PI7C9X2G606PRDNJAE

Pb A product Line of Diodes Incorporated Lead-free Green PRODUCT BRIEF PI7C9X2G606PR PCIe 2 6-Port/6-Lane Packet Switch, GreenPacket Family Features Description ÎÎPCISIG PCI Express 2.1 certificated ÎÎReliability, Availability and Serviceability ßß Supports Data Poisoning and End-to-End CRC ßß Advanced Error Reporting and Logging ÎÎDevice State Power Management ßß Supports D0, D3Hot and D3Cold device power states ÎÎAdvanced Power Savings ßß Empty downstream ports are set to idle ÎÎProgrammable driver current and de-emphasis level at each The PI7C9X2G606PR is a 6-lane PCI Express Gen 2 Switch with 6 PCI Express ports specifically designed to meet high performance and the latest GREEN low-power, lead (Pb)-free system requirements, such as Network, Embedded, Storage and other platforms. The name of the family, GreenPacket, refers to Diodes proprietary power saving technology. individual port ÎÎPort Arbitration: Round Robin (RR), Weighted RR and Time- based Weighted RR ÎÎExtended Virtual Channel capability ßß Two Virtual Channels (VC) and Eight Traffic Class (TC) support ßß Independent TC/VC mapping for each port ÎÎSupports Isochronous Traffic ßß Isochronous traffic class mapped to VC1 only ÎÎSupports “Cut-through”(Default) as well as “Store and Forward” mode for switching packets ÎÎStrapped pins configurable with optional EEPROM or SMBus ÎÎPeer-to-peer switching between any two downstream ports ÎÎSupports up to 512-byte maximum payload size ÎÎPower Dissipation: 0.6 W typical in L0 normal mode ÎÎIndustrial Temperature Range: -40o to 85oC ÎÎMTBF: 50,927,360 hours ÎÎTotally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) ÎÎHalogen and Antimony Free. “Green” Device (Note 3) ÎÎFor automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ ÎÎPackaging (Pb-free & Green): ßß 196-pin LBGA 15mm x 15mm The PI7C9X2G606PR provides one upstream port supporting x1, and 5 downstream ports that support x1 operation. The flexible upstream port provides users the flexibility to expand or fan-out from a wide range of x86, ARM, MIPS, PowerPC SoC/ Chipset, and it is a suitable solution for wired/ wireless Networking, Switch router, Embedded, Storage, HBA, Surveillance, Combo card and other applications. Enhanced Features ÎÎ150ns typical latency for packet running through switch without blocking ÎÎLink Power Management ßßSupports L0, L0s, L1, L2, L2/L3Ready and L3 link power states ßßActive state power management for L0s and L1 states ßßSupports PCI-PM and ASPM of L1.1 PM Sub-state ÎÎSupports Device Specific PME Turn-Off Message for each downstream port ÎÎSupport Access Control Service (ACS) for peer-to-peer traffic ÎÎSupport Address Translation (AT) packet for SR-IOV application ÎÎSupport OBFF and LTR ÎÎSupport Serial Hot Plug Controller Application Example Chipset/ SoC x1 PCIe 2 PI7C9X2G606PR Applications x1 PCIe 2 ÎÎWireless AP/ Switch Router ÎÎWired/ Wireless Tele/ data communication ÎÎEmbedded system ÎÎIPC/ Industrial control ÎÎAutomotive ÎÎNAS/ Storage ÎÎServer ÎÎPrinter/ MFP/ Peripheral ÎÎSurveillance/ Security ÎÎHBA / Combo cards ÎÎSet-top box and consumer devices ÎÎNB/ PC Motherboard PCIe slot expansion PCIe EP Part Number Package PI7C9X2G606PRENJAEX NJA PI7C9X2G606PREEVB ÎÎPCI Express® Base Specification, Revision 2.1 ÎÎPCI Express CEM Specification, Revision 2.0 ÎÎPCI-to-PCI Bridge Architecture Spec., Rev 1.2 ÎÎAdvanced Configuration Power Interface (ACPI) Specification ÎÎSMBus interface support October 2019 PCIe EP PCIe EP PCIe EP Ordering Information Industry Specifications Compliance Rev 5 PCIe EP Board Description 196-Ball, Low Profile BGA (0.6mm Ball) Evaluation kit for PI7C9X2G606PRE Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, “Green” and Lead-free. 3. Halogen- and Antimony-free “Green” products are defined as those which contain