HMC1000LP5E
v00.0411
Typical Applications
Features
The HMC1000LP5E is ideal for:
Tunable Stopband Frequency: 3.6-12.2 GHz
Tunable Stopband Rejection: 25 dB Typical
• Test & Measurement Equipment
Four Frequency Control Modes
• Military RADAR & EW/ECM
Single Chip Replacement For Mechanically Tuned
Designs
• Industrial & Medical Equipment
32 Lead 5 x 5 mm SMT Package
Functional Diagram
General Description
TE
• SATCOM & Space
LE
The HMC1000LP5E is a MMIC band reject filter which
features a user selectable band rejection frequency.
The -20 dB filter bandwidth is < 10%. The rejection
frequency can be varied between 3.6 and 12.2 GHz by
applying an analog tune voltage between 0 and 14V.
This tunable filter can be used as a much smaller SMT
alternative to physically large switched filter banks
and cavity tuned filters. The HMC1000LP5E has
excellent microphonics due to the monolithic design,
and provides a dynamically adjustable solution in
advanced communications applications.
B
SO
FILTERS - TUNABLE - SMT
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Electrical Specifications, TA = +25 °C
Parameter
Min.
Typ.
3.6
Max.
Units
12.2
GHz
Passband Frequency Range
0.1-25
GHz
O
Rejection Band Tuning Range
25
dB
Passband Insertion Loss
3
dB
Return Loss (passband and rejection band)
15
dB
Rejection Band Input IP3 (Pin = + 10 dBm)
23.5
dBm
Stopband Rejection
Passband Input IP3 (Pin = + 10 dBm)
35
dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 0V)
10
dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 7V)
13
dBm
Input Power @ 5° Shift In Insertion Phase (Vt1 = Vt2 = 14V)
>18
Frequency Control Voltage (Vfctl)
0
Source/Sink Current (Ifctl)
dBm
14
V
±1
mA
Residual Phase Noise [1] (100 kHz Offset)
-162
dBc/Hz
Rejection Band, Fcenter Drift Rate
-0.3
MHz/°C
< 200
ns
Tuning Speed, Phase Settling to within 10° [2]
[1] Optimum residual phase noise performance requires the use of a low noise driver circuit.
[2] Tuning speed includes 40 ns typical tuning voltage ramp from driver.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Tuning Mode 1, Full Band Frequency Tuning, (Vt1 = Vt2 = 0-14V)
Broadband Insertion Loss vs. Vt
Broadband Return Loss (S11) vs. Vt
RETURN LOSS (dB)
-10
-15
-20
-30
-35
0V
4V
8V
14V
-20
-30
S11 0V
S11 7V
S11 14V
-40
-40
0
2
4
6
8
10 12
14
16 18 20
22 24
0
26
2
4
6
8
12
14
16
18
20
22
24
26
LE
Broadband Return Loss (S22) vs. Vt
Rejection Band, Fcenter Vs. Temperature
14
0
-20
-30
B
SO
-10
S22 0V
S22 7V
S22 14V
-40
0
2
4
6
8
10
12
14
16
18
20
22
24
12
10
8
6
+25C
+85C
-40C
4
2
0
26
2
4
O
Rejection Vs. Temperature
6
8
10
12
14
Vt1 = Vt2 (Vdc)
FREQUENCY (GHz)
Rejection Bandwidth Vs. Vt1 = Vt2
50
50
+25C
+85C
-40C
BANDWIDTH (%)
45
REJECTION (dB)
10
FREQUENCY (GHz)
FREQUENCY (GHz)
RETURN LOSS (dB)
-10
TE
-25
REJECTION BAND, Fcenter (GHz)
INSERTION LOSS (dB)
-5
FILTERS - TUNABLE - SMT
0
0
40
35
30
45
- 10 dB BW
40
- 20 dB BW
35
30
25
20
15
10
25
5
0
20
0
2
4
6
8
Vt1 = Vt2 (Vdc)
10
12
14
0
2
4
6
8
10
12
14
Vt1 = Vt2 (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Tuning Mode 2, Low Band Tuning With Narrower Rejection Bandwidth (Vt1 = 0-14V, Vt2 = 0V)
Broadband Insertion Loss vs. Vt
Broadband return Loss (S11) vs. Vt
0
-5
-10
RETURN LOSS (dB)
-10
-15
-20
-25
4V
2
4
6
-25
-30
S11 0V
S11 7V
S11 14V
-40
-40
0
-20
-35
8V
0V
-35
-15
TE
14V
-30
8
10 12
14
16 18 20
22 24
-45
26
0
2
4
6
8
10
12
14
16
18
20
22
24
26
FREQUENCY (GHz)
LE
FREQUENCY (GHz)
Broadband Return Loss (S22) vs. Vt
Rejection Band, Fcenter Vs. Temperature
8
0
-5
-10
-20
-25
-30
-35
B
SO
-15
S22 0V
S22 7V
S22 14V
-40
-45
0
2
4
6
8
10
12
14
16
18
20
22
24
REJECTION BAND, Fcenter (GHz)
INSERTION LOSS (dB)
-5
RETURN LOSS (dB)
FILTERS - TUNABLE - SMT
0
7
6
5
4
+25C
+85C
-40C
3
2
0
2
4
6
26
8
10
12
14
Vt1 (Vdc)
FREQUENCY (GHz)
O
Rejection Vs. Temperature
Rejection Bandwidth Vs. Vt1
50
40
BANDWIDTH (%)
REJECTION (dB)
35
+25C
+85C
-40C
45
40
35
30
30
25
20
- 10 dB BW
- 20 dB BW
15
10
25
5
0
20
0
2
4
6
8
Vt1 (Vdc)
3
10
12
14
0
2
4
6
8
10
12
14
Vt1 (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Tuning Mode 3, High Band Tuning With Narrower Rejection Bandwidth (Vt1 = 14V, Vt2 = 0-14V)
-5
-10
-10
RETURN LOSS (dB)
0
-5
-15
-20
-30
-25
-30
-35
-35
0V
4V
8V
0
2
4
6
8
10 12
14V
14
S11 0V
S11 7V
S11 14V
-40
-40
16 18 20
22 24
-45
26
0
2
4
6
8
12
14
16
18
20
22
24
26
LE
Broadband Return Loss (S22) vs. Vt
Rejection Band, Fcenter Vs. Temperature
14
0
-5
-10
-20
-25
-30
B
SO
-15
-35
S22 0V
S22 7V
S22 14V
-40
-45
0
2
4
6
8
10
12
14
16
18
20
22
24
13
12
11
10
9
8
+25C
+85C
-40C
7
6
0
26
2
4
6
10
12
14
Rejection Bandwidth Vs. Vt2
O
Rejection Vs. Temperature
35
40
BANDWIDTH (%)
30
25
+25C
+85C
-40C
20
8
Vt2 (Vdc)
FREQUENCY (GHz)
REJECTION (dB)
10
FREQUENCY (GHz)
FREQUENCY (GHz)
RETURN LOSS (dB)
-20
TE
-25
-15
FILTERS - TUNABLE - SMT
Broadband return Loss (S11) vs. Vt
0
REJECTION BAND, Fcenter (GHz)
INSERTION LOSS (dB)
Broadband Insertion Loss vs. Vt
35
- 10 dB BW
30
- 20 dB BW
25
20
15
10
5
15
0
0
2
4
6
8
Vt2 (Vdc)
10
12
14
0
2
4
6
8
10
12
14
Vt2 (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Tuning Mode 4, Rejection Bandwidth Tuning (Vt1 = 0V, Vt2 = 0-14V)
Broadband Insertion Loss vs. Vt
Broadband Return Loss (S11) vs. Vt
0
-5
-5
-10
4V
-20
8V
-25
14V
-30
-20
-25
-30
-35
0V
-35
S11 0V
S11 7V
S11 14V
-40
-45
-40
0
2
4
6
8
10 12
14
16 18 20
22 24
0
26
2
4
6
8
10
16
18
20
22
24
26
LE
0
10
-5
9
-20
-25
-30
B
SO
-15
-35
-45
0
2
4
6
8
10
12
14
16
18
20
22
24
8
7
6
5
4
3
S22 0V
S22 7V
S22 14V
-40
+25C
+85C
-40C
2
1
26
0
1
2
3
4
5
6
O
FREQUENCY (GHz)
Rejection Vs. Temperature, Vt2 = 14V
1600
-5
1400
-10
-15
-20
+25C
+85C
-40C
-30
8
9
10
11
12
13
14
Tuning Sensitivity Vs. Vt
0
-25
7
Vt2 (Vdc)
SENSITIVITY (MHz/VOLT)
INSERTION LOSS (dB)
14
Rejection Bandwidth Vs. Temperature
Insertion Loss = - 10 dB
Broadband return Loss (S22) vs. Vt
-10
Mode 1
Mode 2
Mode 3
Mode 4
1200
1000
800
600
400
200
-35
0
0
2
4
6
8
10
12
14
16
FREQUENCY (GHz)
5
12
FREQUENCY (GHz)
FREQUENCY (GHz)
RETURN LOSS (dB)
-15
TE
-15
RETURN LOSS (dB)
-10
BANDWIDTH (GHz)
INSERTION LOSS (dB)
FILTERS - TUNABLE - SMT
0
18
20
22
24
26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Vt (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Rejection Band, Input IP3,
Pin = +10 dBm
Passband, Input IP3
Pin = +10 dBm
55
45
INPUT IP3 (dBm)
35
30
20
40
35
30
2 GHz
18 GHz
24 GHz
25
15
10
20
0
2
4
6
8
10
12
14
0
-120
-170
-180
1e+2
10
12
14
+25C
+85C
-40C
1e+3
1e+4
1e+5
1e+6
-130
+25C
+85C
-40C
-140
-150
-160
-170
-180
1e+2
1e+7
1e+3
O
OFFSET FREQUENCY (Hz)
Rejection Band, Insertion Phase vs. Pin
1e+4
1e+5
1e+6
1e+7
OFFSET FREQUENCY (Hz)
Rejection Band, Fcenter vs. Pin
25
80
20
60
15
FREQUENCY (MHz)
INSERTION PHASE (DEGREES)
8
Passband, Residual Phase Noise
@ 17 GHz, Vt1 = Vt2 = 0V
B
SO
-160
6
-120
-130
-150
4
Vt1 = Vt2 (Vdc)
Passband, Residual Phase Noise
@ 4 GHz, Vt1 = Vt2 = 14V
-140
2
LE
Vt1 = Vt2 (Vdc)
RESIDUAL PHASE NOISE (dBc/Hz)
45
TE
25
RESIDUAL PHASE NOISE (dBc/Hz)
INPUT IP3 (dBm)
50
+25C
+85C
-40C
40
FILTERS - TUNABLE - SMT
50
10
5
0
-5
-10
VT1=Vt2=0V
Vt1=Vt2=7V
Vt1=Vt2=10V
Vt1=Vt2=14V
-15
-20
-25
0
2
4
6
8
40
20
0
-20
-40
Vt1=Vt2=0V
Vt1=Vt2=7V
Vt1=Vt2=10V
Vt1=Vt2=14V
-60
10
12
INPUT POWER (dBm)
14
16
18
-80
0
2
4
6
8
10
12
14
16
18
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC1000LP5E
3.6 - 12.2 GHz
Four Operation Modes And
The Control Conditions
Reliability Information
Vt1
Vt2
Description
I
0 -14V
Vt1 = Vt2
0 -14V
Vt1 = Vt2
Full band frequency tuning
0 - 14V
0V
III
14V
0 - 14V
High band frequency tuning, with
narrower rejection bandwidth
IV
0V
0 - 14V
Rejection bandwidth tuning
Absolute Maximum Ratings
150 °C
Nominal Junction Temperature
(T = 85 °C and Pin = 10 dBm)
86 °C
Thermal Resistance
(Junction To Ground Paddle)
40° C/W
Operating Temperature
-40 to +85 °C
LE
II
Low band frequency tuning, with
narrower rejection bandwidth
Junction Temperature to Maintain
1 Million Hour MTTF
TE
Mode
Frequency Control Voltage (Vfctl)
-0.5 to +15V
RF Power Input
28.5 dBm
Storage Temperature
-65 to +150 °C
ESD Sensitivity (HBM)
Class 1 A
B
SO
FILTERS - TUNABLE - SMT
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
O
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. Pin BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
FILTERS - TUNABLE - SMT
LE
TE
Outline Drawing
B
SO
Pin BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC1000LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H1000
XXXX
O
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
Pin Descriptions
Description
1-4, 7-11, 13, 15-18,
21-25, 27-32
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
5, 20, 26
GND
These pins and exposed paddle
must be connected to RF/DC ground.
6
RFIN
This pin is AC coupled and
matched to 50 Ohms.
12, 14
Vt1, Vt2
Center frequency control voltage.
19
RFOUT
This pin is AC coupled and
matched to 50 Ohms.
O
B
SO
Application Circuit
Interface Schematic
TE
Function
LE
FILTERS - TUNABLE - SMT
Pin Number
9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1000LP5E
3.6 - 12.2 GHz
FILTER - TUNABLE, BAND REJECT SMT
3.6 - 12.2 GHz
FILTERS - TUNABLE - SMT
B
SO
LE
TE
Evaluation PCB
O
List of Materials for Evaluation PCB EVAL01-HMC1000LP5E [1]
Item
Description
J1, J2
Connector, 2.9 mm, Jack
J3, J4, J5
DC Pin
U1
HMC1000LP5E, Band Reject FilterTunable
PCB [2]
600-00121-00 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 25FR
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohms impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10