IC = -20 mA
VCE = -5 V
VCE = -5 V
VCC=-200 V, IC=-0.1 A
IB1=-10 mA, IB2=20 mA
Tp=30 µs
140
50
200
3.2
150
ns
µs
ns
1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %.
Doc ID 18326 Rev 2
3/10
Electrical characteristics
STN9260
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area
Figure 3.
Derating curve
0ULSEOPERATION
#OLLECTORPOWERDISSIPATION 0C7
)C-AX
)C;!=
)C-AX#ONT
MS
MS
S
&ORSINGLE
NONREPETITIVE
PULSE
S
Figure 4.
6CE;6=
Output curves up to VCE= -1 V
Figure 5.
!-V
4AMB #
Output curves up to VCE= -2 V
)"M!
)"M!
#OLLECTORCURRENT)C;!=
#OLLECTORCURRENT)C;!=
!-V
)"M!
)"M!
#OLLECTOR
EMITTERVOLTAGE6CE;6=
Figure 6.
!-V
DC current gain (VCE = -1 V)
Figure 7.
#OLLECTOR
EMITTERVOLTAGE6CE;6=
!-V
DC current gain (VCE = -5 V)
4J #
4J #
4J #
4/10
4J #
4J
#
HFE
HFE
4J
#
)C;!=
!-V
Doc ID 18326 Rev 2
)C;!=
!-V
STN9260
Figure 8.
Electrical characteristics
Collector-emitter saturation voltage Figure 9.
Base-emitter saturation voltage
4J
#
4J #
4J #
6"%SAT ;6=
6CESAT;6=
4J #
H
&%
4J #
H
&%
4J
#
!-V
Figure 10. Base-emitter on voltage
)C;!=
!-V
Figure 11. Capacitance variation
4J
#
4J #
#IB
4J #
#CAPACITANCE;P&=
6BEON ;6=
)C;!=
6CE6
#OB
!-V
)C;!=
62REVERSEVOLTAGE ;6=
!-V
Figure 12. Reverse biased safe operating area
0.6
0.5
Ic [A]
0.4
hfe = 2
Vbeoff = -5V
Rbb = 0 Ω
L=1mH
Tj ≤ 125 °C
0.3
0.2
0.1
0
0
100
200
300
Vce [V]
400
500
600
700
800
AM10060v1
Doc ID 18326 Rev 2
5/10
Electrical characteristics
2.2
STN9260
Test circuits
Figure 13. Resistive load switching test circuit
1. Fast electronic switching
2. Non-inductive resistor
6/10
Doc ID 18326 Rev 2
STN9260
3
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Doc ID 18326 Rev 2
7/10
mm
Dim.
Min.
Typ.
A
Max.
1.80
A1
0.02
0.1
B
0.60
0.70
0.85
B1
2.90
3.00
3.15
c
0.24
0.26
0.35
D
6.30
6.50
6.70
e
2.30
e1
4.60
E
3.30
3.50
3.70
H
6.70
7.00
7.30
V
10°
0046067_M
8/10
Doc ID 18326 Rev 2
STN9260
4
Revision history
Revision history
Table 6.
Document revision history
Date
Revision
Changes
13-Dec-2010
1
Initial release.
03-Aug-2011
2
– Curves inserted
– Minor text changes
Doc ID 18326 Rev 2
9/10
STN9260
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10
Doc ID 18326 Rev 2
很抱歉,暂时无法提供与“STN9260”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+1.98214
- 30+1.91379
- 100+1.77709
- 500+1.64039
- 1000+1.57204