SN54AC00VTD2

SN54AC00-DIE www.ti.com SCHS391A – APRIL 2013 – REVISED NOVEMBER 2013 RAD-TOLERANT, QUADRUPLE 2-INPUT POSITIVE-NAND GATE Check for Samples: SN54AC00-DIE FEATURES 1 • • • 2-V to 6-V VCC Operation Inputs Accept Voltages to 6 V Max tpd of 7 ns at 5 V DESCRIPTION/ORDERING INFORMATION The SN54AC00-DIE device contains four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A • B or Y = A + B in positive logic. ORDERING INFORMATION (1) (1) (2) PRODUCT PACKAGE DESIGNATOR PACKAGE SN54AC00 TD Bare die in waffle pack (2) ORDERABLE PART NUMBER PACKAGE QUANTITY SN54AC00VTD1 100 SN54AC00VTD2 10 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Processing is per the Texas Instruments space production baseline and is in compliance with the Texas Instruments Quality Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2013, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. SN54AC00-DIE SCHS391A – APRIL 2013 – REVISED NOVEMBER 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. BARE DIE INFORMATION 2 DIE THICKNESS BACKSIDE FINISH BACKSIDE POTENTIAL BOND PAD METALLIZATION COMPOSITION BOND PAD THICKNESS 10.5 mils. Silicon with backgrind Floating AlCuTiW 830 nm Submit Documentation Feedback Copyright © 2013, Texas Instruments Incorporated Product Folder Links: SN54AC00-DIE SN54AC00-DIE www.ti.com SCHS391A – APRIL 2013 – REVISED NOVEMBER 2013 Table 1. Bond Pad Coordinates in Microns DESCRIPTION PAD NUMBER X MIN Y MIN X MAX Y MAX 1A 1 96.25 510.5 201.25 615.5 1B 2 95 94 200 199 1Y 3 508 94 613 199 2A 4 1149 94 1254 199 2B 5 1562 94 1667 199 2Y 6 1841.5 145.5 1946.5 250.5 GND 7 1841.5 445.5 1946.5 550.5 3Y 8 1841 783 1946 888 3A 9 1750.5 991 1855.5 1096 3B 10 1176.5 991 1281.5 1096 4Y 11 921 991 1026 1096 4A 12 736 991 841 1096 4B 13 95 991 200 1096 VCC 14 102.5 692 207.5 797 xxx REVISION HISTORY Changes from Original (April 2013) to Revision A Page • Changed bare die diagram ................................................................................................................................................... 2 • Changed Bond Pad Coordinates .......................................................................................................................................... 3 Submit Documentation Feedback Copyright © 2013, Texas Instruments Incorporated Product Folder Links: SN54AC00-DIE 3 PACKAGE OPTION ADDENDUM www.ti.com 4-Feb-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking (4/5) (6) SN54AC00VTD1 ACTIVE 0 100 RoHS & Green Call TI N / A for Pkg Type 25 to 25 SN54AC00VTD2 ACTIVE 0 10 RoHS & Green Call TI N / A for Pkg Type 25 to 25 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of