APT75DQ120BG

1200V 75A APT75DQ120B APT75DQ120S APT75DQ120BG* APT75DQ120SG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (B) PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • PFC TO -2 4 7 D 3 PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current 2 1 (S) 2 1 • Increased System Power Density • Avalanche Energy Rated 1 - Cathode 2 - Anode Back of Case - Cathode All Ratings: TC = 25°C unless otherwise specified. MAXIMUM RATINGS Symbol VR Characteristic / Test Conditions UNIT 1200 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 113°C, Duty Cycle = 0.5) IF(RMS) APT75DQ120B_S(G) 75 RMS Forward Current (Square wave, 50% duty) 121 IFSM Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 540 EAVL Avalanche Energy (1A, 40mH) TJ,TSTG TL Amps 20 mJ -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 75A 2.8 3.3 IF = 150A 3.48 IF = 75A, TJ = 125°C 2.17 Volts VR = 1200V 100 VR = 1200V, TJ = 125°C 500 Microsemi Website - http://www.microsemi.com 50 UNIT μA pF 053-4229 Rev D 5-2011 Symbol DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Time Qrr Reverse Recovery Charge trr Qrr IRRM IF = 1A, diF/dt = -100A/μs, VR = 30V, TJ = 25°C Maximum Reverse Recovery Current trr IRRM APT75DQ120B_S(G) Maximum Reverse Recovery Current IF = 75A, diF/dt = -200A/μs VR = 800V, TC = 25°C IF = 75A, diF/dt = -200A/μs VR = 800V, TC = 125°C Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 75A, diF/dt = -1000A/μs VR = 800V, TC = 125°C MIN TYP MAX UNIT - 32 - 325 - 715 - 5 - 420 ns - 3340 nC - 13 - 195 ns - 5810 nC - 42 Amps MIN TYP ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC WT Torque Characteristic / Test Conditions Junction-to-Case Thermal Resistance Package Weight MAX UNIT .31 °C/W 0.22 oz 5.9 g Maximum Mounting Torque 10 lb•in 1.1 N•m Microsemi reserves the right to change, without notice, the specifications and information contained herein. 0.30 0.25 0.7 0.20 0.5 0.15 0.10 0.3 0.05 0.1 0.05 0 053-4229 Rev D 5-2011 D = 0.9 Note: P DM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 t1 t2 t 10-5 SINGLE PULSE 10-4 Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION APT75DQ120B_S(G) TYPICAL PERFORMANCE CURVES 200 160 TJ = 175°C 140 120 TJ = 125°C 100 80 60 TJ = 25°C 40 TJ = -55°C 20 0 0 1.0 2.0 3.0 4.0 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 8000 T = 125°C J V = 800V R 7000 150A 6000 5000 75A 4000 3000 37.5A 2000 1000 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 37.5A 200 100 50 T = 125°C J V = 800V 150A R 40 30 75A 20 37.5A 10 140 Qrr Duty cycle = 0.5 T = 175°C J 120 100 trr 0.6 Qrr 0.2 0.0 300 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 5. Reverse Recovery Current vs. Current Rate of Change IRRM 0.4 75A 0 1.0 0.8 400 R 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/μs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/μs) trr T = 125°C J V = 800V 150A 0 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) 180 trr, REVERSE RECOVERY TIME (ns) 500 80 60 40 20 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 300 250 200 150 100 50 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-4229 Rev D 5-2011 CJ, JUNCTION CAPACITANCE (pF) 350 APT75DQ120B_S(G) Vr diF /dt Adjus t +18V APT10035LLL 0V D.U.T. 30μH trr/Q rr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF/dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current 4 trr - Reverse Recovery Time measured from zero crossing where 1 4 Zer o 5 0.25 I RR M 3 diode current goes from positive to negative, to the point at 2 which the straight line through IRRM and 0.25, IRRM passes through zero. 5 Qrr - Area Under the Curve Defined by IRRM and tRR. Figure 10. Diode Reverse Recovery Waveform Definition TO-247 Package Outline D3PAK Package Outline e3 100% Sn 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 1.00 (.039) 1.15(.045) Cathode 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.65 (.026) 0.40 (.016) 1.016 (.040) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.90 (.075) 2.10 (.083) 1.20 (.047) 1.40 (.055) 5.45 (.215) BSC (2 Plcs. ) 053-4229 Rev D Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches ) 13.30 (.524) 13.60(.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 4.50 (.177) Max . 5-2011 Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper Anode Cathode Dimensions in Millimeters (Inches) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated