HMC622LP4E

HMC622LP4 / 622LP4E v01.0508 Features The HMC622LP4 / HMC622LP4E is ideal for: High Input IP3: +23 dBm • PCS / 3G Infrastructure Low Input LO Drive: 0 to +6 dBm • Base Stations & Repeaters High LO to RF Isolation: 33 dB • WiMAX & WiBro High Conversion Gain: 9 dB • Broadband & Fixed Wireless Can be used for upconversion or downconversion TE Typical Applications 24 Lead 4x4mm SMT Package: 16mm2 Functional Diagram General Description LE The HMC622LP4E is a highly integrated converter IC that operates from 1.8 to 3.9 GHz for both upconversion and downconversion applications. The HMC622LP4E incorporates a high dynamic range, double-balanced mixer core with integrated LO and IF amplifiers, making it ideal for compact transceiver applications in GSM, WCDMA, TD-SCDMA, WiBro and WiMAX. This versatile converter RFIC operates with a low LO input power level of only +3 dBm, provides up to 10 dB conversion gain, and exhibits +23 dBm Input IP3 in downconversion mode. This RFIC provides up to 12 dB conversion gain in upconverter mode. Specific evaluation boards are available for both upconversion and downconversion modes. B SO MIXERS - HIGH IP3 - SMT 9 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz O Electrical Specifi cations, TA = +25° C, LO = +3 dBm, VddIF = BIAS = +5V* Parameter Min. Frequency Range, RF, LO Frequency Range, IF Conversion Gain 5 Noise Figure (SSB), IF=468 MHz Typ. Max. Units 1.8 - 3.9 GHz 200 - 550 MHz 9 dB 10 dB dB LO to RF Isolation 27 33 LO to IF Isolation 3 11 dB IP3 (Input) 23 dBm 1 dB Compression (Input), IF=400 MHz 12 dBm LO Drive Input Level (Typical) 0 to +6 Supply Current (IddIF + IBIAS) 175 dBm 220 mA *Unless otherwise noted, all measurements performed as a downconverter and confi gured as shown in the downconverter mode application circuit, IF=250 MHz 9 - 372 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Conversion Gain vs. Temperature Isolation 10 RF to IF LO to RF LO to IF 0 10 ISOLATION (dB) 5 +25C +85C -40C 0 -10 -20 9 -30 TE CONVERSION GAIN (dB) 15 -5 -50 1 1.5 2 2.5 3 3.5 4 4.5 1 2 3 3.5 4 4.5 4 4.5 Return Loss 15 0 B SO 5 LO= -3 dBm LO= 0 dBm LO= +3 dBm LO= +6 dBm LO= +9 dBm 0 1 1.5 2 2.5 3 3.5 4 RETURN LOSS (dB) -5 10 -5 -10 -15 -20 RF LO -25 -30 4.5 1 1.5 2 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive O 10 RESPONSE (dB) LO= -3 dBm LO= 0 dBm LO= +3 dBm LO= +6 dBm LO= +9 dBm 2 2.5 3 5 Conversion Gain Return Loss 0 -5 -10 -5 1.5 3.5 15 5 1 3 IF Bandwidth, LO = 2 Ghz 10 0 2.5 FREQUENCY (GHz) 15 CONVERSION GAIN (dB) 2.5 LE Conversion Gain vs. LO Drive CONVERSION GAIN (dB) 1.5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) MIXERS - HIGH IP3 - SMT -40 3.5 4 4.5 RF FREQUENCY (GHz) -15 0.2 0.3 0.4 0.5 0.6 IF FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 373 HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Input IP3 vs. LO Drive 35 35 30 30 25 25 IP3 (dBm) 20 +25C +85C - 40C 15 15 10 -3 dBm 0 dBm +3 dBm +6 dBm +9 dBm 10 5 5 1 1.5 2 2.5 3 3.5 4 4.5 1 1.5 2 Input IP2 vs. Temperature 90 3.5 4 4.5 4 4.5 90 80 80 60 +25C +85C - 40C 50 40 30 1 1.5 2 2.5 3 3.5 4 IP2 (dBm) 70 B SO 70 60 - 3 dBm 0 dBm +3 dBm +6 dBm +9 dBm 50 40 30 4.5 O Input P1dB vs. Temperature, IF= 250 MHz 1 1.5 2 15 2.5 3 3.5 RF FREQUENCY (GHz) Input P1dB vs. Temperature, IF= 400 MHz 18 18 +25C +85C - 40C 15 12 P1dB (dBm) P1dB (dBm) 3 Input IP2 vs. LO Drive RF FREQUENCY (GHz) 9 12 9 6 6 3 3 0 +25C +85C -40C 0 1 1.5 2 2.5 3 3.5 4 4.5 RF FREQUENCY (GHz) 9 - 374 2.5 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) IP2 (dBm) MIXERS - HIGH IP3 - SMT 20 TE 9 IP3 (dBm) Input IP3 vs. Temperature 1 1.5 2 2.5 3 3.5 4 4.5 RF FREQUENCY (GHz) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz MxN Spurious @ IF Port Harmonics of LO 0 1 2 0 1 xx 1 6 0 2 83 47 nLO Spur @ RF Port 3 4 LO Freq. (GHz) 1 2 3 38 18 336 27 47 66 41 57 68 1.8 4 1.4 39 20 26 37 1.6 35 17 28 27 34 17 38 38 114 113 74 60 77 2.0 32 17 33 42 4 118 119 119 94 99 2.2 33 18 27 44 2.6 33 26 35 41 3.0 31 17 38 40 3.4 33 19 37 39 3.8 31 26 38 43 TE 3 RF Freq. = 2.1 GHz @ -10 dBm LO Freq. = 2.0 GHz @ +3 dBm All values in dBc relative to the IF power level. Absolute Maximum Ratings +22 dBm LO Drive (BIAS = +5V) +10 dBm IFIN +15 dBm BIAS +7 Vdc Vdd IF Typical Supply Current VddIF, BIAS IddIF + IBIAS +5 175 mA B SO RF / MIX IF Input (VddIF = +5V) LE LO = +3 dBm All values in dBc below input LO level measured at RF port. +8 Vdc 150 °C Continuous Pdiss (T = 85°C) (derate 14.9 mW/°C above 85°C) 0.97 W Thermal Resistance (junction to ground paddle) 67.2 °C/W Storage Temperature -65 to +150°C Operating Temperature -40 to +85°C ESD Sensitivity (HBM) Class 1A O Junction Temperature 9 MIXERS - HIGH IP3 - SMT nLO mRF ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 375 HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Outline Drawing TE LE NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. B SO MIXERS - HIGH IP3 - SMT 9 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC622LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC622LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H622 XXXX [2] H622 XXXX O [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Descriptions 9 - 376 Pin Number Function Description 1, 2, 4, 5, 6, 8, 11, 14, 15, 19, 20, 22 - 24 N/C No connection. These pins may be connected to RF ground. Performance will not be affected. 3 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Description 7 IFIN This pin is matched to 50 ohms with a 51nH inductor to ground. See Application Circuit. Interface Schematic 9 CAP AC ground. An external capacitor of 0.01 μF to ground is required for low frequency bypassing. See application circuit for further details. 10 MIXIF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 18 mA of current or part non-function and possible part failure will result. 12 IFOUT 13 VddIF LE TE Function This pin is AC coupled and matched to 50 Ohms. Power supply for IF amplifier. Choke inductor and bypass capacitor are required. See application circuit. B SO Pin Number (Continued) MIXLO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. 17 GND Backside of package has exposed metal ground paddle that must also be connected to ground. 18 BIAS Power supply and RF Output of the LO amplifier. Three external bypass capacitors are recommended for optimum performance, as illustrated in the application circuit. 21 LO This pin is DC coupled and matched to 50 Ohms. An off chip DC blocking capacitor is required. See application circuit. O 16 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 MIXERS - HIGH IP3 - SMT Pin Descriptions 9 - 377 HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Evaluation PCB - Upconverter Mode B SO LE MIXERS - HIGH IP3 - SMT TE 9 List of Materials for Evaluation PCB 119244 [1] Item PCB Mount SMA RF Connector O J1 - J3 Description J4 DC Pin C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg. C4, C6 1000 pF Chip Capacitor, 0603 Pkg. C5, C7 2.2 μF Capacitor, Tantalum C8 0.01 μF Chip Capacitor, 0402 Pkg. L1 51 nH Chip Inductor, 0402 Pkg. L2 18 nH Chip Inductor, 0402 Pkg. L3 36 nH Chip Inductor, 0603 Pkg. R1, R3, R4 0 Ohm Resistor, 0402 Pkg. R5 18 Ohm Resistor, 1210 Pkg. U1 HMC622LP4(E) - Upconverter PCB [2] 119242 Evaluation Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9 - 378 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz 9 MIXERS - HIGH IP3 - SMT B SO LE TE Evaluation PCB - Downconverter Mode List of Materials for Evaluation PCB 119328 [1] Item PCB Mount SMA RF Connector O J1 - J3 Description J4 DC Pin C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg. C4, C6 1000 pF Chip Capacitor, 0603 Pkg. C5, C7 2.2 μF Capacitor, Tantalum C8 0.01 μF Chip Capacitor, 0402 Pkg. L1 51 nH Chip Inductor, 0402 Pkg. L2 18 nH Chip Inductor, 0402 Pkg. L3 36 nH Chip Inductor, 0603 Pkg. R2, R3, R4 0 Ohm Resistor, 0402 Pkg. R5 18 Ohm Resistor, 1210 1/8 watt Pkg. U1 HMC622LP4(E) - Downconverter PCB [2] 119242 Evaluation Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 379 HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz Application Circuit - Upconverter Mode O B SO LE MIXERS - HIGH IP3 - SMT TE 9 Recommended Components Values (IF = 200 - 550 MHz) 9 - 380 C1, C2, C3 100 pF Capacitor C4, C6 1000 pF Capacitor C5, C7 2.2 μF Capacitor, Tantalum C8 0.01 μF Capacitor L1 51 nH Inductor L2 18 nH Inductor L3 36 nH Inductor R5 18 Ohm (1/8 Watt) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC622LP4 / 622LP4E v01.0508 GaAs MMIC MIXER w/ INTEGRATED IF & LO AMPLIFIER, 1.8 - 3.9 GHz MIXERS - HIGH IP3 - SMT 9 O B SO LE TE Application Circuit - Downconverter Mode Recommended Components Values (IF = 200 - 550 MHz) C1, C2, C3 100 pF Capacitor C4, C6 1000 pF Capacitor C5, C7 2.2 μF Capacitor, Tantalum C8 0.01 μF Capacitor L1 51 nH Inductor L2 18 nH Inductor L3 36 nH Inductor R5 18 Ohm (1/8 Watt) For price, delivery, and to place orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave Corporation: One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 9 - 381