Features
n RoHS compliant*
n Push-pull switch
n Linear and audio tapers
n PC board and bushing mount
n Splash seal
Applications
n Test and measurement equipment
n Communications equipment
n Medical diagnostic equipment
n Professional audio equipment
n Metal bushing and shaft
54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch
Electrical Characteristics1
Additional Information
Standard Resistance Range
Linear��������������������������������������������������������������������������������������������������������1K to 500K ohms
Audio��������������������������������������������������������������������������������������������������������1K to 500K ohms
Total Resistance Tolerance
B & D Tapers�������������������������������������������������������������������������������������������������������������� ±20 %
E & S Tapers�������������������������������������������������������������������������������������������������������������� ±10 %
Independent Linearity�������������������������������������������������������������������������������������������������������� ±5 %
Absolute Minimum Resistance���������������������������������������������������������������������� 2 ohms maximum
Effective Electrical Angle���������������������������������������������������������������������������������������������� 270 ° ±5
Contact Resistance Variation�������������������������������������������������������������������������������������������� ±2 %
Dielectric Withstanding Voltage (MIL-STD-202 – Method 301)
Sea Level���������������������������������������������������������������������������������������������1,500 VAC minimum
70,000�����������������������������������������������������������������������������������������������������500 VAC minimum
Insulation Resistance����������������������������������������������������������������������� 1,000 megohms minimum
Power Rating At 70 °C (Derate To 0 At 125 °C)
(Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)
Linear Tapers�����������������������������������������������������������������������������������������������������������0.5 watt
Audio Tapers����������������������������������������������������������������������������������������������������������0.25 watt
Theoretical Resolution����������������������������������������������������������������������������������� Essentially infinite
Click these links for more information:
PRODUCT
TECHNICAL INVENTORY
LIBRARY
SAMPLES
CONTACT
Environmental Characteristics1
Operating Temperature Range������������������������������������������������������������������������������������������������������������������������������������������������������ +1 °C to +125 °C
Storage Temperature Range��������������������������������������������������������������������������������������������������������������������������������������������������������-55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range������������������������������������������������������������������������������������������������������������ ±1,000 ppm/°C
Vibration������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8 G
Total Resistance Shift�����������������������������������������������������������������������������������������������������������������������������������������������������������������±2 % maximum
Voltage Ratio Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum
Shock��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 20 G
Total Resistance Shift���������������������������������������������������������������������������������������������������������������������������������������������������������������� +2 % maximum
Voltage Ratio Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum
Load Life������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 1,000 hours
Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������ ±10 % TRS maximum
Rotational Life (No Load)������������������������������������������������������������������������������������������������������������������������������������������������������������������� 50,000 cycles
Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������ ±10 % TRS maximum
Contact Resistance Variation���������������������������������������������������������������������������������������������������������������������������������������������������������������������� ±2 %
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
B & E������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±10 % TRS
D & S������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±20 % TRS
IP Rating
Entire Unit����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP64
Shaft/Bushing����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP65
Mechanical Characteristics
Stop Strength������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 39.5 N-cm (3.5 lb.-in.)
Mechanical Angle������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 290 ° ±5 °
Torque
Starting/Running����������������������������������������������������������������������������������������������������������������������������������������� 0.2 to 1.3 N-cm (0.25 to 2.0 oz.-in.)
Mounting (Torque on Bushing)�������������������������������������������������������������������������������������������������������������������������� 1.7 to 2.0 N-m (15 to 18 lb.-in.)
Weight������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10 grams
Terminals������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� PC pin
Soldering Condition��������������������������������������������������������� Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
.
Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux.
Marking�������������������������������������������������������������������������������������������������� Manufacturer’s trademark, part number, resistance value and date code.
Ganging (Multiple Section Potentiometers)�������������������������������������������������������������������� Inquire for availability, minimum order quantity and price.
Hardware������ Locking bushing versions are shipped with one additional locking nut (Bushing A: H-37-2 & H-38-2; Bushing C: H-37-1 & H-38-1)
1Electrical specifications tested at 200 RPM, at room ambient: +25 °C nominal.
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch
Initial Electrical Characteristics - Switch
Switch Type�������������������������������������������������������������������������������������������������������������������������������������������������������������������DPDT (Break before make)
Power Rating (Resistive Load)����������������������������������������������������������������������������������������������������������������������������������������������������� 0.25 A @ 30 VDC
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1000 VAC minimum
Insulation Resistance�������������������������������������������������������������������������������������������������������������������������������������������������������1500 megohms minimum
Contact Resistance������������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum
Actuating Stroke�����������������������������������������������������������������������������������������������������������������������������������������������������������0.41 cm (0.16 in.) maximum
Environmental Characteristics1
Vibration������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8 G
Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum
Contact Bounce����������������������������������������������������������������������������������������������������������������������������������������������������������� 0.1 milliseconds maximum
Shock��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 20 G
Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum
Contact Bounce����������������������������������������������������������������������������������������������������������������������������������������������������������� 0.1 milliseconds maximum
Switch Life @ Rated Power����������������������������������������������������������������������������������������������������������������������������������������������������������15,000 actuations
Switch Actuating Force���������������������������������������������������������������������������������������������������������������������������������������������������0.45 kg (1.0 lb) minimum
Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum
Insulation Resistance (After 24 Hours @ Room Temperature - 500 VDC)����������������������������������������������������������������������100 megohms minimum
1Electrical specifications tested at 200 RPM at room ambient: +25 °C nominal.
Switch Configurations (Shown in Pulled Position)
A
B
A
B
A
B
C
PULLED
D
E
E
F
F
DPST NC/NO
PUSHED
D
E
DPDT
DPST NC/NC
B
A
C
B
B
C
E
C
F
DPST NO/NO
SPST NO
SPDT
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch
Product Dimensions
B
(SEE SHAFT/
BUSHING STYLES)
L
(SEE SHAFT/
BUSHING STYLES)
MOUNTING SURFACE
24.13 ± 0.53
(.950 ± .021)
8.89 ± 0.17
(.350 ± .007)
PRIMARY UNIT
12.5
(.492)
15.24 ± 0.25
(.600 ± .010)
SWITCH MODULE
3.3 - 4.7
(.130 - .185)
SWITCH ACTUATION
TRAVEL
0.64 ± 0.05
6 PLCS.
(.025 ± .002)
5.08 ± 0.3
(.200 ± .012)
0.3
(.012)
5.08 ± 0.3
(.200 ± .012)
5.08 ± 0.3
(.200 ± .012)
11.9 ± 0.3
(.469 ± .012)
6.25
(.246)
0.76
9 PLCS.
(.030)
MOUNTING
SURFACE
2.54
(.100)
6.99
(.275)
3 PLCS.
0.66 ± 0.05
(.026 ± .002)
5.08
(.200)
11.9
(.469)
6.35 ± 0.25
(.250 ± .010)
2.54
(.100)
2.54
(.100)
5.08
(.200)
SUGGESTED PCB LAYOUT
SHAFT FLAT SHOWN AT 50 % OF MECHANICAL TRAVEL.
PACKAGE DIMENSIONS WITH FRONT AND REAR PCB MOUNTING BRACKET
2.54
(.100)
5.08
(.200)
1.02
4 PLCS.
(.040)
MOUNTING
SURFACE
0.76
9 PLCS.
(.030)
5.08
(.200)
2 PLCS.
0.91 ± 0.05
(.036 ± .002)
2 PLCS.
1.32 ± 0.25
(.052 ± .010)
0.3
(.012)
0.64 ± 0.05
6 PLCS.
(.025 ± .002)
5.08 ± 0.3
(.200 ± .012)
5.08 ± 0.3
(.200 ± .012)
2 PLCS.
0.41 ± 0.05
(.016 ± .002)
2.54
(.100)
TERMINAL
SPACING
2 PLCS.
5.08 ± 0.3
(.200 ± .012)
11.9 ± 0.3
(.469 ± .012)
6.35 ± 0.25
(.250 ± .010)
5.08
(.200)
DIMENSIONS:
5.08
(.200)
MM
(INCHES)
2.54
(.100)
2.54
(.100)
5.08
(.200)
5.08
(.200)
1.32
(.052)
5.08
(.200)
5.08
(.200)
11.9
(.469)
28.37
(1.117)
SUGGESTED PCB LAYOUT
Anti-Rotation Lug
Terminal Layout
(Style "A", 90° CW Shown)
0.80 ± 0.30
(.031 ± .012)
0.41
(.016)
Electrical Schematic
CCW
5.70
(.224)
Suggested Panel Layouts
2
.XXX = ± .13
(.005)
SHAFT DIMENSIONS ± .80
(1/32)
CW
2
1.52
(.060)
.25
FOR TOLERANCES SHOWN: .XX = ± (.010)
3
1
1
3
A
D
B
E
C
F
5.69
(.224)
2.21 DIA.
(.087)
BUSHING DIAMETER
+0.79
(+.031)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch
Hardware
Date Code Description
LOCKWASHER H-37-1
YYWWM
NUT H-38-1
6.6
(.26)
9.53 +0/-0.38
(.375 +0/-.015)
2.36 ± 0.25
(.093 ± .01)
1/4-32 UNEF
M = COUNTRY OF MANUFACTURE
(MEXICO)
WW = WEEK NUMBER
YY = LAST TWO DIGITS OF YEAR
MANUFACTURED
12.07 ± 0.25
(.475 ± .01)
0.64 ± 0.05
(.025 ± .002)
LOCKWASHER H-37-2
11 +0/-0.43
(.433 +0/-.017)
30 ° ± 5 °
TYP.
NUT H-38-2
9.58 ± 0.36
(.377 ± .014)
2.36 ± 0.25
(.093 ± .01)
3/8-32 NEF-2B
12.52 ± 0.36
(.493 ± .014)
0.56 ± 0.05
(.022 ± .002)
DIMENSIONS:
14.66 +0/-0.43
(.577 +0/-.017)
30 ° ± 5 °
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch
Shaft/Bushing Styles
9.53
(.375)
1.60 ± 0.25
OPT.
(.063 ± .010)
1.60 ± 0.25
OPT.
(.063 ± .010)
A6.35
Style Bushing
STD. LENGTH 0.79
‘L’ ± 0.25 OPT.
(.250)
± 0.10
(.0311.194
± .010)
.750 (19.05)
OPT.
(.047 ± .004)
.875 (22.23)
3/8-32UNEF-2A
6.35
9.53
SHAFT
BUSHING
(.250)
(.375)9.53
1/4-32UNEF-2A
(.375)
3.18
6.35
SHAFT
6.35BUSHING
(.125)
(.250)
(.250)
54
A
A
D
-
C
28
-
B
15
/
P50
L
1.194 ± 0.10
OPT.
(.047 ± .004)
3/8-32UNEF-2A
6.35
9.539.53
SHAFT
BUSHING
(.250)
(.375)
(.375)
How To Order
0.79 ± 0.10
OPT.
(.031 ± .004)
1.60 ± 0.25
OPT.
(.063 ± .010)
0.79 ± 0.25
OPT.
(.031 ± .010)
1.194 ± 0.10
15.88
9.53
OPT.
MAX. FLAT LENGTH
(.047
±
.004)
(.625)
(.375)
3/8-32UNEF-2A
1.52 ± 0.25
OPT.
0.79 ± 0.10
(.060
±
.010)
OPT.
6.35
9.53
(.031 ± .004)
SHAFT
BUSHING
1/4-32UNEF-2A
(.250)
(.375)
3.18
6.35
SHAFT
BUSHING
(.125)
(.250)
6.35
± 0.10
0.795.49
± 0.25
(.250)
OPT. OPT.
± .005)
3/8-32UNEF-2A
(.031(.216
± .010)
15.88
9.53
C Style
Bushing
MAX.
FLAT LENGTH
6.35 (.375) 9.53
(.625)
SHAFT
BUSHING
STD.
LENGTH
1.52
± 0.25‘L’
(.250)
(.375)
OPT.
.750
(.060 (19.05)
± .010) 0.79 ± 0.10
OPT.
.875
(22.23)
(.031 ± .004)
1/4-32UNEF-2A
RoHS IDENTIFIER
Code Description
L
Compliant
ANTI-ROTATION LUG /
BRACKET OPTION
Code Description
AR Lug 90 ° CW
A
No AR Lug or Bracket
D
Front Bracket
L
Front and Rear Bracket
N
SWITCH OPTION
Code Description
P50 DPDT
NO. OF SECTIONS
Code Description
A
Single plus Switch
RESISTANCE CODES
Code Value in Ohms
10 1K
13 5K
15 10K
18 50K
20 100K
22 250K
23 500K
BUSHING DESIGNATOR
Code Description
3/8 ” D x 3/8 ” L Threaded
A
1/4 ” D x 1/4 ” L Threaded
C
ELEMENT TAPER
TYPE/TOLERANCE
Code Description
Linear CP ±20 %
B
Linear CP ±10 %
E
CW Audio CP ±20 %
D
CW Audio CP ±10 %
S
MODEL
Code Description
54 PC Terminals w/Push-Pull
Switch
3.18
6.35
SHAFT
BUSHING
(.125)
(.250)
5.49 ± 0.10
OPT.
(.216 ± .005)
3/8-32UNEF-2A
15.88
9.53 9.53
6.35
MAX. FLAT LENGTH
SHAFT
BUSHING
(.625)
(.250) (.375) (.375)
1.52 ± 0.25
OPT.
(.060 ± .010)
5.49 ± 0.10
OPT.
(.216 ± .005)
3/8-32UNEF-2A
6.35
9.53
SHAFT
BUSHING
(.250)
(.375)
A Style Bushing Flatted Shaft
SHAFT LENGTH DESIGNATOR
Code Description
24 3/4 ” FMS Long
28 7/8 ” FMS Long
Boldface features are Bourns
standard options. All others are
available with higher minimum
order quantities.
Code
B
C
E
SHAFT STYLE
Description
1/4 ” D Slotted End
1/4 ” D Flatted End
1/8 ” D Slotted End
AVAILABLE ONLY WITH
BUSHING
Code
A
A
C
STD. LENGTH ‘L’
.750 (19.05)
.875 (22.23)
DIMENSIONS:
MM
(INCHES)
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
REV. 06/21
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R