ATM15-08PB-BM03

REVISIONS 52.6 41.1 2x Ø3.10 x 10.2 DP REV ECO DESCRIPTION A1 - RELEASE NEW DRAWING 15JUN18 DATE A2 - REVISED DRAWING 10JUL20 BY APPR SULLEN TOMMY JHEAD DH 30.2 31.8 17.3 PIN #1 RESERVOIR TITLE: RECOMMENDED SCREW: 6-19 [M3.63 x 1.34] THREAD-FORMING SCREW, TORQUE: 10-20 IN-LB [1.13-2.25 NM] 20.3 21.9 7.1 PCB MOUNT RECEPTACLE, 8PIN, STRAIGHT FLANGE, ATM SERIES 33.1 2x R7.6 FLANGE SEAL 3X KEYWAY 6 3.05±0.4 4.2 12.6 4x Ø2.79 x 13.25 DP 26.4 RECOMMENDED SCREW: 4-20 [M3.12 x 1.27] THREAD-FORMING SCREW, TORQUE: 6-10 IN-LB [0.68-1.13 NM] 26.42±0.1 6.91±0.1 DWG NO: 7.40±0.1 8x Ø1.0±0.12 21.90±0.1 Ø1.20+0.2 (8x) 0 4.20±0.05 Ø3.43 (4x) NOTES: UNLESS OTHERWISE SPECIFIED REV: 12.60±0.10 A2 1. MATERIAL: HOUSING: THERMOPLASTIC, GREY SEAL: SILICONE RUBBER CONTACT: COPPER ALLOY RECOMMENDED PCB LAYOUT All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = 6. SEE SHEET 2 FOR OTHER KEY ARRANGEMENTS AND COLORS X SIGNATURES DRAWN: CHECKED: APPROVAL: CUSTOMER: 7. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY PROCESS SPECIFICATIONS: Amphenol DATE SULLEN.ZHANG 15JUN18 15JUN18 ORION.LI Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: MATERIAL SPECIFICATIONS: TOMMY.XIE 15JUN18 BOARDLOCK PCB MOUNT RECEPTACLE, 8 PIN, STRAIGHT FLANGE, ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 6. POTTED CONNECTORS SPECIFIED FOR UP TO 5 P.S.I. APPLICATIONS. NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATM15-08PX-BMXX A2 SHEET 1 OF 2 2 UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 OF: ATM15-08PX-BMXX PART NUMBER DESCRIPTION MATERIALS LIST QUANTITY 5. MATING PART: ATM06-08SX-* ( X = A,B,C,D KEYS ; * = MODIFICATIONS AND COLORS) 1 3. MODIFICATIONS: FLANGE; STRAIGHT PCB MOUNT SH: VIEW FROM COMPONENTS SIDE OF PCB 2. CONTACT PLATING: SEE SHEET 2 4. SPECIFICATIONS: 4.1 CURRENT RATING: 7.5 AMPS 4.2 OPERATING TEMPERATURE: -55°C TO +125°C 4.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 4.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 4.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 4.6 MATING CYCLE DURABILITY: 100 CYCLES 4.7 RoHS COMPLIANT ATM15-08PX-BMXX 7.10±0.1 REVISIONS 3X KEYWAY SLEEVE RETAINER: BLACK 3X KEYWAY SLEEVE RETAINER: GREY REV ECO DESCRIPTION A1 - RELEASE NEW DRAWING 15JUN18 A2 - REVISED DRAWING 10JUL20 3X KEYWAY SLEEVE RETAINER: GREEN DATE BY APPR SULLEN TOMMY JHEAD DH 3X KEYWAY SLEEVE RETAINER: BROWN TITLE: ATM15-08PB-BMXX KEY B ATM15-08PA-BMXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR ATM15-08PC-BMXX KEY C ATM15-08PB-BMXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR PART NUMBER PART NUMBER ATM15-08PD-BMXX KEY D ATM15-08PC-BMXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR PCB MOUNT RECEPTACLE, 8PIN, STRAIGHT FLANGE, ATM SERIES ATM15-08PA-BMXX KEY A ATM15-08PD-BMXX VARIANTS CONTACT POTTING OR NOT PLATING IN RESERVOIR PART NUMBER PART NUMBER ATM15-08PA-BM01 GOLD NO POTTING ATM15-08PB-BM01 GOLD NO POTTING ATM15-08PC-BM01 GOLD NO POTTING ATM15-08PD-BM01 POTTING ATM15-08PA-BM02 GOLD POTTING ATM15-08PB-BM02 GOLD POTTING ATM15-08PC-BM02 GOLD POTTING ATM15-08PD-BM02 TIN NO POTTING ATM15-08PA-BM03 TIN NO POTTING ATM15-08PB-BM03 TIN NO POTTING ATM15-08PC-BM03 TIN NO POTTING ATM15-08PD-BM03 TIN POTTING ATM15-08PA-BM04 TIN POTTING ATM15-08PB-BM04 TIN POTTING ATM15-08PC-BM04 TIN POTTING ATM15-08PD-BM04 ATM15-08PX-BMXX NO POTTING GOLD DWG NO: GOLD 52.56 MIN. 41.13±0.10 33.08 REV: 4x R7.60 MIN. A2 24.62 SH: 2x Ø4.06 2 QUANTITY UNLESS OTHERWISE SPECIFIED 1) 2) 1 2 3 All dimensions are in metric(mm). Tolerances are as follows: PL DEC ±0.30 Fractions ±1/64 PL DEC ±0.15 Angles ±1° PL DEC ±0.08 3) Note reference = INTERNAL SEALING SURFACE FINISH TO BE 3.2 OR BETTER 12x R1.00 X SIGNATURES DRAWN: CHECKED: MATERIAL SPECIFICATIONS: CUSTOMER: 0.13 RECOMMENDED PANEL CUTOUT PROCESS SPECIFICATIONS: Amphenol DATE SULLEN.ZHANG 15JUN18 ORION.LI 15JUN18 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: TOMMY.XIE 15JUN18 BOARDLOCK PCB MOUNT RECEPTACLE, 8 PIN, STRAIGHT FLANGE, ATM SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: ITEM NONE DWG NO: REVISION ATM15-08PX-BMXX A2 SHEET 2 OF 2 2 16.00 21.49 OF: 33.10 MIN. 16.00 ATM15-08PX-BMXX DESCRIPTION PART NUMBER MATERIALS LIST