SLIN-12F1A0

NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. RoHS Compliant • • • • • SLIN-12F1Ax Features • • • • • • • • • • Rev.A Wide Input Voltage Range Output Voltage Programmable Fixed Switching Frequency Remote On/Off Remote Sense TM Over Temperature Protection Output Over Current Protection Ability to Sink and Source Current Cost Efficient Open Frame Design Flexible Output Voltage Sequencing Tunable Loop (a registered trademark of Lineage Power Systems) to Optimize Dynamic output voltage response Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592) Compliant to RoHS EU Directive 2002/95/EC UL* 60950-1 Recognized, CSA† C22.2 No. 60950-1-03 Certified VDE‡ 0805:2001-12 (EN60950-1) Licensed Applications • • • Distributed power architectures Intermediate bus voltage applications Telecommunications equipment • • • Servers and storage applications Networking equipment Industrial equipment Description The SLIN-12F1Ax series of power modules are non-isolated dc/dc converters that can deliver up to 12A of output current. These modules operate over a wide range of input voltage (VIN = 2.4Vdc-5.5Vdc) and provide a precisely regulated output voltage from 0.6Vdc to 3.63Vdc, programmable via an external resistor. Features include remote On/Off, adjustable output voltage, over current protection, and over temperature protection. A new feature, the Tunable LoopTM, allows the user to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area. Part Selection Output Voltage 0.6 Vdc - 3.63 Vdc Input Voltage 2.4 Vdc - 5.5 Vdc Max. Output Current 12 A Typical Efficiency 92.7% Model Number Active High SLIN-12F1A0 Model Number Active Low SLIN-12F1AL Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging. Part Number Explanation S LIN – 12 F 1A 0 1 2 34 5 6 4--- Wide input voltage range (2.4-5.5V) 5--- Wide output voltage range (0.6-3.63V) 6--- Enable, active high, change “0” to “L” means active low 1---Surface mount 2---Series code 3---Output current (12A) Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 1 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Min -0.3 -0.3 -40 -55 Typ Max 6 VIN,max 85 125 Unit V V °C °C Notes Absolute Maximum Ratings Parameter Continuous Input Voltage Sequencing Voltage Operating Ambient Temperature Storage Temperature Note: Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Input Specifications Parameter Operating Input Voltage Input Current (full load) Input Current (no load) Input Stand-by Current Input Reflected Ripple Current (pk-pk) I2t Inrush Current Transient Input Ripple Rejection (120Hz) Turn-on Threshold Turn-off Threshold Hysteresis Min 2.4 1.75 0.08 Typ 36 81 3 49 -30 Max 5.5 11 1 2.2 0.2 Unit V A mA mA mA mA A2s dB V V V Notes VIN=2.4V to 5.5V, IO=IO, max VIN=5.0V, Vo=0.6V, IO=0, module enabled VIN=5.0V, Vo=3.3V, IO=0, module enabled VIN = 5V, module disabled 5Hz to 20MHz, 1μH source impedance; VIN =0 to 5.5V, IO= IOmax CAUTION: This converter is not internally fused. An input line fuse must be used in application. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 15A. Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information. Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 2 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Output Specifications Parameter Output Voltage Set Point Output Voltage Adjustment Range Remote Sense Range Output Regulation (for VO ≥ 2.5Vdc) Output Regulation (for VO < 2.5Vdc) Min -1.5 -3.0 0.6 Ripple and Noise (pk-pk) Ripple and Noise (rms) Output Current Range Output DC Current Limit Output Short-Circuit Current Output Capacitance ESR≥ 1 mΩ ESR≥0.15 mΩ ESR≥ 10 mΩ 0 0 0 0 Turn-On Delay Time 2 mS Typ 25 10 30 2 Max +1.5 +3.0 3.63 0.5 0.4 10 10 5 0.4 35 15 12 200 200 1000 5000 Unit %Vo,set %Vo,set V V %Vo,set mV mV mV %Vo,set mV mV A %Io,max %Io,max uF uF uF mS Hiccup Mode Vo≤250mV, Hiccup Mode Without the Tunable LoopTM With the Tunable LoopTM With the Tunable LoopTM Case 1: On/Off input is enabled and then input power is applied (delay from instant at which VIN = VIN, min until Vo =10% of Vo, set) Case 2: Input power is applied for at least one second and then the On/Off input is enabled (delay from instant at which Von/Off is enabled until Vo =10% of Vo, set) time for Vo to rise from 10% of Vo, set to 90% of Vo, set Vin=Vin, min to Vin, max, Io=Io, max, With or without maximum external capacitance Line Regulation, VIN=VIN, min to VIN, max Load Regulation, IO=IO, min to IO, max Line Regulation, VIN=VIN, min to VIN, max Load Regulation, IO=IO, min to IO, max Temperature Regulation, Tref=TA, min to TA, max 5Hz to 20MHz BW, VIN=VIN, nom and IO=IO, min to IO, max, Co = 0.1μF // 10 μF ceramic capacitors Notes with 0.5% tolerance for external resistor used to set output voltage Over all operating input voltage, resistive load, and temperature conditions until end of life selected by an external resistor Output voltage Rise time Output voltage overshoot - 5 - 3 mS %Vo Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 3 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. General Specifications Parameter Efficiency Vo=0.6V Vo=1.2V Vo=1.8V Vo=2.5V Vo=3.3V Switching Frequency Over Temperature Protection Sequencing Delay time Tracking Accuracy Power-Up: 2V/ms Power-Down: 2V/ms Weight 10 75.0 85.5 89.9 92.7 94.6 600 130 % % % % % kHz °C mS Delay from VIN, min to application of voltage on SEQ pin VIN, min to VIN, max; IO, min - IO, max VSEQ < Vo Vin= 3.3Vdc, Ta=25°C Io=Io, max , Vo= Vo,set Vin=5.0V, when Vo=3.3V Min Typ Max Unit Notes - 3.59 100 100 - mV mV g MTBF Dimensions Inches (L × W × H) Millimeters (L × W × H) 28,160,677 hours Calculated MTBF (IO=IO, max, TA=25°C) Telecordia Issue 2, Method 1 Case 3 0.80 x 0.45 x 0.334 20.32 x 11.43 x 8.50 - Note: Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 4 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Efficiency Data 90 95 85 90 EFFICIENCY, η (%) EFFICIENCY, η (%) 85 Vin=2.4V 80 Vin=3.3V Vin=5.5V 80 Vin=2.4V 75 Vin=3.3V Vin=5.5V 70 0 2 4 6 8 10 12 75 70 0 2 4 6 8 10 12 OUTPUT CURRENT, IO (A) OUTPUT CURRENT, IO (A) Vo=0.6V 100 95 95 100 Vo=1.2V EFFICIENCY, η (%)) 90 85 80 75 70 0 2 4 6 8 10 12 Vin=2.4V EFFICIENCY, η (%) Vin=3.3V Vin=5.5V 90 Vin=5.5V Vin=3V Vin=3.3V 85 80 0 2 4 6 8 10 12 OUTPUT CURRENT, IO (A) OUTPUT CURRENT, IO (A) Vo=1.8V 100 Vo=2.5V 95 EFFICIENCY, η (%)) Vin=5.5V 90 Vin=5V Vin=4.5V 85 80 0 2 4 6 8 10 12 OUTPUT CURRENT, IO (A) Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 5 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Thermal Derating Curves 13 13 OUTPUT CURRENT, Io (A) 11 OUTPUT CURRENT, Io (A) 12 12 2m/s (400LFM) 11 10 9 1m/s (200LFM) 0.5m/s (100LFM) NC 2m/s (400LFM) 10 1m/s (200LFM) 0.5m/s (100LFM) NC 9 8 25 35 45 55 65 O 8 25 35 45 55 65 O 75 85 75 85 AMBIENT TEMPERATURE, TA C AMBIENT TEMPERATURE, TA C Vo=0.6V 13 13 Vo=1.2V OUTPUT CURRENT, Io (A) 11 OUTPUT CURRENT, Io (A) 12 12 2m/s (400LFM) 11 10 1m/s (200LFM) 0.5m/s (100LFM) NC 2m/s (400LFM) 10 1m/s (200LFM) 0.5m/s (100LFM) NC 9 9 8 25 35 45 55 65 O 8 25 35 45 55 65 O 75 85 75 85 AMBIENT TEMPERATURE, TA C AMBIENT TEMPERATURE, TA C Vo=1.8V 13 Vo=2.5V OUTPUT CURRENT, Io (A) 12 11 2m/s (400LFM) 10 1m/s (200LFM) 0.5m/s (100LFM) NC 9 8 25 35 45 55 65 O 75 85 AMBIENT TEMPERATURE, TA C Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 6 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Ripple and Noise Waveforms OUTPUT VOLTAGE VO (V) (10mV/div) TIME, t (1μs/div) OUTPUT VOLTAGE VO (V) (10mV/div) TIME, t (1μs/div) Vin=5V, Vo=0.6V, Io = Io,max Vin=5V, Vo=1.2V, Io = Io,max OUTPUT VOLTAGE VO (V) (10mV/div) TIME, t (1μs/div) OUTPUT VOLTAGE VO (V) (10mV/div) TIME, t (1μs/div) Vin=5V, Vo=1.8V, Io = Io,max Vin=5V, Vo=2.5V, Io = Io,max OUTPUT VOLTAGE VO (V) (10mV/div) TIME, t (1μs/div) Vin=5V, Vo=3.3V, Io = Io,max Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 7 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 . Bel Power Inc., a subsidiary of Bel Fuse Inc. Transient Response Waveforms OUTPUT VOLTAGE VO (V) (200mV/div) OUTPUT CURRENT, IO (A) (5A/div) TIME, t (20μs /div) OUTPUT CURRENT, IO (A) (5A/div) OUTPUT VOLTAGE VO (V) (200mV/div) TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=0.6V OUTPUT VOLTAGE VO (V) (200mV/div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=1.2V OUTPUT VOLTAGE VO (V) (200mV/div) OUTPUT CURRENT, IO (A) (5A/div) TIME, t (20μs /div) OUTPUT CURRENT, IO (A) (5A/div) TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=1.8V OUTPUT VOLTAGE VO (V) (200mV/div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=2.5V OUTPUT CURRENT, IO (A) (5A/div) TIME, t (20μs /div) Transient Response to Dynamic Load Change from 0% to 50% to 0%. Vin=5V, Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 8 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Startup Time OUTPUT VOLTAGE VO (V) (200mV/div) ON/OFF VOLTAGE VON/OFF (V) (2V/div) TIME, t (1 ms/div) ON/OFF VOLTAGE VON/OFF (V) (2V/div) OUTPUT VOLTAGE VO (V) (500mV/div) TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=0.8V Start-up Using On/Off Voltage (Io = Io,max), Vo=1.2V ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (500mV/div) VON/OFF (V) (2V/div) TIME, t (1 ms/div) ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (2V/div) TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=1.8V Start-up Using On/Off Voltage (Io = Io,max), Vo=2.5V ON/OFF VOLTAGE OUTPUT VOLTAGE VO (V) (1V/div) VON/OFF (V) (2V/div) TIME, t (1 ms/div) Start-up Using On/Off Voltage (Io = Io,max), Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 9 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Startup Time (continued) INPUT VOLTAGE VIN (V) (2V/div) TIME, t (1 ms/div) INPUT VOLTAGE VIN (V) (2V/div) OUTPUT VOLTAGE VO (V) (500mV/div) OUTPUT VOLTAGE VO (V) (200mV/div) TIME, t (1 ms/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=0.8V OUTPUT VOLTAGE VO (V) (500mV/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=1.2V OUTPUT VOLTAGE VO (V) (1V/div) INPUT VOLTAGE VIN (V) (2V/div) TIME, t (1 ms/div) INPUT VOLTAGE VIN (V) (2V/div) TIME, t (1 ms/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=1.8V OUTPUT VOLTAGE VO (V) (1V/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=2.5V INPUT VOLTAGE VIN (V) (2V/div) TIME, t (1 ms/div) Start-up Using Input Voltage (VIN = 5V, Io = Io,max ), Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 10 NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input, 0.6 Vdc - 3.63 Vdc /12 A Output January 13, 2011 Bel Power Inc., a subsidiary of Bel Fuse Inc. Test Configurations Input Reflected Ripple Current Test Setup. TO OSCILLOSCOPE LTEST 1μH VIN(+) CURRENT PROBE BATTERY CS 1000μF Electrolytic E.S.R.