SNJ54AHC04J

SN54AHC04, SN74AHC04 SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 SNx4AHC04 HEX INVERTERS 1 Features 2 Description • • The 'AHC04 devices contain six independent inverters. These devices perform the Boolean function Y = A. Operating range of 2 V to 5.5 V Latch-up performance exceeds 250 mA per JESD 17 Device Information PART NUMBER SN54AHC04 SN74AHC04 PACKAGE1 BODY SIZE2 J (CDIP, 14) 19.56 mm × 6.67 mm W (CFP, 14) 13.1 mm × 6.92 mm FK (LCCC, 20) 8.9 mm × 8.9 mm N (PDIP, 14) 19.3 mm × 6.35 mm D (SOIC, 14) 8.65 mm × 3.91 mm DB (SSOP, 14) 6.20 mm × 5.30 mm NS (SOP, 14) 12.60 mm × 5.30 mm PW (TSSOP, 14) 5.00 mm × 4.40 mm DGV (TVSOP, 14) 3.6 mm × 4.4 mm RGY (VQFN, 14) 3.50 mm × 3.50 mm BQA (WQFN, 14) 3 mm × 2.5 mm 1. For all available packages, see the orderable addendum at the end of the data sheet. 2. The package size (length × width) is a nominal value and includes pins, where applicable. Figure 2-1. Logic Diagram, Each Gate (Positive Logic) An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA. SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 Table of Contents 1 Features............................................................................1 2 Description.......................................................................1 3 Revision History.............................................................. 2 4 Pin Configuration and Functions...................................3 5 Specifications.................................................................. 4 5.1 Absolute Maximum Ratings........................................ 4 5.2 ESD Ratings............................................................... 4 5.3 Recommended Operating Conditions ........................4 5.4 Thermal Information....................................................5 5.5 Electrical Characteristics.............................................5 5.6 Switching Characteristics............................................5 5.7 Switching Characteristics, VCC = 5 V ± 0.5 V..............6 5.8 Noise Characteristics.................................................. 6 5.9 Operating Characteristics........................................... 6 6 Parameter Measurement Information............................ 7 7 Detailed Description........................................................8 7.1 Functional Block Diagram........................................... 8 7.2 Device Functional Modes............................................8 8 Device and Documentation Support..............................9 8.1 Documentation Support (Analog)................................9 8.2 Receiving Notification of Documentation Updates......9 8.3 Support Resources..................................................... 9 8.4 Trademarks................................................................. 9 8.5 Electrostatic Discharge Caution..................................9 8.6 Glossary......................................................................9 9 Mechanical, Packaging, and Orderable Information.... 9 3 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision O (May 2023) to Revision P (June 2023) Page • Added BQA package to Device Information table.............................................................................................. 1 • Added Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ............................................................................................................................................................... 1 • Updated thermal values for RθJA: D = 86 to 124.5, PW = 113 to 147.7, all values in °C/W ............................. 5 • Added thermal value for RθJA: BQA = 88.3, all values in °C/W.........................................................................5 Changes from Revision N (May 2013) to Revision O (May 2023) Page • Added Package Information table, Pin Functions table, and Thermal Information table....................................1 2 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 4 Pin Configuration and Functions Figure 4-1. SN54AHC04 J or W Package SN74AHC04 D, DB, DGV, N, NS, or PW Package (Top View) Figure 4-2. SN74AHC04 RGY or BQA Package (Top View) Figure 4-3. SN54AHC04 FK Package (Top View) Table 4-1. Pin Functions PIN SN74AHC04 NAME SN54AHC04 I/O DESCRIPTION D, DB, DGV, N, NS, PW RGY, BQA J, W FK 1A 1 1 1 2 I 1A Input 1Y 2 2 2 3 O 1Y Output 2A 3 3 3 4 I 2A Input 2Y 4 4 4 6 O 2Y Output 3A 5 5 5 8 I 3A Input 3Y 6 6 6 9 O 3Y Output 4A 9 9 9 13 I 4A Input 4Y 8 8 8 12 O 4Y Output 5A 11 11 11 16 I 5A Input 5Y 10 10 10 14 I 5Y Output 6A 13 13 13 19 I 6A Input 6Y 12 12 12 18 O 6Y Output GND 7 7 7 10 — Ground Pin — No Connection — Power Pin 1 5 NC — — — 7 11 15 17 VCC 14 14 14 20 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 3 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 5 Specifications 5.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted)(1) VCC VI (2) MIN MAX Supply voltage range –0.5 7 UNIT V Input voltage range –0.5 7 V VO (2) Output voltage range –0.5 VCC + 0.5 V IIK Input clamp current (VI < 0) –20 mA IOK Output clamp current (VO < 0 or VO > VCC) ±20 mA IOK Continuous output current (VO = 0 to VCC) ±25 mA ±50 mA 150 °C Continuous current through VCC or GND Tstg (1) (2) Storage temperature range –65 Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 5.2 ESD Ratings VALUE Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all V(ESD) (1) (2) Electrostatic discharge pins(1) UNIT ±2000 Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(2) V ±1000 JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 5.3 Recommended Operating Conditions SN54AHC04 VCC Supply voltage VIH High-level input voltage MIN MAX MIN MAX 2 5.5 2 5.5 VCC= 2 V 1.5 1.5 VCC= 3V 2.1 2.1 VCC= 5.5 V 3.85 VCC= 2 V VIL Low-level Input voltage VCC= 3 V UNIT V V 3.85 0.5 VCC= 5.5 V 0.5 0.9 0.9 1.65 1.65 V VI Input voltage 0 5.5 0 5.5 V VO Output voltage 0 VCC 0 VCC V IOH High-level output current VCC= 2 V IOL 4 SN74AHC04 Low-level output current Δt/Δv Input Transition rise or fall rate TA Operating free-air temperature –50 –50 VCC= 3.3 V ± 0.3 V –4 –4 VCC= 5 V ± 0.5 V –8 –8 VCC= 2 V 50 50 VCC= 3.3 V ± 0.3 V 4 4 VCC= 5 V ± 0.5 V 8 8 100 100 20 20 VCC= 3.3 V ± 0.3 V VCC= 5 V ± 0.5 V –55 Submit Document Feedback 125 –40 125 mA mA ns/V °C Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 5.4 Thermal Information SNx4AHC04 THERMAL METRIC1 D DB DGV N NS PW RGY BQA UNIT 76 147.7 47 88.3 °C/W 14 PINS RθJA (1) Junction-to-ambient thermal resistance 124.5 96 127 80 For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, (SPRA953). 5.5 Electrical Characteristics over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN54AHC04 SN74AHC04 TA = –40°C TO 125°C MAX MIN MAX MIN Recommended UNIT SN74AHC04 MIN TYP 2V 1.9 2 1.9 1.9 MAX MIN 1.9 3V 2.9 3 2.9 2.9 2.9 4.5 V 4.4 4.5 4.4 4.4 4.4 IOH = –4 mA 3V 2.58 2.48 2.48 2.48 IOH = –8 mA 4.5 V 3.94 3.8 3.8 VOH MAX V 3.8 2V 0.1 0.1 0.1 0.1 3V 0.1 0.1 0.1 0.1 4.5 V 0.1 0.1 0.1 0.1 IOH = 4 mA 3V 0.36 0.5 0.44 0.5 IOH = 8 mA 4.5 V 0.36 0.5 0.44 0.5 ±0.1 ±1(1) ±1 ±1 µA 2 20 20 20 µA IOL = 50 µA VOL II VI = 5.5 V or GND ICC VI = VCC or GND, Ci VI = VCC or GND (1) TA = –40°C TO 85°C TA = 25°C VCC IOH = –50 µA TA = –55°C TO 125°C 0 V to 5.5 V IO = 0 5.5 V 5V 2 10 V 10 pF On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V. 5.6 Switching Characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Load Circuit and Voltage Waveforms) PARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE TA = 25°C TYP tPLH tPHL tPLH tPHL (1) A Y CL = 15 pF A Y CL = 50 pF MAX (1) 8.9 5 (1) 8.9 7.5 11.4 7.5 11.4 5 TA = –40°C TO 125°C TA = –55°C TO 125°C TA = –40°C TO 85°C SN54AHC04 SN74AHC04 SN74AHC04 MIN MIN MIN 1 (1) 1 MAX (1) (1) 10.5 (1) 10.5 MAX Recommended UNIT MAX (1) 1 10.5 1 10.5 (1) 1 10.5 1 10.5 1 13 1 13 1 13 1 13 1 13 1 13 ns ns On products compliant to MIL-PRF-38535, this parameter is not production tested. Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 5 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 5.7 Switching Characteristics, VCC = 5 V ± 0.5 V over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Load Circuit and Voltage Waveforms) PARAMETER FROM (INPUT) tPLH tPHL tPLH tPHL TO (OUTPUT) TEST CONDITIONS A Y CL = 15 pF A Y CL = 50 pF TA = 25°C TA = –55°C TO 125°C TA = –40°C TO 85°C SN54AHC04 SN74AHC04 MIN MIN MAX TA = –40°C TO 125°C Recommended UNIT SN74AHC04 TYP MAX 3.81 5.51 11 6.51 1 MAX 6.5 MIN 1 MAX 6.5 3.81 5.51 11 6.51 1 6.5 1 6.5 5.3 7.5 1 8.5 1 8.5 1 8.5 5.3 7.5 1 8.5 1 8.5 1 8.5 ns ns 1. On products compliant to MIL-PRF-38535, this parameter is not production tested. 5.8 Noise Characteristics VCC = 5 V, CL = 50 pF, TA = 25°C(1) SN74AHC04 PARAMETER MIN TYP UNIT MAX VOL(P) Quiet output, maximum dynamic VOL 0.4 V VOL(V) Quiet output, minimum dynamic VOL –0.4 V VOH(V) Quiet output, minimum dynamic VOH 4.8 V VIH(D) High-level dynamic input voltage VIL(D) Low-level dynamic input voltage (1) 3.5 V 1.5 V Characteristics are for surface-mount packages only. 5.9 Operating Characteristics VCC = 5 V, TA = 25°C PARAMETER Cpd 6 Power dissipation capacitance TEST CONDITIONS No load, Submit Document Feedback f = 1 MHz TYP 12 UNIT pF Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 6 Parameter Measurement Information A. B. C. D. E. CL includes probe and jig capacitance. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. The outputs are measured one at a time with one input transition per measurement. All parameters and waveforms are not applicable to all devices. Figure 6-1. Load Circuit and Voltage Waveforms Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 7 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 7 Detailed Description 7.1 Functional Block Diagram 7.2 Device Functional Modes Table 7-1. Function Table (Each Inverter) INPUT A 8 OUTPUT Y H L L H Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 SN54AHC04, SN74AHC04 www.ti.com SCLS231P – OCTOBER 1995 – REVISED JUNE 2023 8 Device and Documentation Support 8.1 Documentation Support (Analog) 8.1.1 Related Documentation The table below lists quick access links. Categories include technical documents, support and community resources, tools and software, and quick access to sample or buy. Table 8-1. Related Links PARTS PRODUCT FOLDER SAMPLE & BUY TECHNICAL DOCUMENTS TOOLS & SOFTWARE SUPPORT & COMMUNITY SN54AHC04 Click here Click here Click here Click here Click here SN74AHC04 Click here Click here Click here Click here Click here 8.2 Receiving Notification of Documentation Updates To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on Subscribe to updates to register and receive a weekly digest of any product information that has changed. For change details, review the revision history included in any revised document. 8.3 Support Resources TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight from the experts. Search existing answers or ask your own question to get the quick design help you need. Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. 8.4 Trademarks TI E2E™ is a trademark of Texas Instruments. All trademarks are the property of their respective owners. 8.5 Electrostatic Discharge Caution This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 8.6 Glossary TI Glossary This glossary lists and explains terms, acronyms, and definitions. 9 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: SN54AHC04 SN74AHC04 9 PACKAGE OPTION ADDENDUM www.ti.com 2-Dec-2023 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-9680501Q2A ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629680501Q2A SNJ54AHC 04FK 5962-9680501QCA ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QC A SNJ54AHC04J 5962-9680501QDA ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QD A SNJ54AHC04W SN74AHC04BQAR ACTIVE WQFN BQA 14 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04DGVR ACTIVE TVSOP DGV 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04DRG4 LIFEBUY SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 SN74AHC04N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 125 SN74AHC04N Samples SN74AHC04NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04PWRG4 LIFEBUY TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 SN74AHC04RGYR ACTIVE VQFN RGY 14 3000 RoHS & Green NIPDAU Level-2-260C-1 YEAR -40 to 125 HA04 SNJ54AHC04FK ACTIVE LCCC FK 20 55 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629680501Q2A SNJ54AHC 04FK SNJ54AHC04J ACTIVE CDIP J 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QC A SNJ54AHC04J SNJ54AHC04W ACTIVE CFP W 14 25 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QD A Addendum-Page 1 Samples Samples Samples Samples Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 2-Dec-2023 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking (4/5) (6) SNJ54AHC04W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of