SM91501ALE

G R A DE n Hi-Pot: 4300 Vdc n Two channels with choke n Supports serial daisy chain / IsoSPI 14.73 ± 0.25 n Holds reference designs with Analog (0.580 ± 0.010) Device’s Model and 14.81 LTC6804-1/6811 ± 0.25 (0.583 ± 0.010) NXP’s MC33771/33772 10.03 ± 0.13 n Operating temperature: -40 to +125 °C (0.395 ± 0.005) AE C- *R Q2 o 00 HS CO an M d PL IA NT Features AUTOMOTIVE n AEC-Q200 compliant n RoHS compliant* n 1600 Vdc working voltage Electrical Specifications @ 25 °C OCL (100 kHz, 0.1 V, (-40 °C ~ +125 °C) ......................................... 150 µH min. 450 µH max. Leakage Inductance (100 kHz, 0.1 V)............... 0.5 µH max. DCR Transformer Side....... 0.45 ohms max. CM Choke Side.......... 0.85 ohms max. Turns Ratio................................1:1 ±2 % Insertion Loss 4 MHz.............................-0.25 dB max. Return Loss (Z out = 100 ohms) 4 MHz.................................-22 dB min. Cross Talk (Between Each Channel) 4 MHz.................................-50 dB min. Common Mode Rejection Ratio 1~200 MHz.........................-35 dB min. Hi-Pot (1 mA, 60 sec.) ....................... 4300 VDC or 3100 VAC Design Construction ............................ Functional insulation Working Voltage...1600 Vdc for 15 years Operating Temperature Range .................................-40 °C to +125 °C Storage Temperature Range .................................-50 °C to +125 °C Moisture Sensitivity Level......................1 ESD Classification (HBM)................. N/A Packaging Specifications SM91501ALYYWW BMS Transformer SM91501AL Electrical Schematic 1CT : 1CT PIN 1 DOT 1 11.68 ± 0.25 (0.460 ± 0.010) 2 5.0 MAX. (0.197) 3 4 2.00 ± 0.1312 (0.079 ± 0.005) Model 10 1CT :CT1 8 6 7 TECHNICAL INVENTORY LIBRARY SAMPLES CONTACT Product Dimensions 14.73 ± 0.25 (0.580 ± 0.010) 14.81 ± 0.25 (0.583 ± 0.010) 10.03 ± 0.13 (0.395 ± 0.005) 1.14 ± 0.13 12 PLCS. (0.045 ± 0.005) Recommended Layout 10.03 TYP. (0.395) YYWW 2.00 TYP. (0.079) SM91501AL TYP. 12.07 (0.475) TYP. 15.50 (0.610) PIN 1 DOT 11.68 ± 0.25 (0.460 ± 0.010) 2.00 ± 0.13 (0.079 ± 0.005) 5.0 MAX. (0.197) 1.02 (0.040) TYP. DIMENSIONS: MM (INCHES) 0.13 MIN. (0.005) 1.14 ± 0.13 12 PLCS. (0.045 ± 0.005) 10.03 TYP. (0.395) 2.00 TYP. (0.079) Automotive Grade Designator A = AEC-Q200 Compliant Packaging E = Tape and Reel (400 pcs./13-inch reel) PRODUCT 9 0.13 5 (0.005) MIN. SM91501 A L - E Termination L = Cu/Ni/Sn (RoHS compliant*) Click these links for more information: 11 Tape & Reel........... 400 pcs./13-inch reel How To Order Additional Information Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com TYP. 12.07 (0.475) TYP. 15.50 (0.610) 1.02 (0.040) TYP. DIMENSIONS: WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov MM (INCHES) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SM91501AL BMS Transformer Solder Profile tp Tp CRITICAL ZONE TL to TP Temperature (°C) RAMP-UP TL tL Tsmax Tsmin RAMP-DOWN ts Preheat 25 t 25 °C to Peak Time (Seconds) Reflow Condition Pb-free Assembly Average Ramp-up Rate 3 °C / second max. Temperature Min. (Tsmin) Preheat Temperature Max. (Tsmax) Time (Tsmin to Tsmax) 150 °C 200 °C 60 ~ 180 seconds Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (tL) 60 ~ 150 seconds Peak Temperature (Tp) 245 - 250 °C Time within 5 °C of Actual Peak Temperature (Tp) 20 ~ 40 seconds Ramp-down Rate from Peak Temperature 6 °C / second max. Time from 25 °C to Peak Temperature (Tp) 8 minutes max. Do not Exceed 260 ° C Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SM91501AL BMS Transformer Packaging Specifications 30.5 MAX. (1.201) DETAIL A Specifications and tolerances comply with EIA-481 requirements. 30.4 MAX. (1.197) 21.0 ± 0.8 DIA. (0.827 ± 0.031) 2.6 ± 0.3 (0.102 ± 0.012) 1.5 MIN. (.059) 13.0 +0.8/-0.2 (0.512 +0.031/-0.008) DIA. 330.0 ± 2.0 (12.99 ± .079) DIA. 100 24.5 ± 0.2 (0.965 ± 0.008) 24.4 +2/-0 (.961 +.079/-0) DETAIL “A” 24.0 (0.945) END 4.0 (0.157) START SM91501AL 24.0 (0.945) YYWW YYWW SM91501AL YYWW SM91501AL LEADER NO COMPONENT 160 MIN. (6.299) 330 ± 2.0 (12.992 ± 0.079) 13.2 ± 0.2 DIA. DIA. (.520 ± .008) 100.0 ± 2.0 (3.937) (3.937 ± .079) MIN. DIA. DIA. DETAIL A “A” 20.2 DIA. MIN. (.795) COMPONENTS USER DIRECTION OF FEED TRAILER NO COMPONENT 400 MIN. (15.748) QUANTITY: 400 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 06/21 EFFECTIVE 09/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R