1
MOTION DETECTION AND LIGHTING CONTROL SOLUTIONS
PB022308-0412
ZMOTION ADVANTAGE
ZMOTION Detection Module
Complete Motion Detection
Solution
Overview
Best in Class Motion Detection
Performance
Zilog’s ZMOTION Detection Module is a complete motion detection solution ideally suited for applications
that need to detect a human presence. It is an excellent solution for detecting people as they approach
entrances, kiosks, product displays, vending machines, appliances and advertising displays.
Extremely Flexible Interface
Adjustable to Meet your
Application Needs
APPLICATIONS
Unattended Vending and Kiosks
Display Systems
Home Appliances
Lighting Control
Power Management
HVAC
Access Control
General-Purpose Proximity
Sensing Applications
The ZMOTION Detection Module is a board-level product that combines the unique features of Zilog's
Z8FS040 Motion Detection Microcontroller with a Pyroelectric Sensor and a Low-Profile Lens. The module is
only 25.5 mm x 16.7 mm (and less than 10mm thick) so it can easily fit into many size constrained
applications.
The ZMOTION Detection Module is simple to use. It can operate in a Hardware mode which simply activates
an output signal when motion is detected; or in a serial mode allowing it to “talk” to another processor in your
system when greater control over the motion detection performance is required. In both modes, sensitivity
and output activation time can be controlled to match application requirements. For applications that require
ambient light sensing, an input supporting an external light sensor is provided that can be used to gate the
motion detection output.
Zilog’s Detection Module Development Kit makes it quick and easy to integrate the ZMOTION Detection
Module into your own custom application.
The ZMOTION Detection Module is a great way to reduce design effort and eliminate development risk for any
device that needs motion detection capability.
Features
Right-Angle connector version shown
(ZEPIR0AAS02MODG)
Straight connector version also
available (ZEPIR0ABS02MODG)
Complete motion detection solution including low-profile lens
Direct sensor interface and advanced software-based motion detection algorithms provide
superior sensitivity and stability
Small form factor – only 25.5 mm x 16.7 mm x 9.5 mm
8-pin interface connector with two available orientations (right-angle and straight)
Wide 5m x 6m, 60-degree detection pattern
Simple hardware- or advanced serial (UART)-based configuration and interface
Adjustable sensitivity and output activation time and support for Ambient Light Sensor input
Unique Hyper Sense feature automatically increases sensitivity after motion is detected
SLEEP Mode for low-power applications
Minimal components ensure high reliability (no electrolytic capacitors)
Modify the application code to suite your own application requirements
2.7V to 3.6V operation from 0°C to 70°C
Complete development kit available (ZEPIR000102ZCOG)
ZMOTION™ Detection Module
APPLICATIONS
MOTION DETECTION SOLUTIONS
Block Diagram
Unattended Vending and Kiosks
Reduce energy consumption by
auto-dimming lights when people
are not present
Attract customers when they come
near
Automated guidance
Display Systems
Reduce energy consumption by
turning off when people are not
present
Attract people when they come
near
Home Appliances
Save energy by turning off large
appliances when people are not
present
Ventilators
Air purifiers
Televisions
ZMOTION Advantages
The surface-mount pyroelectric sensor and low-profile lens combine to provide small size without
sacrificing performance. The module is only 25.5 mm x 16.7 mm (a little over ½ square inch) so it can
easily fit into many size-constrained applications.
The signal from the pyroelectric sensor is sent directly to the ZMOTION MCU, providing it with a true,
unaltered signal to allow the software to identify and react to false trigger sources such as drift, EMI
and ESD, thereby providing a more stable motion detector. This direct interface also eliminates the
need for external components including large electrolytic capacitors, thereby improving reliability and
ensuring the smallest possible form factor.
The motion detection software in the ZMOTION MCU does not require temperature compensation. As a
result, stability is improved and the requirement for a discrete temperature sensor is eliminated.
Control over sensitivity and output activation time is provided through a simple hardware interface;
more advanced settings and status are available through an asynchronous serial interface mode.
The ZMOTION Detection Module employs a direct interface to the pyroelectric sensor, allowing it to
dynamically monitor the signal and determine when it has stabilized. As a result, required power-on
stabilization time is minimized.
2
ZMOTION™ Detection Module
APPLICATIONS
Lighting Control
Conveniently turn lights on
automatically
Reduce energy consumption by
automatically turning off lights
when people are not in the
room
Lights do not turn on when
ambient light is sufficiently
high
Adjustable delay from 1 second
to 128 minutes
Access Control
Sense when someone
approaches a controlled entry
door
Automatically unlock the door
from one side while
maintaining access control on
the other
Eliminates need for readers on
both sides of the door
MOTION DETECTION SOLUTIONS
Operation
Hardware Interface Mode
Sensitivity, output timing and ambient light threshold are controlled by the voltage present on the
3 configuration pins (SNS, DLY and LG)
Sleep mode is entered by driving /SLP low
Digital output on the /MD pin is activated when motion is detected
Serial Interface Mode
Advanced configuration and status via serial interface
/MD, LG and /SLP remain functional
The serial interface (RXD and TXD) operates at: 9600 bps, no parity, 8 data bits and 1 stop bit
Provides access to additional features:
o
Wider selection of activation times, sensitivity and range
o
Low frequency rejection
o
Directional detection
o
Hyper Sense mode
Detection Pattern
The ZMOTION Detection Module lens provides a typical range of 5m x 6m with a 60-degree angle. The
actual distance is dependent on the sensitivity setting and ambient temperature.
3m
2m
1m
0m
1m
2m
3m
1m
2m
3m
4m
5m
3
ZMOTION™ Detection Module
APPLICATIONS
MOTION DETECTION SOLUTIONS
Electrical Characteristics
Power Management
Item
Min.
Typ.
Max.
Operating Voltage
2.7V
3.3V
3.6V
Control power to any publiclyaccessed device based on
activity in addition to time of
day
HVAC
Room heating sources on and
off automatically based on
occupancy
Turn air conditioners on and off
when people enter and leave a
room
Reduce power consumption of
air purifiers and fans by turning
them on only when people are
in the room
Operating Current
8.9mA
Sleep Mode Current
450µA
/MD Output Drive
25mA
/MD Output Duration
(Active Low)
Programmable
H/W Mode: 2s – 15min
Serial Mode: 1s to 128min
Stabilization Time
Coverage
Dynamic
Angle
60°
Range
5m
Dimensions
25.5mm x 16.7mm x 9.5mm
Temperature Range
–0°C
+70°C
Ordering Information
Order the ZMOTION Detection Module from your local Zilog Distributor using the part numbers below.
For more information, or to download product collateral and software, please visit us at
www.zilog.com.
Part Number
Description
ZEPIR0AAS02MODG
ZMOTION Detection Module (Right-Angle Connector)
ZEPIR0ABS02MODG
ZMOTION Detection Module (Straight Connector)
ZEPIR000102ZCOG
ZMOTION Detection Module Development Kit
Documentation
The collateral referenced below is a sample of the documentation available for the ZMOTION Detection
Module. For a complete listing of all available application notes, product specifications, user manuals,
and sample libraries, please visit us at www.zilog.com.
Document Number
Description
PS0284
ZMOTION Detection Module Product Specification
UM0223
ZMOTION Detection Module Development Kit User Manual
4
TM
ZMOTION™
Detection
ZMOTION
Detection
and Module
Control Family
ADVANCED MOTION DETECTION SOLUTIONS
Engineering Notes
MOTION DETECTION SOLUTIONS
5
TM
ZMOTION™
Detection
ZMOTION
Detection
and Module
Control Family
MOTION DETECTION SOLUTIONS
ADVANCED MOTION DETECTION SOLUTIONS
Warning: DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.
LIFE SUPPORT POLICY
ZILOG’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.
As used herein
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to
perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury
to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system or to affect its safety or effectiveness.
Document Disclaimer
©2012 Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to
suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE
INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY
INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information
contained within this document has been verified according to the general principles of electrical and mechanical engineering.
Z8 Encore! XP and ZMOTION are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the
property of their respective owners.
WWW.ZILOG.COM | 408.457.9000
©Zilog, Inc., 2012. All rights reserved
6
很抱歉,暂时无法提供与“ZEPIR0ABS02MODG”相匹配的价格&库存,您可以联系我们找货
免费人工找货