HMC190BMS8 / 190BMS8E
v00.0213
SWITCHES - SPDT - SMT
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Typical Applications
Features
The HMC190BMS8(E) is ideal for:
Low Insertion Loss: 0.4 dB
• MMDS & WirelessLAN
Ultra Small Package: MSOP8
• Portable Wireless
High Input IP3: +56 dBm
Positive Control: 0/+3V @ 0.1 µA
General Description
Functional Diagram
The HMC190BMS8(E) is a low cost SPDT switch
in a 8-lead MSOP package. The switch can control
signals from DC to 3 GHz. It is especially suited for
low and medium power applications using positive
control voltages. The two control voltages require
a minimal amount of DC current, which is optimal
for battery powered radio systems at 0.9, 1.9, and
2.4 GHz. The HMC190BMS8(E) provides exceptional third order intermodulation performance of
+56 dBm. The design has been optimized for the
small MSOP package, and maintains a VSWR of
better than 1.2:1 up to 2 GHz. This device is the
positive control MSOP8 packaged version of our
HMC239AS8(E) negative control device.
Electrical Specifications, TA = +25° C, Vctl = 0/+3 to +8 Vdc
Parameter
Min.
Typ.
Max.
Units
0.4
0.4
0.5
0.7
0.6
0.6
0.8
1.0
dB
dB
dB
dB
Insertion Loss
DC - 1.0 GHz
DC - 2.0GHz
DC - 2.5GHz
DC - 3.0 GHz
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
23
23
22
19
30
30
30
25
dB
dB
dB
dB
Return Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
24
20
15
10
30
24
20
16
dB
dB
dB
dB
Input Power for 1 dB Compression
(Vctl = 0/+5V)
0.5 - 1.0 GHz
0.5 - 3.0 GHz
25
23
30
29
dBm
dBm
Input Third Order Intercept
(Vctl = 0/+5V) Two-tone Input Power = +10 dBm Each Tone)
0.5 - 1.0 GHz
0.5 - 3.0 GHz
45
44
56
55
dBm
dBm
Switching Characteristics
DC - 3.0 GHz
5
10
ns
ns
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
1
Frequency
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC190BMS8 / 190BMS8E
v00.0213
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Insertion Loss
Isolation
0
-10
-1
ISOLATION (dB)
INSERTION LOSS (dB)
-0.5
-1.5
-2
-20
-30
-40
-2.5
-3
-50
0
0.5
1
1.5
2
2.5
3
0
0.5
1
FREQUENCY (GHz)
+25C
1.5
2
2.5
3
FREQUENCY (GHz)
+85C
-40C
RF1
RF2
Return Loss
0
RETURN LOSS (dB)
-10
SWITCHES - SPDT - SMT
0
-20
-30
-40
-50
0
0.5
1
1.5
2
2.5
3
FREQUENCY (GHz)
RFC
Input 0.1 and 1.0 dB
Compression vs. Control Voltage
RF1, RF2
Input Third Order
Intercept Point vs. Control Voltage
62
60
30
IP3 (dBm)
P1dB & P0.1dB (dBm)
35
25
20
58
56
54
15
52
3
4
5
6
7
8
9
3
4
5
6
7
8
9
CONTROL INPUT (V)
CONTROL INPUT (V)
0.1 dB at 900 MHz
0.1 dB at 1900 MHz
1 dB at 900 MHz
1 dB at 1900 MHz
900 MHz
1900 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC190BMS8 / 190BMS8E
v00.0213
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Distortion vs. Control Voltage
Third Order Intercept (dBm)
+10 dBm Each Tone
SWITCHES - SPDT - SMT
Control Input
(Vdc)
900 MHz
+5
58
1900 MHz
56
+8
56
55
Compression vs. Control Voltage
Carrier at 900 MHz
Carrier at 1900 MHz
Control
Input
Input Power
for 0.1 dB
Compression
Input Power
for 1.0 dB
Compression
Input Power
for 0.1 dB
Compression
Input Power
for 1.0 dB
Compression
(Volts)
(dBm)
(dBm)
(dBm)
(dBm)
+3
20
23
21
24
+5
27
30
27
30
+8
32
34
32
34
Truth Table
*Control Input Voltage Tolerances are ± 0.2 Vdc.
Control Input*
Control Current
A
(Vdc)
B
(Vdc)
Ia
(µA)
Ib
(µA)
Signal Path State
RF to RF1
RF to RF2
OFF
0
+3
-0.1
0.1
ON
+3
0
0.1
-0.1
OFF
ON
0
+5
-1
1
ON
OFF
+5
0
1
-1
OFF
ON
0
+8
-5
5
ON
OFF
+8
0
5
-5
OFF
ON
Caution: Do not operate in 1 dB compression at power levels above +31 dBm (Vctl = +5 Vdc) and do not “hot switch” power levels
greater than +20dBm (Vctl = +5 Vdc).
DC blocks are required at ports RFC, RF1 and RF2.
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC190BMS8 / 190BMS8E
v00.0213
GaAs MMIC SPDT SWITCH
DC - 3 GHz
Absolute Maximum Ratings
0.5 GHz
0.5 - 2 GHz
+27 dBm
+34 dBm
Control Voltage Range (A & B)
-0.2 to +12 Vdc
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
SWITCHES - SPDT - SMT
Max. Input Power
VCTL = 0/+8V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC190BMS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC190BMS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H190B
XXXX
H190B
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC190BMS8 / 190BMS8E
v00.0213
GaAs MMIC SPDT SWITCH
DC - 3 GHz
SWITCHES - SPDT - SMT
Typical Application Circuit
Notes:
1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 5 to 8 Volts applied to the CMOS logic gates.
3. DC blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is achieved with Vdd = +8V and A/B set to 0/+8V.
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC190BMS8 / 190BMS8E
v00.0213
GaAs MMIC SPDT SWITCH
DC - 3 GHz
SWITCHES - SPDT - SMT
Evaluation Circuit Board
List of Materials for Evaluation PCB EVAL01-HMC190BMS8 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J6 - J8
DC Pin
C1 - C3
330 pF Capacitor, 0402 Pkg.
R1 - R2
1 KOhm Resistor, 0402 Pkg.
U1
HMC190BMS8(E) SPDT Switch
PCB [2]
600-00702-00-01 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 Ohm impedance and the package ground leads
and package bottom should be connected directly
to the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6