UH2C

New Product UH2B, UH2C & UH2D Vishay General Semiconductor Surface Mount Ultrafast Rectifier FEATURES • Low profile package • Ideal for automated placement • Oxide planar chip junction • Ultrafast recovery times for high frequency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s DO-214AA (SMB) • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. 2.0 A PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF at IF = 2.0 A TJ max. 100 V, 150 V, 200 V 50 A 25 ns 0.69 V 175 °C MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94 V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC-Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) (1) VRRM IF(AV) IFSM TJ, TSTG SYMBOL UH2B HB 100 UH2C HC 150 2.0 50 - 55 to + 175 UH2D HD 200 V A A °C UNIT Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Note: (1) Free air, mounted on recommended copper pad area Document Number: 89108 Revision: 03-Jun-09 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product UH2B, UH2C & UH2D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER IF = 1.0 A IF = 2.0 A IF = 1.0 A IF = 2.0 A Reverse current (2) Maximum reverse recovery time Typical reverse recovery time Typical softness factor (tb/ta) Typical reverse recovery current Typical stored charge Typical junction capacitance 4.0 V, 1 MHz IF = 2.0 A, dI/dt = 200 A/µs, VR = 200 V TA = 125 °C Rated VR IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, lrr = 0.1 IRM TEST CONDITIONS TA = 25 °C VF TA = 125 °C TA = 25 °C TA = 125 °C IR SYMBOL TYP. 0.79 0.87 0.62 0.69 10 15 TA = 25 °C trr 20 S IRM Qrr CJ 0.3 5.0 55 42 35 6.0 A nC pF MAX. 1.05 V 0.90 2.0 50 25 ns µA UNIT Instantaneous forward voltage (1) Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) SYMBOL RθJA RθJM UH2B UH2C 105 15 UH2D UNIT °C/W Note: (1) Free air, mounted on recommended copper pad area. Thermal resistance RθJA - junction to ambient, RθJM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UH2D-E3/52T UH2D-E3/5BT UH2DHE3/52T (1) UH2DHE3/5BT (1) Note: (1) AEC-Q101 qualified UNIT WEIGHT (g) 0.100 0.100 0.100 0.100 PREFERRED PACKAGE CODE 52T 5BT 52T 5BT BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89108 Revision: 03-Jun-09 New Product UH2B, UH2C & UH2D Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.4 1000 Resistive or Inductive Load 2.0 Average Forward Rectified Current (A) Instantaneous Reverse Current (µA) TA = 175 °C 100 TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 1.6 1.2 0.8 TM Measured at Mount of Terminal 0.4 0.1 TA = 25 °C 0 95 105 115 125 135 145 155 165 175 0.01 10 20 30 40 50 60 70 80 90 100 TM - Mount Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Reverse Characteristics 2.0 1.8 D = 0.3 D = 0.5 D = 0.2 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.4 0.8 1.2 1.6 2.0 2.4 D = tp/T tp T D = 0.1 D = 1.0 D = 0.8 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Average Power Loss (W) 1.6 Junction Capacitance (pF) 10 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Figure 2. Forward Power Loss Characteristics Figure 5. Typical Junction Capacitance 100 1000 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) TA = 175 °C 10 TA = 150 °C Junction to Ambient 100 1 TA = 125 °C TA = 100 °C 10 0.1 TA = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0.001 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance Document Number: 89108 Revision: 03-Jun-09 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product UH2B, UH2C & UH2D Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) MIN. 0.220 REF. www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89108 Revision: 03-Jun-09 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1