Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Product Highlights
•
•
•
•
•
AEC-Q100 Qualification for /V Devices
Reinforced Galvanic Isolation for Digital Signals
• 16-QSOP with 4mm Creepage and Clearance
• Withstands 3kVRMS for 60s (VISO)
• Continuously Withstands 445VRMS (VIOWM)
• Withstands ±10kV Surge Between GNDA and
GNDB with 1.2/50μs Waveform
• High CMTI (50kV/μs, typ)
Low Power Consumption
• 0.71mW per Channel at 1Mbps with VDD = 1.8V
• 1.34mW per Channel at 1Mbps with VDD = 3.3V
• 3.21mW per Channel at 100Mbps with VDD = 1.8V
Low Propagation Delay and Low Jitter
• Maximum Data Rate up to 200Mbps
• Low Propagation Delay 7ns (typ) at VDD = 3.3V
• Clock Jitter RMS 11.1ps (typ)
Safety Regulatory Approvals
• UL According to UL1577
• cUL According to CSA Bulletin 5A
• VDE 0884-11 Reinforced Insulation (Pending)
Key Applications
•
Automotive
• Hybrid Electric Vehicle
• Chargers
• Battery Management System (BMS)
• Inverters
The MAX22163−MAX22166 are a family of six-channel,
reinforced, fast, low-power digital galvanic isolators
using Analog Devices’ proprietary process technology.
All devices feature reinforced isolation with a withstand
voltage rating of 3kVRMS for 60 seconds. Both
automotive and general-purpose devices are rated for
operation at ambient temperature from -40°C to +125°C.
Devices with /V suffix are AEC-Q100 qualified. See the
Ordering Information for all automotive grade part
numbers.
•
Industrial
• Isolated SPI, RS-232/422/485, CAN, Digital I/O
• Fieldbus Communications
• Motor Control
• Medical Systems
These devices transfer digital signals between circuits
with different power domains, using as little as 0.71mW
per channel at 1Mbps (1.8V supply). The low-power
MAX22163–MAX22166
Simplified Application Diagram
3.3 V
5V
0.1 μF
VDDA
VDD
24V
0.1μF
GPO
IN1
OUT1
SYNCH
CS
IN2
OUT2
CS
SCLK
IN3
OUT3
CLK
MI CRO
MOSI
CONTROLLER
GPI
MI SO
IN4
MAX22164B/C OUT4
DOI4
DOI3
DOI2
MAX14906
DOI1
SDI
IN5
FAULT
OUT6
IN6
SDO
GNDA
GNDB
OUT5
0.1μF
VDD
VL
VDDB
A0
A1
GND
GND
Pin Description
MAX2216_B/C/E/F
+
VDDA
1
16 VDDB
IN1
2
15 OUT1
IN2
3
14 OUT2
IN3
4
13 OUT3
IN4/OUT4
5
12 OUT4/ IN4
IN5/OUT5
6
11 OUT5/ IN5
IN6/OUT6
7
10 OUT6/ IN6
GNDA
8
9
GNDB
QSOP
feature reduces system dissipation, increases reliability,
and enables compact designs. Devices are available
with a maximum data rate of either 25Mbps or 200Mbps
and with default-high or default-low outputs. The devices
feature low propagation delay and low clock jitter, which
reduces system latency.
Independent 1.71V to 5.5V supplies on each side also
make the devices suitable for use as level translators.
The MAX22163 features three channels transmitting
digital signals in one direction and three in opposite; the
MAX22164 offers four channels transmitting digital
signals in one direction and two in opposite; the
MAX22165 provides five channels transmitting digital
signals in one direction and one in opposite; the
MAX22166 features all six channels transmitting digital
signals in one direction.
Ordering Information appears at end of data sheet.
19-101240; Rev 6; 11/23
© 2023 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Absolute Maximum Ratings
VDDA to GNDA ...................................................... -0.3V to +6V
__OUT_ on Side B to GNDB ......................................... ±30mA
VDDB to GNDB ...................................................... -0.3V to +6V
Continuous Power Dissipation (TA = +70°C)
IN_ on Side A, ENA, DEFA to GNDA ................... -0.3V to +6V
__QSOP (derate 8.98mW/°C above +70°C) ........... 718.78mW
IN_ on Side B, ENB, DEFB to GNDB ................... -0.3V to +6V
Temperature Ratings
OUT_ on Side A to GNDA .................... -0.3V to (VDDA + 0.3V)
__Operating Temperature Range................... -40°C to +125°C
OUT_ on Side B to GNDB .................... -0.3V to (VDDB + 0.3V)
__Maximum Junction Temperature ............................... +150°C
__Storage Temperature Range ...................... -60°C to +150°C
Short-Circuit Continuous Current
__OUT_ on Side A to GNDA ......................................... ±30mA
__Lead Temperature (soldering, 10s) ........................... +300°C
__Soldering Temperature (reflow) ................................. +260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or
any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Package Information
PACKAGE TYPE: 16 QSOP
Package Code
E16MS+2
Outline Number
21-0055
Land Pattern Number
90-0167
THERMAL RESISTANCE, FOUR LAYER BOARD:
Junction-to-Ambient (θJA)
111.30°C/W
Junction-to-Case Thermal Resistance (θJC)
57.50°C/W
Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed
information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or ““ in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the
package regardless of RoHS status.
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 3
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
DC Electrical Characteristics
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB - VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 1, 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
SUPPLY VOLTAGE
Supply Voltage
Undervoltage-Lockout
Threshold
Undervoltage-Lockout
Threshold Hysteresis
VDDA
Relative to GNDA
1.71
5.5
VDDB
Relative to GNDB
1.71
5.5
VDD rising
1.5
VUVLO_
VUVLO_HYST
1.6
1.66
45
V
V
mV
MAX22163 SUPPLY CURRENT (Note 2)
500kHz square
wave, CL = 0pF
Side A Supply Current
IDDA
50MHz square
wave, CL = 0pF
500kHz square
wave, CL = 0pF
Side B Supply Current
IDDB
50MHz square
wave, CL = 0pF
VDDA = 5V
1.23
2.28
VDDA = 3.3V
1.22
2.25
VDDA = 2.5V
1.21
2.24
VDDA = 1.8V
1.18
1.97
VDDA = 5V
7.83
10.26
VDDA = 3.3V
6.47
8.71
VDDA = 2.5V
5.90
8.03
VDDA = 1.8V
5.35
7.10
VDDB = 5V
1.23
2.28
VDDB = 3.3V
1.22
2.25
VDDB = 2.5V
1.21
2.24
VDDB = 1.8V
1.18
1.97
VDDB = 5V
7.83
10.26
VDDB = 3.3V
6.47
8.71
VDDB = 2.5V
5.90
8.03
VDDB = 1.8V
5.35
7.10
VDDA = 5V
1.09
2.01
VDDA = 3.3V
1.07
1.99
VDDA = 2.5V
1.06
1.98
VDDA = 1.8V
1.04
1.66
VDDA = 5V
7.63
10.10
VDDA = 3.3V
6.67
9.01
VDDA = 2.5V
6.28
8.52
VDDA = 1.8V
5.84
7.67
VDDB = 5V
1.38
2.55
VDDB = 3.3V
1.36
2.52
VDDB = 2.5V
1.35
2.51
VDDB = 1.8V
1.32
2.28
VDDB = 5V
8.04
10.38
VDDB = 3.3V
6.27
8.41
mA
mA
MAX22164 SUPPLY CURRENT (Note 2)
500kHz square
wave, CL = 0pF
Side A Supply Current
IDDA
50MHz square
wave, CL = 0pF
Side B Supply Current
IDDB
500kHz square
wave, CL = 0pF
50MHz square
wave, CL = 0pF
www.analog.com
19-101240; Rev 6; 11/23
mA
mA
Analog Devices | 4
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB - VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 1, 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
VDDB = 2.5V
5.54
7.53
VDDB = 1.8V
4.87
6.53
VDDA = 5V
0.94
1.74
VDDA = 3.3V
0.93
1.72
VDDA = 2.5V
0.92
1.71
VDDA = 1.8V
0.90
1.34
VDDA = 5V
7.44
9.96
VDDA = 3.3V
6.88
9.31
VDDA = 2.5V
6.64
9.03
VDDA = 1.8V
6.32
8.23
VDDB = 5V
1.53
2.82
VDDB = 3.3V
1.50
2.79
VDDB = 2.5V
1.50
2.78
VDDB = 1.8V
1.45
2.59
VDDB = 5V
8.36
10.64
VDDB = 3.3V
6.16
8.19
VDDB = 2.5V
5.24
7.10
VDDB = 1.8V
4.45
6.01
VDDA = 5V
0.79
1.47
VDDA = 3.3V
0.78
1.45
VDDA = 2.5V
0.78
1.44
VDDA = 1.8V
0.75
1.02
VDDA = 5V
7.25
9.81
VDDA = 3.3V
7.08
9.61
VDDA = 2.5V
7.00
9.52
VDDA = 1.8V
6.78
8.79
VDDB = 5V
1.67
3.09
VDDB = 3.3V
1.65
3.06
VDDB = 2.5V
1.64
3.05
VDDB = 1.8V
1.59
2.89
VDDB = 5V
8.57
10.81
VDDB = 3.3V
5.97
7.91
VDDB = 2.5V
4.89
6.62
VDDB = 1.8V
3.97
5.44
UNITS
MAX22165 SUPPLY CURRENT (Note 2)
500kHz square
wave, CL = 0pF
Side A Supply Current
IDDA
50MHz square
wave, CL = 0pF
500kHz square
wave, CL = 0pF
Side B Supply Current
IDDB
50MHz square
wave, CL = 0pF
mA
mA
MAX22166 SUPPLY CURRENT (Note 2)
500kHz square
wave, CL = 0pF
Side A Supply Current
IDDA
50MHz square
wave, CL = 0pF
500kHz square
wave, CL = 0pF
Side B Supply Current
IDDB
50MHz square
wave, CL = 0pF
mA
mA
LOGIC INTERFACE (IN_, OUT_)
Input High Voltage
www.analog.com
VIH
2.25V ≤ VDD_ ≤ 5.5V
19-101240; Rev 6; 11/23
0.7 x
VDD_
V
Analog Devices | 5
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB - VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 1, 3)
PARAMETER
SYMBOL
CONDITIONS
1.71V ≤ VDD_ < 2.25V
Input Low Voltage
Input Hysteresis
VIL
VHYS
MIN
TYP
MAX
UNITS
0.75 x
VDD_
2.25V ≤ VDD_ ≤ 5.5V
0.8
1.71V ≤ VDD_ < 2.25V
0.7
MAX2216_B/E
410
MAX2216_C/F
80
V
mV
Input Pullup Current
IPU
MAX2216_B/C
-10
-5
-1.5
µA
Input Pulldown Current
IPD
MAX2216_E/F
1.5
5
10
µA
Input Capacitance
CIN
fSW = 1MHz
2
Output Voltage High
VOH
IOUT = -4mA source
Output Voltage Low
VOL
IOUT = 4mA sink
pF
VDD_ 0.4
V
0.4
V
Dynamic Characteristics - MAX2216_C/F
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB - VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 2, 4)
PARAMETER
Common-Mode
Transient Immunity
Maximum Data Rate
SYMBOL
CMTI
DRMAX
CONDITIONS
MIN
IN_ = GND_ or VDD_ (Note 5)
TYP
50
2.25V ≤ VDD_ ≤ 5.5V
200
1.71V ≤ VDD_ < 2.25V
150
PWMIN
IN_ to OUT_
tPLH
tPLH
IN_ to OUT_,
CL = 15pF
IN_ to OUT_,
CL = 15pF
ns
6.67
4.5V ≤ VDD_ ≤ 5.5V
4.4
6.2
9.5
3.0V ≤ VDD_ ≤ 3.6V
4.8
7.0
11.2
5.3
8.3
14.7
7.1
12.3
22.1
4.6
6.5
9.9
5.0
7.3
11.6
5.4
8.5
14.9
7.2
12.1
21.8
0.4
2.0
0.4
2.0
0.3
2.0
0
2.0
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
Propagation Delay
(Figure 1)
3.0V ≤ VDD_ ≤ 3.6V
tPHL
IN_ to OUT_,
CL = 15pF
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
3.0V ≤ VDD_ ≤ 3.6V
Pulse Width Distortion
PWD
tSPLH
www.analog.com
|tPLH - tPHL|
kV/µs
5
5.5V
1.71V ≤ VDD_ <
2.25V
Propagation Delay
(Figure 1)
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
19-101240; Rev 6; 11/23
UNITS
Mbps
2.25V ≤ VDD_ ≤
Minimum Pulse Width
MAX
3.7
ns
ns
ns
ns
Analog Devices | 6
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB - VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 2, 4)
PARAMETER
SYMBOL
MIN
TYP
4.7
2.25V ≤ VDD_ ≤ 2.75V
6.9
1.71V ≤ VDD_ ≤ 1.89V
12.1
4.5V ≤ VDD_ ≤ 5.5V
4.0
3.0V ≤ VDD_ ≤ 3.6V
4.9
2.25V ≤ VDD_ ≤ 2.75V
7.0
1.71V ≤ VDD_ ≤ 1.89V
11.8
tSCSLH
1.71V ≤ VDD_ ≤ 5.5V
2.0
tSCSHL
1.71V ≤ VDD_ ≤ 5.5V
2.0
4.5V ≤ VDD_ ≤ 5.5V
3.7
3.0V ≤ VDD_ ≤ 3.6V
4.7
2.25V ≤ VDD_ ≤ 2.75V
6.9
1.71V ≤ VDD_ ≤ 1.89V
12.1
4.5V ≤ VDD_ ≤ 5.5V
4.0
3.0V ≤ VDD_ ≤ 3.6V
4.9
2.25V ≤ VDD_ ≤ 2.75V
7.0
tSPHL
tSCOLH
Propagation Delay
Skew Channel-toChannel (Opposite
Direction)
tSCOHL
1.71V ≤ VDD_ ≤ 1.89V
Peak Eye Diagram Jitter
Clock Jitter RMS
Rise Time
(Figure 1)
tJIT(PK)
tJCLK(RMS)
tR
500kHz clock input, rising/falling edges
tF
ns
ps
11.1
ps
4.5V ≤ VDD_ ≤ 5.5V
0.8
3.0V ≤ VDD_ ≤ 3.6V
1.1
1.5
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
ns
2.4
1.0
1.4
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
CL = 5pF
ns
100
2.25V ≤ VDD_ ≤
CL = 5pF
UNITS
11.8
200Mbps
3.0V ≤ VDD_ ≤ 3.6V
Fall Time
(Figure 1)
MAX
3.0V ≤ VDD_ ≤ 3.6V
Propagation Delay
Skew Part-to-Part
(Same Channel)
Propagation Delay
Skew Channel-toChannel (Same
Direction) (Figure 1)
CONDITIONS
1.9
ns
3.0
Dynamic Characteristics - MAX2216_B/E
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB – VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 2, 4)
PARAMETER
Common-Mode
Transient Immunity
SYMBOL
CMTI
Maximum Data Rate
DRMAX
Minimum Pulse Width
PWMIN
Glitch Rejection
www.analog.com
CONDITIONS
MIN
IN_ = GND_ or VDD_ (Note 5)
TYP
MAX
50
kV/µs
25
Mbps
IN_ to OUT_
IN_ to OUT_
19-101240; Rev 6; 11/23
10
UNITS
17
40
ns
29
ns
Analog Devices | 7
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB – VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 2, 4)
PARAMETER
SYMBOL
tPLH
CONDITIONS
IN_ to OUT_,
CL = 15pF
Propagation Delay
(Figure 1)
MIN
TYP
MAX
4.5V ≤ VDD_ ≤ 5.5V
16.7
22.6
30.7
3.0V ≤ VDD_ ≤ 3.6V
17.0
23.4
32.2
17.7
24.8
35.3
19.6
28.8
42.8
16.4
22.7
32.1
16.8
23.5
33.8
17.3
24.8
36.7
19.0
28.4
43.7
0.2
4.0
0.2
4.0
0.3
4.0
0.6
4.0
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
3.0V ≤ VDD_ ≤ 3.6V
tPHL
IN_ to OUT_,
CL = 15pF
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
3.0V ≤ VDD_ ≤ 3.6V
Pulse Width Distortion
PWD
|tPLH - tPHL|
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
14.0
3.0V ≤ VDD_ ≤ 3.6V
13.8
2.25V ≤ VDD_ ≤ 2.75V
15.2
1.71V ≤ VDD_ ≤ 1.89V
21.9
4.5V ≤ VDD_ ≤ 5.5V
13.0
3.0V ≤ VDD_ ≤ 3.6V
13.5
2.25V ≤ VDD_ ≤ 2.75V
15.4
1.71V ≤ VDD_ ≤ 1.89V
21.4
tSCSLH
1.71V ≤ VDD_ ≤ 5.5V
4.0
tSCSHL
1.71V ≤ VDD_ ≤ 5.5V
4.0
4.5V ≤ VDD_ ≤ 5.5V
14.0
3.0V ≤ VDD_ ≤ 3.6V
13.8
2.25V ≤ VDD_ ≤ 2.75V
15.2
1.71V ≤ VDD_ ≤ 1.89V
21.9
4.5V ≤ VDD_ ≤ 5.5V
13.0
3.0V ≤ VDD_ ≤ 3.6V
13.5
2.25V ≤ VDD_ ≤ 2.75V
15.4
1.71V ≤ VDD_ ≤ 1.89V
21.4
tSPLH
Propagation Delay
Skew Part-to-Part
(Same Channel)
tSPHL
Propagation Delay
Skew Channel-toChannel (Same
Direction) (Figure 1)
tSCOLH
Propagation Delay
Skew Channel-toChannel (Opposite
Direction)
tSCOHL
Peak Eye Diagram Jitter
Rise Time
(Figure 1)
www.analog.com
tJIT(PK)
tR
25Mbps
CL = 5pF
250
ns
ns
ns
ns
ns
ps
4.5V ≤ VDD_ ≤ 5.5V
0.8
3.0V ≤ VDD_ ≤ 3.6V
1.1
2.25V ≤ VDD_ ≤
2.75V
1.5
19-101240; Rev 6; 11/23
UNITS
ns
Analog Devices | 8
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = 1.71V to 5.5V, VDDB - VGNDB = 1.71V to 5.5V, CL = 15pF, TA = -40°C to +125°C, unless otherwise noted. Typical
values are at VDDA - VGNDA = 3.3V, VDDB – VGNDB = 3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.) (Notes 2, 4)
PARAMETER
SYMBOL
CONDITIONS
1.71V ≤ VDD_ ≤
1.89V
4.5V ≤ VDD_ ≤ 5.5V
MIN
TYP
MAX
2.4
1.0
3.0V ≤ VDD_ ≤ 3.6V
Fall Time
(Figure 1)
tF
1.4
2.25V ≤ VDD_ ≤
2.75V
1.71V ≤ VDD_ ≤
1.89V
CL = 5pF
UNITS
ns
1.9
3.0
Note 1: General purpose devices are 100% production tested at TA = +25°C. Specifications over temperature are guaranteed by
design and characterization. Automotive devices are 100% production tested at TA = +25°C and TA = +125°C.
Note 2: Not production tested. Guaranteed by design and characterization.
Note 3: All currents into the device are positive. All currents out of the device are negative. All voltages are referenced to their
respective grounds (GNDA or GNDB), unless otherwise noted.
Note 4: All measurements are taken with VDDA = VDDB, unless otherwise noted.
Note 5: CMTI is the maximum sustainable common-mode voltage slew rate while maintaining the correct output. CMTI applies to
both rising and falling common-mode voltage edges. Tested with the transient generator connected between GNDA and
GNDB (VCM = 1000V).
ESD Protection
PARAMETER
SYMBOL
ESD
CONDITIONS
VALUE
UNITS
Human Body Model, All Pins
±4
kV
IEC 61000-4-2 Contact, GNDB to GNDA
±6
kV
Test Circuit and Timing Diagram
VDDA
IN1, IN2
VDDA
0.1µF
0.1µF
VDDA
VDDB
50%
GNDA
VDDB
50%
tPLH
tPHL
VDDB
MAX2216_
OUT1
0
IN_
TEST
SOURCE
50%
GNDB
OUT_
CL
GNDA
GNDB
50%
tSCSLH
RL
VDDB
OUT2
GNDB
(A)
tSCSHL
90%
50%
50%
10%
tF
tR
(B)
Figure 1. Test Circuit (A) and Timing Diagram (B)
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 9
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Table 1. Insulation Characteristics
PARAMETER
SYMBOL
CONDITIONS
VALUE
UNITS
Partial Discharge Test
Voltage
Maximum Repetitive Peak
Isolation Voltage
Maximum Working Isolation
Voltage
Maximum Transient Isolation
Voltage
Maximum Withstanding
Isolation Voltage
VPR
Method B1 = VIORM x 1.875 (t = 1s, partial discharge < 5pC)
1182
VP
VIORM
(Note 6)
630
VP
VIOWM
Continuous RMS voltage (Note 6)
445
VRMS
VIOTM
t = 1s (Note 6)
4242
VP
fSW = 60Hz, duration = 60s (Notes 6, 7)
3000
VRMS
Maximum Surge Isolation
Voltage
VIOSM
Reinforced Insulation, test method per IEC 60065, VTEST =
1.6 x VIOSM = 10,000VPEAK (Notes 6, 9)
6250
VP
VIO = 500V, TA = 25°C
>1012
VIO = 500V, 100°C ≤ TA ≤ 125°C
>1011
VIO = 500V, TS = 150°C
>109
Isolation Resistance
Barrier Capacitance Side A
to Side B
Minimum Creepage
Distance
Minimum Clearance
Distance
VISO
RIO
CIO
1.5
pF
CPG
4
mm
CLR
4
mm
Distance through insulation
0.021
mm
Material Group II (IEC 60112)
>400
Internal Clearance
Comparative Tracking Index
fSW = 1MHz (Note 8)
Ω
CTI
Climate Category
40/125/21
Pollution Degree
(DIN VDE 0110, Table 1)
2
Note 6: VISO, VIOWM, VIOTM, VIORM, and VIOSM are defined by the IEC 60747-5-5 standard.
Note 7: Product is qualified at VISO for 60s and 100% production tested at 120% of VISO for 1s.
Note 8: Capacitance is measured with all pins on the A and B sides tied together.
Note 9: Devices are immersed in oil during surge characterization.
Safety Regulatory Approvals
UL
The MAX22163−MAX22166 are certified under UL1577. For more details, refer to file E351759.
Rated up to 3000VRMS isolation voltage for single protection.
cUL (Equivalent to CSA notice 5A)
The MAX22163−MAX22166 are certified up to 3000VRMS for single protection. For more details, refer to file E351759.
VDE (Pending)
The MAX22163−MAX22166 are certified to DIN VDE V 0884-11: 2017-1. Reinforced Insulation, Maximum Transient Isolation
Voltage 4242VPK, Maximum Repetitive Peak Isolation Voltage 630VPK.
These couplers are suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by
means of suitable protective circuits.
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 10
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Typical Operating Characteristics
(VDDA - VGNDA = +3.3V, VDDB - VGNDB = +3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.)
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 11
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = +3.3V, VDDB - VGNDB = +3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.)
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 12
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = +3.3V, VDDB - VGNDB = +3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.)
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 13
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
(VDDA - VGNDA = +3.3V, VDDB - VGNDB = +3.3V, VGNDA = VGNDB, TA = +25°C, unless otherwise noted.)
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 14
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Pin Configurations
MAX22163B/C/E/F
VDDA
1
+
MAX22165B/C/E/F
16
VDDB
VDDA
1
+
16
VDDB
IN1 2
15 OUT1
IN1 2
15 OUT1
3
14 OUT2
IN2
3
14 OUT2
IN3 4
13 OUT3
IN3 4
13 OUT3
IN2
OUT4
5
12
IN4
IN4
5
12 OUT4
OUT5
6
11
IN5
IN5
6
11
OUT5
OUT6
7
10
IN6
OUT6
7
10
IN6
GNDA
8
9
GNDB
GNDA
8
9
GNDB
QSOP
QSOP
MAX22164B/C/E/F
VDDA
1
IN1
+
MAX22166B/C/E/F
+
16 VDDB
VDDA
1
2
15 OUT1
IN1
2
15 OUT1
IN2
3
14 OUT2
IN2
3
14 OUT2
IN3
4
13 OUT3
IN3
4
13 OUT3
IN4
5
12 OUT4
IN4
5
12 OUT4
OUT5
6
11
IN5
IN5
6
11 OUT5
OUT6
7
10
IN6
IN6
7
10 OUT6
GNDA
8
9
GNDB
GNDA
8
9
QSOP
www.analog.com
16 VDDB
GNDB
QSOP
19-101240; Rev 6; 11/23
Analog Devices | 15
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Pin Descriptions
PIN
MAX22163 MAX22164 MAX22165 MAX22166
NAME
FUNCTION
Power Supply Input for Side A. Bypass VDDA to GNDA with a
0.1µF ceramic capacitor as close as possible to the pin.
Logic Input 1 on Side A. Corresponds to Logic Output 1 on Side
B.
Logic Input 2 on Side A. Corresponds to Logic Output 2 on Side
B.
Logic Input 3 on Side A. Corresponds to Logic Output 3 on Side
B.
Logic Input 4 on Side A/B. Corresponds to Logic Output 4 on
Side B/A.
Logic Input 5 on Side A/B. Corresponds to Logic Output 5 on
Side B/A.
Logic Input 6 on Side A/B. Corresponds to Logic Output 6 on
Side B/A.
1
1
1
1
VDDA
2
2
2
2
IN1
3
3
3
3
IN2
4
4
4
4
IN3
12
5
5
5
IN4
11
11
6
6
IN5
10
10
10
7
IN6
8
8
8
8
GNDA
Ground Reference for Side A.
9
9
9
9
GNDB
Ground Reference for Side B.
7
7
7
10
OUT6
6
6
11
11
OUT5
5
12
12
12
OUT4
13
13
13
13
OUT3
14
14
14
14
OUT2
15
15
15
15
OUT1
16
16
16
16
VDDB
www.analog.com
Logic Output 6 on Side B/A. OUT6 is the logic output for the IN6
input on Side A/B.
Logic Output 5 on Side B/A. OUT5 is the logic output for the IN5
input on Side A/B.
Logic Output 4 on Side B/A. OUT4 is the logic output for the IN4
input on Side A/B.
Logic Output 3 on Side B. OUT3 is the logic output for the IN3
input on Side A.
Logic Output 2 on Side B. OUT2 is the logic output for the IN2
input on Side A.
Logic Output 1 on Side B. OUT1 is the logic output for the IN1
input on Side A.
Power Supply Input for Side B. Bypass VDDB to GNDB with a
0.1µF ceramic capacitor as close as possible to the pin.
19-101240; Rev 6; 11/23
Analog Devices | 16
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Functional Diagrams
VDDB
VDDA
IN1
OUT1
IN1
OUT1
IN2
OUT2
IN2
OUT2
IN3
OUT3
IN3
OUT3
OUT4
IN4
IN4
OUT4
OUT5
IN5
OUT5
IN5
OUT6
IN6
OUT6
IN6
GNDA
GNDB
GNDA
GNDB
VDDA
www.analog.com
MAX22163
19-101240; Rev 6; 11/23
MAX22164
VDDB
Analog Devices | 17
MAX22163–MAX22166
MAX22165
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
MAX22166
VDDB
VDDA
IN1
OUT1
IN1
OUT1
IN2
OUT2
IN2
OUT2
IN3
OUT3
IN3
OUT3
OUT4
IN4
OUT4
OUT5
IN5
OUT5
OUT6
IN6
IN6
OUT6
GNDA
GNDB
GNDA
GNDB
VDDA
IN4
IN5
www.analog.com
19-101240; Rev 6; 11/23
VDDB
Analog Devices | 18
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Detailed Description
The MAX22163−MAX22166 are a family of six-channel reinforced digital isolators in a 16-QSOP package, with an
isolation rating of 3kVRMS. This family of devices offers all possible unidirectional channel configurations to accommodate
any six-channel design.
The MAX22163 features three channels transmitting digital signals in one direction and three channels transmitting in the
opposite direction for applications such as isolated microcontroller interfaces. The MAX22164 offers four channels
transmitting digital signals in one direction and two channels transmitting in the opposite direction, making them ideal for
applications such as isolated SPI. The MAX22165 provides five channels transmitting digital signals in one direction and
one channel transmitting in the opposite direction. The MAX22166 features all six channels transmitting digital signals in
one direction, which are suitable in applications such as isolated digital I/O.
The MAX22163−MAX22166 are available in a 16-pin QSOP package with 4mm creepage and clearance, with an isolation
rating of 3kVRMS. This family of digital isolators offers low-power operation, high electromagnetic interference (EMI)
immunity, and stable temperature performance through Analog Devices’ proprietary process technology. The devices
isolate different ground domains and block high-voltage/high-current transients from sensitive or human interface circuitry.
Devices are available with a maximum data rate of either 25Mbps (B/E version) or 200Mbps (C/F version). The
MAX2216_B/C feature default-high outputs. The MAX2216_E/F feature default-low outputs. The output assumes the
default state when the input is not powered or if the input is open-circuit. The MAX22163-MAX22166 have two supply
inputs (VDDA and VDDB) that independently set the logic levels on either side of the device. VDDA and VDDB are
referenced to GNDA and GNDB, respectively. The MAX22163−MAX22166 also feature a refresh circuit to ensure output
accuracy when an input remains in the same state indefinitely.
Digital Isolation
The family of devices provides reinforced galvanic isolation for digital signals transmitted between two ground domains.
The MAX22163−MAX22166 can withstand differences of up to 3kVRMS for up to 60 seconds, and up to 630VPEAK of
continuous isolation.
AEC-Q100 Qualification
Devices with /V suffix are AEC-Q100 qualified. See the Ordering Information table for all automotive grade part numbers.
Level Shifting
The wide supply voltage range of both VDDA and VDDB allows the MAX22163−MAX22166 to be used for level translation
in addition to isolation. VDDA and VDDB can be independently set to any voltage from 1.71V to 5.5V. The supply voltage
sets the logic level on the corresponding side of the isolator.
Unidirectional Channels
Each channel of the device is unidirectional; it only passes data in one direction, as indicated in the Functional Diagrams.
All devices feature six unidirectional channels that operate independently with guaranteed data rates from DC to 25Mbps
(B/E version), or from DC to 200Mbps (C/F version). The output driver of each channel is push-pull, eliminating the need
for pullup resistors. The outputs are able to drive both TTL and CMOS logic inputs.
Startup and Undervoltage Lockout
The VDDA and VDDB supplies are both internally monitored for undervoltage conditions. Undervoltage events can occur
during power-up, power-down, or normal operation due to a sagging supply voltage. When an undervoltage condition is
detected on either supply, all outputs go to their default states regardless of the state of the inputs, as seen in Table 2.
Figure 2 through Figure 5 show the behavior of the outputs during power-up and power-down.
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 19
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Table 2. Output Behavior During Undervoltage Conditions
VIN_
VDDA
VDDB
VOUTA
VOUTB
1
Powered
Powered
High
High
0
Powered
Powered
Low
Low
X
Undervoltage
Powered
Default
Default
X
Powered
Undervoltage
Default
Default
Note: ‘X’ is don’t care.
Figure 2. Undervoltage Lockout Behavior, MAX2216_B/C, Inputs
Set to High
Figure 3. Undervoltage Lockout Behavior, MAX2216_E/F, Inputs
Set to High
Figure 4. Undervoltage Lockout Behavior, MAX2216_B/C, Inputs
Set to Low
Figure 5. Undervoltage Lockout Behavior, MAX2216_E/F, Inputs
Set to Low
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 20
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Safety Limit
Damage to the IC can result in a low-resistance path to ground or to the supply and, without current limiting, the
MAX22163−MAX22166 can dissipate excessive amounts of power. Excessive power dissipation can damage the die and
thus the isolation barrier, potentially causing downstream issues. Table 3 shows the safety limits for the
MAX22163−MAX22166.
The maximum safety temperature (TS) for the device is the 150°C maximum junction temperature specified in the
Absolute Maximum Ratings. The power dissipation (PD) and junction-to-ambient thermal impedance (θJA) determine the
junction temperature. Thermal impedance values (θJA and θJC) are available in the Package Information section and
power dissipation calculations are discussed in the Calculating Power Dissipation section. Calculate the junction
temperature (TJ) as:
TJ = TA + (PD x θJA)
Figure 6 shows the thermal derating curve for safety limiting the power of the devices, and Figure 7 shows the thermal
derating curve for safety limiting the current of the devices. Ensure the junction temperature does not exceed 150°C.
Figure 6. Thermal Derating Curve for Safety Power Limiting
Figure 7. Thermal Derating Curve for Safety Current Limiting
Table 3. Safety Limiting Values
PARAMETER
SYMBOL
Safety Current on Any Pin
(No Damage to Isolation Barrier)
IS
Total Safety Power Dissipation
PS
Maximum Safety Temperature
TS
www.analog.com
TEST CONDITIONS
MAX
UNIT
TJ = 150°C, TA = 25°C
300
mA
TJ = 150°C, TA = 25°C
1123
mW
150
°C
19-101240; Rev 6; 11/23
Analog Devices | 21
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Applications Information
Power-Supply Sequencing
The MAX22163−MAX22166 do not require any special power supply sequencing. The logic levels are set independently
on either side by VDDA and VDDB. Each supply can be present over the entire specified range regardless of the level or
presence of the other supply.
Power-Supply Decoupling
To reduce ripple and the chance of introducing data errors, bypass VDDA and VDDB with 0.1μF low-ESR ceramic
capacitors to GNDA and GNDB, respectively. Place the bypass capacitors as close to the power supply input pins as
possible.
Layout Considerations
The PCB designer should follow some critical recommendations to get the best performance from the design.
•
•
•
Keep the input/output traces as short as possible. To keep signal paths low-inductance, avoid using vias.
Have a solid ground plane underneath the high-speed signal layer.
Keep the area underneath the devices free from ground and signal planes. Any galvanic or metallic connection
between Side A and Side B defeats the isolation.
Calculating Power Dissipation
The required current for a given supply (VDDA or VDDB) can be estimated by summing the current required for each
channel. The supply current for a channel depends on if the channel is an input or an output, the channel’s data rate, and
the capacitive or resistive load if it is an output. The typical current for an input or output at any data rate can be estimated
from the graphs in Figure 8 and Figure 9. Note that the data in Figure 8 and Figure 9 are extrapolated from the supply
current measurements in a typical operating condition.
The total current for a single channel is the sum of the no load current (shown in Figure 8 and Figure 9), which is a function
of voltage and data rate, and the load current, which depends on the type of load. Current into a capacitive load is a
function of the load capacitance, switching frequency, and supply voltage.
ICL = CL × fSW × VDD
where:
ICL is the current required to drive the capacitive load.
CL is the load capacitance on the isolator’s output pin.
fSW is the switching frequency (bits per second/2).
VDD is the supply voltage on the output side of the isolator.
Current into a resistive load depends on the load resistance, supply voltage, and average duty cycle of the data waveform.
The DC load current can be conservatively estimated by assuming the output is always high.
IRL = VDD ÷ RL
where:
IRL is the current required to drive the resistive load.
VDD is the supply voltage on the output side of the isolator.
RL is the load resistance on the isolator’s output pin.
Example (shown in Figure 10): A MAX22164C is operating with VDDA = 2.5V, VDDB = 3.3V, channel 1 operating at
20Mbps with a 15kΩ resistive load; channel 2 operating at 100Mbps with a 10pF capacitive load; channel 3 is not in use
and the resistive load is negligible as the isolator is driving a CMOS input; channel 4 held high with a 10kΩ resistive load;
channel 5 operating at 50Mbps with a 20kΩ resistive load; and channel 6 operating at 200Mbps with a 15pF capacitive
load. See Table 4 and Table 5 for VDDA and VDDB supply current calculation worksheets.
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 22
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
VDDA must supply (with VDDA = 2.5V):
• Channel 1 is an input channel operating at 2.5V and 20Mbps, consuming 0.35mA, estimated from Figure 8.
• Channel 2 is an input channel operating at 2.5V and 100Mbps, consuming 1.19mA, estimated from Figure 8.
• Channels 3 and 4 are input channels operating at 2.5V with DC signal, consuming 0.14mA, estimated from Figure 8.
• Channel 5 is an output channel operating at 2.5V and 50Mbps, consuming 0.52mA, estimated from Figure 9.
• IRL on channel 5 for 20kΩ resistive load at 2.5V and switching at 50Mbps with 50% duty cycle is 0.0625mA.
• Channel 6 is an output channel operating at 2.5V and 200Mbps, consuming 1.31mA, estimated from Figure 9.
• ICL on channel 6 for 15pF capacitive load at 2.5V and 200Mbps is 3.75mA.
Total current for Side A = 7.46mA (typ).
VDDB must supply (with VDDB = 3.3V):
•
•
•
•
•
Channel 1 is an output channel operating at 3.3V and 20Mbps, consuming 0.40mA, estimated from Figure 9.
IRL on channel 1 for 15kΩ resistive load at 3.3V and switching at 20Mbps with 50% duty cycle is 0.11mA.
Channel 2 is an output channel operating at 3.3V and 100Mbps, consuming 0.96mA, estimated from Figure 9.
ICL on channel 2 for 10pF capacitive load at 3.3V and 100Mbps is 1.65mA.
Channels 3 and 4 are output channels operating at 3.3V with DC signal, consuming 0.26mA, estimated from Figure
9.
• IRL on channel 4 for 10kΩ resistive load held at 3.3V is 0.33mA.
• Channel 5 is an input channel operating at 3.3V and 50Mbps, consuming 0.68mA, estimated from Figure 8.
• Channel 6 is an input channel operating at 3.3V and 200Mbps, consuming 2.29mA, estimated from Figure 8.
Total current for Side B = 6.94mA (typ).
Figure 8. Supply Current Per Input Channel (Calculated)
www.analog.com
Figure 9. Supply Current Per Output Channel (Calculated)
19-101240; Rev 6; 11/23
Analog Devices | 23
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
2.5V
3.3V
0.1μ F
VDDA
MAX22164C
OUT1
IN1
20Mbps
0.1μ F
VDDB
20Mbps
15k
IN2
10 0Mbp s
OUT2
100Mbps
10pF
2.5V
IN3
OUT3
IN4
OUT4
10k
OUT5
50Mbps
IN5
50Mbps
20k
20 0Mbp s
OUT6
IN6
GNDA
GNDB
200Mbps
15pF
Figure 10. Example Circuit for Supply Current Calculation
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 24
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Table 4. Side A Supply Current Calculation Worksheet
SIDE A
VDDA = 2.5V
CHANNEL
IN/OUT
DATA RATE
(Mbps)
1
IN
20
0.35
2
IN
100
1.19
3
IN
0
0.14
LOAD TYPE
“NO LOAD”
CURRENT (mA)
LOAD
LOAD CURRENT (mA)
4
IN
0
5
OUT
50
Resistive
20kΩ
0.14
0.52
2.5V / 20kΩ x 0.5 = 0.0625mA
6
OUT
200
Capacitive
15pF
1.31
2.5V x 100MHz x 15pF = 3.75mA
Total: 7.46mA
Table 5. Side B Supply Current Calculation Worksheet
SIDE B
VDDB = 3.3V
CHANNEL
IN/OUT
DATA RATE
(Mbps)
LOAD TYPE
LOAD
“NO LOAD”
CURRENT (mA)
LOAD CURRENT (mA)
1
OUT
20
Resistive
15kΩ
0.40
3.3V / 15kΩ x 0.5 = 0.11mA
2
OUT
100
Capacitive
10pF
0.96
3.3V x 50MHz x 10pF = 1.65mA
3
OUT
0
4
OUT
0
5
IN
50
0.68
6
IN
200
2.29
0.26
Resistive
10kΩ
0.26
3.3V / 10kΩ = 0.33mA
Total: 6.94mA
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 25
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Typical Application Circuits
24V
5V
3.3V
1µF
0.1µF
0.1µF
VDDA
MAX22164B
1µF
1µF
VDDB
VL
EN V5
VLED
VDD
CRCEN
VDD
GPO
IN1
24V
VDD4
VDD3
OUT1
SYNCH
1µF
VDD2
VDD1
CS
IN2
OUT2
CS
G4
DOI4
DOI4
DOI4
SCLK
IN3
OUT3
CLK
G3
MICRO
CONTROLLER
DOI3
MAX14906
MOSI
INT
IN4
OUT4
OUT5
IN5
OUT6
IN6
DOI3
DOI3
SDI
G2
DOI2
DOI2
FAULT
DOI2
G1
MISO
DOI1
DOI1
SDO
A0
READY
D1, D2, D3, D4
GNDA
GNDB
GND
www.analog.com
19-101240; Rev 6; 11/23
10k
GND
DOI1
A1
PGND
EP
Analog Devices | 26
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Product Selector Guide
MAX2216
6 C A
E
E /V +
CHANNEL
CONFIGURATION
6: 6/0
5: 5/1
4: 4/2
3: 3/3
LEAD-FREE/ ROHS COMPLIANT
/V: A UTOMOTIVE GRADE PART
BLANK: GENERAL PURPOSE PART
PINS
E: 1 6
MAX IMUM DATA RATE
DEVICE
CONFIGURATION
25Mbps
200Mbps
DEFAULT-HIGH OUTP UT
B
C
DEFAULT-LOW OUTPUT
E
F
PACKAGE TYPE
E: QSOP
TEMP RANGE
-40 °C TO +12 5°C
Ordering Information
PART NUMBER
CHANNEL
CONFIGURATION
DATA RATE
(Mbps)
DEFAULT
OUTPUT
ISOLATION
VOLTAGE (kVRMS)
TEMPERATURE
RANGE (°C)
PINPACKAGE
GENERAL PURPOSE DEVICES
MAX22163BAEE+*
3/3
25
High
3
-40 to +125
16-QSOP
MAX22163CAEE+
3/3
200
High
3
-40 to +125
16-QSOP
MAX22163EAEE+*
3/3
25
Low
3
-40 to +125
16-QSOP
MAX22163FAEE+
3/3
200
Low
3
-40 to +125
16-QSOP
MAX22164BAEE+*
4/2
25
High
3
-40 to +125
16-QSOP
MAX22164CAEE+
4/2
200
High
3
-40 to +125
16-QSOP
MAX22164EAEE+
4/2
25
Low
3
-40 to +125
16-QSOP
MAX22164FAEE+
4/2
200
Low
3
-40 to +125
16-QSOP
MAX22165BAEE+*
5/1
25
High
3
-40 to +125
16-QSOP
MAX22165CAEE+
5/1
200
High
3
-40 to +125
16-QSOP
MAX22165EAEE+*
5/1
25
Low
3
-40 to +125
16-QSOP
MAX22165FAEE+
5/1
200
Low
3
-40 to +125
16-QSOP
MAX22166BAEE+*
6/0
25
High
3
-40 to +125
16-QSOP
MAX22166CAEE+
6/0
200
High
3
-40 to +125
16-QSOP
MAX22166EAEE+*
6/0
25
Low
3
-40 to +125
16-QSOP
MAX22166FAEE+
6/0
200
Low
3
-40 to +125
16-QSOP
MAX22163BAEE/V+*
3/3
25
High
3
-40 to +125
16-QSOP
MAX22163CAEE/V+*
3/3
200
High
3
-40 to +125
16-QSOP
MAX22163EAEE/V+*
3/3
25
Low
3
-40 to +125
16-QSOP
MAX22163FAEE/V+
3/3
200
Low
3
-40 to +125
16-QSOP
AUTOMOTIVE DEVICES
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 27
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
MAX22164BAEE/V+*
4/2
25
High
3
-40 to +125
16-QSOP
MAX22164CAEE/V+*
4/2
200
High
3
-40 to +125
16-QSOP
MAX22164EAEE/V+*
4/2
25
Low
3
-40 to +125
16-QSOP
MAX22164FAEE/V+*
4/2
200
Low
3
-40 to +125
16-QSOP
MAX22165BAEE/V+*
5/1
25
High
3
-40 to +125
16-QSOP
MAX22165CAEE/V+*
5/1
200
High
3
-40 to +125
16-QSOP
MAX22165EAEE/V+*
5/1
25
Low
3
-40 to +125
16-QSOP
MAX22165FAEE/V+*
5/1
200
Low
3
-40 to +125
16-QSOP
MAX22166BAEE/V+*
6/0
25
High
3
-40 to +125
16-QSOP
MAX22166CAEE/V+*
6/0
200
High
3
-40 to +125
16-QSOP
MAX22166EAEE/V+*
6/0
25
Low
3
-40 to +125
16-QSOP
MAX22166FAEE/V+*
6/0
200
Low
3
-40 to +125
16-QSOP
*Future product − contact Analog Devices for availability.
+Denotes a lead (Pb)–free/RoHS-compliant package.
/V Denotes an automotive qualified part.
Chip Information
PROCESS: BiCMOS
www.analog.com
19-101240; Rev 6; 11/23
Analog Devices | 28
MAX22163–MAX22166
Reinforced, Fast, Low-Power, Six-Channel
Digital Isolators
Revision History
REVISION
NUMBER
0
REVISION
DATE
10/21
1
8/22
2
10/22
3
11/22
4
01/23
5
06/23
6
11/23
DESCRIPTION
Initial Release
Removed future product designation from MAX22164EAEE+ in the Ordering Information
section
Removed future product designation from MAX22163FAEE+ in the Ordering Information
section
Removed future product designation from MAX22164CAEE+ in the Ordering Information
section
Removed future product designation from MAX22164FAEE+ and MAX22165FAEE+ in
the Ordering Information section
Removed future product designation from MAX22163FAEE/V+ in the Ordering
Information section
Removed future product designation from MAX22163CAEE+, MAX22165CAEE+,
MAX22166FAEE+ in the Ordering Information section
PAGES
CHANGED
—
26
26
26
26
26
26
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is
assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may
result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their
respective owners.
w w w . a n a l o g . c o m
Analog Devices | 29
工商网监
湘ICP备2023018690号
