VLMO31J1L2-GS18

VLMO31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC • Available in 8 mm tape 948553 • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption DESCRIPTION • Luminous intensity IVmax./IVmin. ≤ 1.6 This device has been designed for applications requiring narrow brightness and color selection. ratio in one packaging unit • Preconditioning according to JEDEC® level 2a The package of this device is the PLCC-2. • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT GROUP AND PACKAGE DATA APPLICATIONS • Product group: LED • Package: SMD PLCC-2 • Telecommunication: telephone and fax • Product series: standard • Indicator and backlight for audio and video equipment • Angle of half intensity: ± 60° • Indicator and backlight in office equipment indicator and backlighting in • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. VLMO31J1K2-GS08 WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. Soft orange 4.5 8 11.2 10 598 605 611 10 - 2.0 2.8 20 GaAsP on GaP VLMO31K1L2-GS08 Soft orange 7.1 8.5 18 10 598 605 611 10 - 2.0 2.8 20 GaAsP on GaP Rev. 1.8, 14-Apr-2022 Document Number: 81333 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C unless otherwise specified) VLMO31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 74 °C IF 20 mA tp ≤ 10 μs IFSM 0.34 A PV 56 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C t≤5s Tsd 260 °C Mounted on PC board (pad size > 16 mm2) RthJA 400 K/W Soldering temperature Thermal resistance junction to ambient Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C unless otherwise specified) VLMO31.., SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VLMO31J1K2 IV 4.5 8 11.2 mcd VLMO31K1L2 IV 7.1 8.5 18 mcd Luminous intensity (1) IF = 10 mA Dominant wavelength IF = 10 mA λd 598 605 611 nm Peak wavelength IF = 10 mA λp - 605 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 2.0 2.8 V IR = 10 μA VR 6 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse voltage Junction capacitance Note (1) In one packing unit I Vmax./IVmin. ≤ 1.6 LUMINOUS INTENSITY CLASSIFICATION STANDARD CROSSING TABLE VISHAY OSRAM OPTIONAL MIN. MAX. VLMO31J1K2 LOT670-J1K2 1 4.5 5.6 VLMO31K1L2 LOT670-K1L2 2 5.6 7.1 1 7.1 9.0 2 9.0 11.2 1 11.2 14.0 GROUP LIGHT INTENSITY (mcd) J K L M 2 14.0 18.0 1 18.0 22.4 2 22.4 28.0 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above Type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable COLOR CLASSIFICATION SOFT ORANGE GROUP DOM. WAVELENGTH (nm) MIN. MAX. 1 598 601 2 600 603 3 602 605 4 604 607 5 606 609 6 608 611 Note • Wavelengths are tested at a current pulse duration of 25 ms TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Rev. 1.8, 14-Apr-2022 Document Number: 81333 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors Axis Title Axis Title 30 1.0 10000 10000 1000 10 100 0.7 1000 0.6 1st line 2nd line 20 2nd line Irel - Relative Intensity 0.8 1st line 2nd line 2nd line IF - Forward Current (mA) 0.9 0.5 0.4 100 0.3 0.2 0.1 0 0 10 0 20 40 60 80 10 520 540 560 580 600 620 640 660 680 700 720 100 Tamb - Ambient Temperature (°C) 2nd line λ - Wavelengths (nm) 2nd line Fig. 1 - Forward Current vs. Ambient Temperature Fig. 4 - Relative Intensity vs. Wavelength Axis Title Axis Title 0.02 1000 0.05 100 100 0.1 10 1 0.01 0.2 0.5 DC 1 10 10 100 1 10 0.1 1000 1st line 2nd line 0.01 2nd line IF - Forward Current (mA) tp/T = 0.005 1000 10000 100 1st line 2nd line 2nd line IF - Forward Current (mA) 10000 10 1 100 2 3 tp - Pulse Length (ms) 2nd line VF - Forward Voltage (V) 2nd line Fig. 2 - Forward Current vs. Pulse Length Fig. 5 - Forward Current vs. Forward Voltage Axis Title 10° 20° 10000 100 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.8, 14-Apr-2022 10 1000 1st line 2nd line 40° 1.0 2nd line IV rel - Relative Luminous Intensity 30° ϕ - Angular Displacement IV rel - Relative Luminous Intensity 0° 1 100 0.1 0.01 10 1 10 100 IF - Forward Current (mA) 2nd line Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81333 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors Axis Title Axis Title 1.0 100 0.5 0 -20 0 20 40 60 80 1000 1.00 100 0.95 0.90 10 -40 1.05 1st line 2nd line 1000 2nd line VF,rel - Relative Forward Voltage (V) 2.0 1.5 10000 1.10 10000 1st line 2nd line 2nd line Irel - Relative Luminous Intensity 2.5 100 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.8, 14-Apr-2022 4 Document Number: 81333 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) SOLDERING PROFILE Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC level 2a 300 Temperature (°C) Adhesive tape Blister tape max. 260 °C 245 °C 255 255°C°C 250 240 °C 217 °C 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Component cavity 250 300 max. 2 cycles allowed Fig. 11 - Vishay Leadfree Reflow Soldering Profile (according to J-STD-020) 94 8670 TAPING OF VLM.3... TTW Soldering (according to CECC00802) 300 Lead temperature 4.0 3.6 8.3 7.7 1.85 1.65 4.1 3.9 200 235 °C to 260 °C First wave 100 °C to 130 °C 100 100 0.25 4.1 3.9 2 K/s 50 2.05 1.95 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 5.75 5.25 2nd line Temperature (°C) 250 3.6 3.4 10000 5s 2.2 2.0 3.5 3.1 1.6 1.4 200 Time (s) 19470-2 ca. 5 K/s Forced cooling 94 8668 0 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 2.5 1.5 948626-1 50 100 150 200 250 Time (s) Fig. 12 - Double Wave Soldering of Opto Devices (all Packages) 10.0 9.0 120° 4.5 3.5 10 0 Fig. 9 - Tape Dimensions in mm for PLCC-2 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 10 - Reel Dimensions - GS08 Rev. 1.8, 14-Apr-2022 Document Number: 81333 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMO31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL RECOMMENDED METHOD OF STORAGE A N B C D Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. E F G H I K L M After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: A. 2D barcode B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code G. Termination finish An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L E V E L CAUTION L. SL: storage location M. Environmental Symbols: RoHS, lead (Pb)-free, halogen free N. Lot numbers This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at