APT15D60KG

600V 15A APT15D60K APT15D60KG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (K) PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Popular TO-220 Package or Surface Mount D2 PAK Package • Low Forward Voltage • PFC • Low Leakage Current • Soft Recovery Characteristics • Low Noise Switching 1 • Cooler Operation 2 • Higher Reliability Systems 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified. Symbol Characteristic / Test Conditions VR Maximum D.C. Reverse Voltage APT15D60K(G) UNIT 600 Volts VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 133°C, Duty Cycle = 0.5) 15 RMS Forward Current (Square wave, 50% duty) 32 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 110 IF(RMS) IFSM TJ,TSTG TL Amps -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 15A 1.6 1.8 IF = 30A 1.9 IF = 15A, TJ = 125°C 1.4 Volts VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 Microsemi Website - http://www.microsemi.com 23 UNIT μA pF 053-6010 Rev L 3-2012 Symbol DYNAMIC CHARACTERISTICS Symbol APT15D60K(G) Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM trr IF = 1A, diF/dt = -100A/μs, VR = 30V, TJ = 25°C IF = 15A, diF/dt = -200A/μs Maximum Reverse Recovery Current VR = 400V, TC = 25°C Reverse Recovery Time Qrr IF = 15A, diF/dt = -200A/μs Reverse Recovery Charge IRRM trr Maximum Reverse Recovery Current VR = 400V, TC = 125°C Reverse Recovery Time Qrr IF = 15A, diF/dt = -1000A/μs Reverse Recovery Charge IRRM Maximum Reverse Recovery Current VR = 400V, TC = 125°C MIN TYP MAX - 21 - 80 - 95 - 3 - 150 ns - 520 nC - 7 - 60 ns - 810 nC - 22 Amps MIN TYP UNIT ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance WT 1.35 oz 1.9 g 10 lb•in 1.1 N•m Microsemi Reserves the right to change, without notice, the specifications and information contained herein. 0.7 0.80 0.5 Note: 0.60 0.3 0.40 t1 t2 t 0.20 0 053-6010 Rev L 3-2012 0.9 P DM Z JC, THERMAL IMPEDANCE (°C/W) θ 1.40 1.00 0.1 SINGLE PULSE 0.05 10 -5 10 Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 °C/W 0.07 Maximum Mounting Torque 1.20 UNIT 80 Package Weight Torque MAX APT15D60K(G) TYPICAL PERFORMANCE CURVES 180 50 40 30 TJ = 25°C TJ = 125°C 20 TJ = 150°C 10 trr, REVERSE RECOVERY TIME (ns) IF, FORWARD CURRENT (A) 60 TJ = -55°C 0 30A 1000 800 15A 600 400 7.5A 200 0 1.0 IRRM 0.8 7.5A 80 60 40 T = 125°C J V = 400V R 30A 25 20 15 15A 10 7.5A 5 Duty cycle = 0.5 T = 175°C J 35 trr Qrr 30 40 Qrr 0.6 0.4 15A 100 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 30 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/μs) trr 120 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 140 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/μs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) Qrr, REVERSE RECOVERY CHARGE (nC) R R 30A 0 0.5 1 1.5 2 2.5 3 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage T = 125°C J V = 400V 160 20 0 1200 T = 125°C J V = 400V 25 20 15 10 0.2 0.0 5 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 140 120 100 80 60 40 20 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6010 Rev L 3-2012 CJ, JUNCTION CAPACITANCE (pF) 160 APT15D60K(G) Vr APT5018BLL diF /dt Adjus t +18V 0V D.U.T. 30μH trr/Q rr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF/dt - Rate of Diode Current Change Through Zero Crossing. 1 3 IRRM - Maximum Reverse Recovery Current 4 Zer o 4 trr - Reverse Recovery Time measured from zero crossing where 5 3 diode current goes from positive to negative, to the point at 2 which the straight line through IRRM and 0.25, IRRM passes through zero. 5 Qrr - Area Under the Curve Defined by IRRM and tRR. Figure 10. Diode Reverse Recovery Waveform Definition TO-220 (K) Package Outline e3 100% Sn 0.404 [10.26] 0.393 [9.98] Cathode 0.114 [2.90] 0.102 [2.59] 0.186 [4.72] 0.174 [4.42] 0.058 [1.47] 0.047 [1.19] ø0.153 [3.89] ø0.149 [3.78] 0.508 [12.90] 0.492 [12.50] 0.362 [9.19] 0.354 [8.99] 0.154 [3.91] 0.134 [3.40] 0.531 [13.49] 0.515 [13.08] 0.110 [2.79] 0.099 [2.51] 0.057 [1.45] 0.047 [1.19] 053-6010 Rev L 3-2012 Cathode Anode 0.100 [2.54] TYP 0.204 [5.18] 0.196 [4.98] 0.034 [0.86] 0.030 [0.76] 0.018 [0.46] 0.014 [0.36] 0.25 I RRM