ASPI-2515-100M-T2

Low Profile Shielded SMD Chip Power Inductor ASPI-2515 series Pb 2.5 x 2.0 x 1.5mm RoHS/RoHS II Compliant MSL Level: 1 Features Applications • Small size and low profile: 1.5mm • Small DCR and high rated current • High reliability to mechanical stress • Magnetically shielded by magnetic powder molding • Suitable for RoHS reflow profile • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras Electrical Specifications Operating Temperature & Humidity: Storage Temperature & Humidity: -40˚C to +125˚C (Including self generated heat) -10˚C to +40˚C, 70% RH Part Number Inductance Inductance Tolerance Units Symbol ASPI-2515-R16 ASPI-2515-R24 ASPI-2515-R33 ASPI-2515-R47 ASPI-2515-R68 ASPI-2515-1R0 ASPI-2515-1R2 ASPI-2515-1R5 ASPI-2515-2R2 ASPI-2515-3R3 ASPI-2515-4R7 ASPI-2515-6R8 ASPI-2515-100 ASPI-2515-150 ASPI-2515-180 ASPI-2515-220 ASPI-2515-330 ASPI-2515-470 ASPI-2515-680 ASPI-2515-101 μH L 0.16 0.24 0.33 0.47 0.68 1.0 1.2 1.5 2.2 3.3 4.7 6.8 10.0 15 18 22 33 47 68 100 % M, N M M M M M M M M M M M M M M M M M M M M DC Resistance Max Typ mΩ mΩ DCR 22 18 22 18 29 24 36 30 42 35 44 37 78 65 78 65 96 80 144 120 210 175 360 300 522 435 1000 830 1000 830 1090 910 1840 1530 2220 1850 3000 2500 5400 4500 Saturation Current Temperature Rise Current Self-Resonant Frequency A Isat 6.50 4.00 4.00 3.70 3.20 1.70 2.20 2.00 1.80 1.15 1.10 0.80 0.70 0.65 0.50 0.45 0.35 0.25 0.30 0.22 A Irms 4.05 4.05 3.35 3.00 2.50 2.20 1.95 1.95 1.80 1.40 1.12 0.95 0.87 0.57 0.57 0.54 0.42 0.30 0.28 0.21 MHz SRF 380 260 230 170 150 85 75 75 55 43 36 25 21 18 14 11 7.5 8.9 8 6 Test Conditions 1. Inductance is measured with a WK3260B LCR meter or equivalent. 2. RDC is measured with a HIOKI 3540 or equivalent.(or equivalent). 3. Isat : Based on inductance change (ΔL/Lo : ≤ -30%) 4. Irms : Based on temperature rise (ΔT : 40°C TYP. ) 5. Test Freq: 1MHz, 1Vrms LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 06-22-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2515 series Pb 2.5 x 2.0 x 1.5mm RoHS/RoHS II Compliant MSL Level: 1 Part Number Identification ASPI-2515Inductance Code Please refer to the Electrical Spec Table Tolerance M: ±20%* Packaging T2: Tape and Reel (2kpcs / reel) Mechanical Information A B C D E F a Typ. b Typ. c Typ. 2.5 ± 0.2 2.0 ± 0.2 1.2 Max 2.00 ± 0.2 0.8 ± 0.2 0.8 ± 0.2 0.8 0.85 2.0 Recommended Land Pattern Circuit Schematic No Polarity Dimensions: mm LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 06-22-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2515 series Pb 2.5 x 2.0 x 1.5mm RoHS/RoHS II Compliant MSL Level: 1 Reflow Profile 3 Tp Tp Critical Zone TL to Tp Ramp Up Temperature TL TSMAX TL TSMIN Ramp Down Preheat 1 2 25 Time Zone Description Temperature Time 1 Preheat / Soak TSMIN ~ TSMAX 150°C ~ 180°C 60 ~ 100 sec. 2 Reflow TL 200°C 20 sec. 3 Peak heat TP 260°C 10 sec. MAX LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 06-22-20 ISO9001-2015 CERTIFIED Low Profile Shielded SMD Chip Power Inductor ASPI-2515 series Pb 2.5 x 2.0 x 1.5mm RoHS/RoHS II Compliant MSL Level: 1 Packaging A0 B0 W E F P0 P1 P2 D0 T K0 2.45 ±0.05 2.75 ±0.05 8.0 ±0.3 1.75 ±0.1 3.5 ±0.05 4.0 ±0.1 4.0 ±0.1 2.0 ±0.05 1.5 +0.1/-0.0 0.25 ±0.03 1.55 ±0.05 Dimensions: mm ATTENTION: Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information. LLC 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: www.abracon.com ABRACON IS REVISED: 06-22-20 ISO9001-2015 CERTIFIED