VP0808

VP0808 P-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS -80V RDS(ON) (max) 5.0Ω ID(ON) (min) -1.1A Order Number / Package TO-92 VP0808L Features ❏ Free from secondary breakdown ❏ Low power drive requirement ❏ Ease of paralleling ❏ Low CISS and fast switching speeds ❏ Excellent thermal stability ❏ Integral Source-Drain diode ❏ High input impedance and high gain ❏ Complementary N- and P-channel devices Advanced DMOS Technology These enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex’s well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown. Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications ❏ Motor controls ❏ Converters ❏ Amplifiers ❏ Switches ❏ Power supply circuits ❏ Drivers (relays, hammers, solenoids, lamps, memories, displays, bipolar transistors, etc.) Package Option Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. 11/12/01 SGD TO-92 BVDSS BVDGS ± 30V -55°C to +150°C 300°C Note: See Package Outline section for dimensions. Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. 1 VP0808 Thermal Characteristics Package TO-92 ID (continuous)* -0.28A ID (pulsed) -3A Power Dissipation 1W θjc θja °C/W 125 * ID (continuous) is limited by max rated Tj. °C/W 170 Electrical Characteristics (@ 25°C unless otherwise specified) Symbol BVDSS VGS(th) IGSS IDSS Parameter Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate Body Leakage Zero Gate Voltage Drain Current Min -80 -1.0 -4.5 -100 -10 -500 ID(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD ON-State Drain Current Static Drain-to-Source ON-State Resistance Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Time Fall Time Diode Forward Voltage Drop -1.2 200 150 60 25 15 40 30 30 V VGS = 0V, ISD = -0.9A ns VDD = -25V, ID = -0.5A RGEN = 25Ω pF VGS = 0V, VDS = -25V f = 1MHz -1.1 5.0 µA A Ω m Typ Max Unit V V nA Conditions VGS= 0V, ID =-10µA VGS = VDS, ID = -1mA VGS = ±20V, VDS = 0V VGS = 0V, VDS = Max Rating VGS = 0V, VDS = Max Rating TA = 125°C VGS = -10V, VDS = -15V VGS = -10V, ID = -1A VDS = -10V, ID = -0.5A Notes: 1. All D.C. parameters 100% tested at 25°C unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V 10% INPUT -10V PULSE GENERATOR 90% t(ON) Rgen t(OFF) tr td(OFF) tF INPUT td(ON) 0V 90% OUTPUT VDD 90% 10% 10% ©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 2 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 • FAX: (408) 222-4895 www.supertex.com Ω D.U.T. OUTPUT RL VDD 11/12/01