0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
54CAD-E28-B15/P50L

54CAD-E28-B15/P50L

  • 厂商:

    BOURNS(伯恩斯)

  • 封装:

    -

  • 描述:

    电位器(操纵杆) 10KΩ ±20% ±1000ppm/℃

  • 数据手册
  • 价格&库存
54CAD-E28-B15/P50L 数据手册
Features n RoHS compliant* n Push-pull switch n Linear and audio tapers n PC board and bushing mount n Splash seal Applications n Test and measurement equipment n Communications equipment n Medical diagnostic equipment n Professional audio equipment n Metal bushing and shaft 54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch Electrical Characteristics1 Additional Information Standard Resistance Range Linear��������������������������������������������������������������������������������������������������������1K to 500K ohms Audio��������������������������������������������������������������������������������������������������������1K to 500K ohms Total Resistance Tolerance B & D Tapers�������������������������������������������������������������������������������������������������������������� ±20 % E & S Tapers�������������������������������������������������������������������������������������������������������������� ±10 % Independent Linearity�������������������������������������������������������������������������������������������������������� ±5 % Absolute Minimum Resistance���������������������������������������������������������������������� 2 ohms maximum Effective Electrical Angle���������������������������������������������������������������������������������������������� 270 ° ±5 Contact Resistance Variation�������������������������������������������������������������������������������������������� ±2 % Dielectric Withstanding Voltage (MIL-STD-202 – Method 301) Sea Level���������������������������������������������������������������������������������������������1,500 VAC minimum 70,000�����������������������������������������������������������������������������������������������������500 VAC minimum Insulation Resistance����������������������������������������������������������������������� 1,000 megohms minimum Power Rating At 70 °C (Derate To 0 At 125 °C) (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less) Linear Tapers�����������������������������������������������������������������������������������������������������������0.5 watt Audio Tapers����������������������������������������������������������������������������������������������������������0.25 watt Theoretical Resolution����������������������������������������������������������������������������������� Essentially infinite Click these links for more information: PRODUCT TECHNICAL INVENTORY LIBRARY SAMPLES CONTACT Environmental Characteristics1 Operating Temperature Range������������������������������������������������������������������������������������������������������������������������������������������������������ +1 °C to +125 °C Storage Temperature Range��������������������������������������������������������������������������������������������������������������������������������������������������������-55 °C to +125 °C Temperature Coefficient Over Storage Temperature Range������������������������������������������������������������������������������������������������������������ ±1,000 ppm/°C Vibration������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8 G Total Resistance Shift�����������������������������������������������������������������������������������������������������������������������������������������������������������������±2 % maximum Voltage Ratio Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum Shock��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 20 G Total Resistance Shift���������������������������������������������������������������������������������������������������������������������������������������������������������������� +2 % maximum Voltage Ratio Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum Load Life������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 1,000 hours Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������ ±10 % TRS maximum Rotational Life (No Load)������������������������������������������������������������������������������������������������������������������������������������������������������������������� 50,000 cycles Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������ ±10 % TRS maximum Contact Resistance Variation���������������������������������������������������������������������������������������������������������������������������������������������������������������������� ±2 % Moisture Resistance (MIL-STD-202, Method 103, Condition B) B & E������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±10 % TRS D & S������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±20 % TRS IP Rating Entire Unit����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP64 Shaft/Bushing����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP65 Mechanical Characteristics Stop Strength������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 39.5 N-cm (3.5 lb.-in.) Mechanical Angle������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 290 ° ±5 ° Torque Starting/Running����������������������������������������������������������������������������������������������������������������������������������������� 0.2 to 1.3 N-cm (0.25 to 2.0 oz.-in.) Mounting (Torque on Bushing)�������������������������������������������������������������������������������������������������������������������������� 1.7 to 2.0 N-m (15 to 18 lb.-in.) Weight������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10 grams Terminals������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� PC pin Soldering Condition��������������������������������������������������������� Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter. . Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux. . Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux. Marking�������������������������������������������������������������������������������������������������� Manufacturer’s trademark, part number, resistance value and date code. Ganging (Multiple Section Potentiometers)�������������������������������������������������������������������� Inquire for availability, minimum order quantity and price. Hardware������ Locking bushing versions are shipped with one additional locking nut (Bushing A: H-37-2 & H-38-2; Bushing C: H-37-1 & H-38-1) 1Electrical specifications tested at 200 RPM, at room ambient: +25 °C nominal. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch Initial Electrical Characteristics - Switch Switch Type�������������������������������������������������������������������������������������������������������������������������������������������������������������������DPDT (Break before make) Power Rating (Resistive Load)����������������������������������������������������������������������������������������������������������������������������������������������������� 0.25 A @ 30 VDC Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1000 VAC minimum Insulation Resistance�������������������������������������������������������������������������������������������������������������������������������������������������������1500 megohms minimum Contact Resistance������������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum Actuating Stroke�����������������������������������������������������������������������������������������������������������������������������������������������������������0.41 cm (0.16 in.) maximum Environmental Characteristics1 Vibration������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 8 G Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum Contact Bounce����������������������������������������������������������������������������������������������������������������������������������������������������������� 0.1 milliseconds maximum Shock��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 20 G Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum Contact Bounce����������������������������������������������������������������������������������������������������������������������������������������������������������� 0.1 milliseconds maximum Switch Life @ Rated Power����������������������������������������������������������������������������������������������������������������������������������������������������������15,000 actuations Switch Actuating Force���������������������������������������������������������������������������������������������������������������������������������������������������0.45 kg (1.0 lb) minimum Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum Moisture Resistance (MIL-STD-202, Method 103, Condition B) Contact Resistance����������������������������������������������������������������������������������������������������������������������������������������������������������100 milliohms maximum Insulation Resistance (After 24 Hours @ Room Temperature - 500 VDC)����������������������������������������������������������������������100 megohms minimum 1Electrical specifications tested at 200 RPM at room ambient: +25 °C nominal. Switch Configurations (Shown in Pulled Position) A B A B A B C PULLED D E E F F DPST NC/NO PUSHED D E DPDT DPST NC/NC B A C B B C E C F DPST NO/NO SPST NO SPDT Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch Product Dimensions B (SEE SHAFT/ BUSHING STYLES) L (SEE SHAFT/ BUSHING STYLES) MOUNTING SURFACE 24.13 ± 0.53 (.950 ± .021) 8.89 ± 0.17 (.350 ± .007) PRIMARY UNIT 12.5 (.492) 15.24 ± 0.25 (.600 ± .010) SWITCH MODULE 3.3 - 4.7 (.130 - .185) SWITCH ACTUATION TRAVEL 0.64 ± 0.05 6 PLCS. (.025 ± .002) 5.08 ± 0.3 (.200 ± .012) 0.3 (.012) 5.08 ± 0.3 (.200 ± .012) 5.08 ± 0.3 (.200 ± .012) 11.9 ± 0.3 (.469 ± .012) 6.25 (.246) 0.76 9 PLCS. (.030) MOUNTING SURFACE 2.54 (.100) 6.99 (.275) 3 PLCS. 0.66 ± 0.05 (.026 ± .002) 5.08 (.200) 11.9 (.469) 6.35 ± 0.25 (.250 ± .010) 2.54 (.100) 2.54 (.100) 5.08 (.200) SUGGESTED PCB LAYOUT SHAFT FLAT SHOWN AT 50 % OF MECHANICAL TRAVEL. PACKAGE DIMENSIONS WITH FRONT AND REAR PCB MOUNTING BRACKET 2.54 (.100) 5.08 (.200) 1.02 4 PLCS. (.040) MOUNTING SURFACE 0.76 9 PLCS. (.030) 5.08 (.200) 2 PLCS. 0.91 ± 0.05 (.036 ± .002) 2 PLCS. 1.32 ± 0.25 (.052 ± .010) 0.3 (.012) 0.64 ± 0.05 6 PLCS. (.025 ± .002) 5.08 ± 0.3 (.200 ± .012) 5.08 ± 0.3 (.200 ± .012) 2 PLCS. 0.41 ± 0.05 (.016 ± .002) 2.54 (.100) TERMINAL SPACING 2 PLCS. 5.08 ± 0.3 (.200 ± .012) 11.9 ± 0.3 (.469 ± .012) 6.35 ± 0.25 (.250 ± .010) 5.08 (.200) DIMENSIONS: 5.08 (.200) MM (INCHES) 2.54 (.100) 2.54 (.100) 5.08 (.200) 5.08 (.200) 1.32 (.052) 5.08 (.200) 5.08 (.200) 11.9 (.469) 28.37 (1.117) SUGGESTED PCB LAYOUT Anti-Rotation Lug Terminal Layout (Style "A", 90° CW Shown) 0.80 ± 0.30 (.031 ± .012) 0.41 (.016) Electrical Schematic CCW 5.70 (.224) Suggested Panel Layouts 2 .XXX = ± .13 (.005) SHAFT DIMENSIONS ± .80 (1/32) CW 2 1.52 (.060) .25 FOR TOLERANCES SHOWN: .XX = ± (.010) 3 1 1 3 A D B E C F 5.69 (.224) 2.21 DIA. (.087) BUSHING DIAMETER +0.79 (+.031) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch Hardware Date Code Description LOCKWASHER H-37-1 YYWWM NUT H-38-1 6.6 (.26) 9.53 +0/-0.38 (.375 +0/-.015) 2.36 ± 0.25 (.093 ± .01) 1/4-32 UNEF M = COUNTRY OF MANUFACTURE (MEXICO) WW = WEEK NUMBER YY = LAST TWO DIGITS OF YEAR MANUFACTURED 12.07 ± 0.25 (.475 ± .01) 0.64 ± 0.05 (.025 ± .002) LOCKWASHER H-37-2 11 +0/-0.43 (.433 +0/-.017) 30 ° ± 5 ° TYP. NUT H-38-2 9.58 ± 0.36 (.377 ± .014) 2.36 ± 0.25 (.093 ± .01) 3/8-32 NEF-2B 12.52 ± 0.36 (.493 ± .014) 0.56 ± 0.05 (.022 ± .002) DIMENSIONS: 14.66 +0/-0.43 (.577 +0/-.017) 30 ° ± 5 ° MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 54 – 1/2 ˝ (12.5 mm) Panel Control w/Push-Pull Switch Shaft/Bushing Styles 9.53 (.375) 1.60 ± 0.25 OPT. (.063 ± .010) 1.60 ± 0.25 OPT. (.063 ± .010) A6.35 Style Bushing STD. LENGTH 0.79 ‘L’ ± 0.25 OPT. (.250) ± 0.10 (.0311.194 ± .010) .750 (19.05) OPT. (.047 ± .004) .875 (22.23) 3/8-32UNEF-2A 6.35 9.53 SHAFT BUSHING (.250) (.375)9.53 1/4-32UNEF-2A (.375) 3.18 6.35 SHAFT 6.35BUSHING (.125) (.250) (.250) 54 A A D - C 28 - B 15 / P50 L 1.194 ± 0.10 OPT. (.047 ± .004) 3/8-32UNEF-2A 6.35 9.539.53 SHAFT BUSHING (.250) (.375) (.375) How To Order 0.79 ± 0.10 OPT. (.031 ± .004) 1.60 ± 0.25 OPT. (.063 ± .010) 0.79 ± 0.25 OPT. (.031 ± .010) 1.194 ± 0.10 15.88 9.53 OPT. MAX. FLAT LENGTH (.047 ± .004) (.625) (.375) 3/8-32UNEF-2A 1.52 ± 0.25 OPT. 0.79 ± 0.10 (.060 ± .010) OPT. 6.35 9.53 (.031 ± .004) SHAFT BUSHING 1/4-32UNEF-2A (.250) (.375) 3.18 6.35 SHAFT BUSHING (.125) (.250) 6.35 ± 0.10 0.795.49 ± 0.25 (.250) OPT. OPT. ± .005) 3/8-32UNEF-2A (.031(.216 ± .010) 15.88 9.53 C Style Bushing MAX. FLAT LENGTH 6.35 (.375) 9.53 (.625) SHAFT BUSHING STD. LENGTH 1.52 ± 0.25‘L’ (.250) (.375) OPT. .750 (.060 (19.05) ± .010) 0.79 ± 0.10 OPT. .875 (22.23) (.031 ± .004) 1/4-32UNEF-2A RoHS IDENTIFIER Code Description L Compliant ANTI-ROTATION LUG / BRACKET OPTION Code Description AR Lug 90 ° CW A No AR Lug or Bracket D Front Bracket L Front and Rear Bracket N SWITCH OPTION Code Description P50 DPDT NO. OF SECTIONS Code Description A Single plus Switch RESISTANCE CODES Code Value in Ohms 10 1K 13 5K 15 10K 18 50K 20 100K 22 250K 23 500K BUSHING DESIGNATOR Code Description 3/8 ” D x 3/8 ” L Threaded A 1/4 ” D x 1/4 ” L Threaded C ELEMENT TAPER TYPE/TOLERANCE Code Description Linear CP ±20 % B Linear CP ±10 % E CW Audio CP ±20 % D CW Audio CP ±10 % S MODEL Code Description 54 PC Terminals w/Push-Pull Switch 3.18 6.35 SHAFT BUSHING (.125) (.250) 5.49 ± 0.10 OPT. (.216 ± .005) 3/8-32UNEF-2A 15.88 9.53 9.53 6.35 MAX. FLAT LENGTH SHAFT BUSHING (.625) (.250) (.375) (.375) 1.52 ± 0.25 OPT. (.060 ± .010) 5.49 ± 0.10 OPT. (.216 ± .005) 3/8-32UNEF-2A 6.35 9.53 SHAFT BUSHING (.250) (.375) A Style Bushing Flatted Shaft SHAFT LENGTH DESIGNATOR Code Description 24 3/4 ” FMS Long 28 7/8 ” FMS Long Boldface features are Bourns standard options. All others are available with higher minimum order quantities. Code B C E SHAFT STYLE Description 1/4 ” D Slotted End 1/4 ” D Flatted End 1/8 ” D Slotted End AVAILABLE ONLY WITH BUSHING Code A A C STD. LENGTH ‘L’ .750 (19.05) .875 (22.23) DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 06/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R
54CAD-E28-B15/P50L 价格&库存

很抱歉,暂时无法提供与“54CAD-E28-B15/P50L”相匹配的价格&库存,您可以联系我们找货

免费人工找货