8156

UTC 8156 8 FUNCTIONS XMAS LIGHT CONTROL FEATURES * 8 functions * Rotary switch select * Built in PLL,50/60Hz auto detect. CMOS IC APPLICATION * Xmas light control ,any AC control toys. DIP-16 DIP-18 * Pb-free plating product number: 8156L PIN CONFIGURATION DIP-16 T3 T4 T5 T6 T7 T8 T1 T2 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 CLK S1 S2 T6 S3 S4 VDD ZC VSS T7 T8 T1 T2 VSS 4 5 6 7 8 9 9 T3 T4 T5 1 2 3 1 DIP-18 18 18 17 16 15 14 13 12 11 10 10 NC CLK S1 S2 S3 S4 VDD ZC NC UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R502-010,C UTC 8156 MODE FUNCTIONS MODE 1 2 3 4 5 6 7 8 FUNCTIONS AUTO SCAN MODE 2 TO MODE 7 IN WAVES SEQUENTIAL SLO-GOL CHASING / FLASH SLOW FADE TWINKLE / FLASH STEADY ON CMOS IC ELECTRICAL CHARACTERISTICS (@VDD=4V unless otherwise specified) PARAMETER Operating Voltage Operating Current Oscillator Frequency Operating Temperature SYMBOL VDD Iop Fosc Topr. TEST CONDITIONS No load ±30% TOL. MIN. TYP. 4 250 25 MAX. 5 2 60 UNIT V mA KHz °C 0 APPLICATION DIAGRAM DIP-16 AC110V 60Hz T3 T4 T5 T6 T7 T8 T1 T2 1 16 S1 S2 S3 S4 VDD ZC C1 + R1 8 9 9 10 VSS R2 UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R502-010,C UTC 8156 DIP-18 AC110V 60Hz CMOS IC T3 T4 T5 T6 T7 T8 T1 T2 VSS 1 18 S1 S2 S3 S4 VDD ZC 9 10 C1 + R1 R2 8-STEP SWITCH T1 T2 T8 AC110V 60Hz R1 R2 C1 82K 1M 47µ /16V AC220V 50Hz 180K 1M 47µ/16V AC24V 50Hz 200K 1M 47µ/16V T4 T5 T6 T3 T7 UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R502-010,C UTC 8156 PAD ASSIGNMENT & POSITION 4 3 2 1 17 5 Y 15 (0,0) X 14 13 12 11 10 CHIP SIZE: 1.56 × 1.24 mm SUBSTRATE: VDD 2 CMOS IC 16 6 7 8 9 NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 NAME S4 S3 S2 S1 CLK T3 T4 T5 T6 T7 T8 T1 T2 VSS TEST ZC VDD X -73.2 -268.3 -467.3 -690.7 -690.7 -690.7 -690.7 -690.7 -690.7 691.5 691.5 691.5 691.5 691.5 691.5 691.5 691.5 Y 529.6 529.6 529.6 530.9 335.8 -108.7 -248.7 -388.7 -528.7 -528.7 -388.7 -248.7 -108.7 31.3 171.3 351.6 526.3 UNIT:um UTC UNISONIC TECHNOLOGIES CO., LTD. 4 QW-R502-010,C UTC 8156 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO., LTD. 5 QW-R502-010,C