7208SY9V3BE

7000 Series Miniature Toggle Switches Features/Benefits • Multi-pole and multi-position • Wide variety of actuator and termination options • Epoxy terminal-seal compatible with Typical Applications • Telecommunications • Instrumentation • Medical equipment bottom wash cleaning • RoHS compliant models available Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page F-15 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). For materials see page F-5. NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–5 thru F–17. For additional options not shown in catalog, consult our Customer Service Center. Switch Function 7101 SP On-None-On 7103 SP On-Off-On 7105 SP Mom.-Off-Mom. 7107 SP On-Off-Mom. 7108 SP On-None-Mom. 7109 SP None-On-Mom. 7201 DP On-None-On 7203 DP On-Off-On 7205 DP Mom.-Off-Mom. 7207 DP On-Off-Mom. 7208 DP On-None-Mom. 7211 DP On-On-On 7213 DP On-On-Mom. 7215 DP Mom.-On-Mom. 7301 3P On-None-On 7303 3P On-Off-On 7305 3P Mom.-Off-Mom. 7308 3P On-None-Mom. 7401 4P On-None-On 7403 4P On-Off-On 7405 4P Mom.-Off-Mom. 7408 4P On-None-Mom. 7411 4P On-On-On 7413 4P On-On-Mom. 7415 4P Mom.-On-Mom. Note: UL models available, see pages F-4 & F-5. Actuator M .200” high P3  Flatted, anti-rotation, .450” high S .420” high T  .687” high, 15/32 bushing K2 Locking lever, .704” high K9 Locking lever, .704” high K12 Locking lever, .732” high K19 Locking lever, .732” high L .840” high L1 .640” high L1P Anti-rotation, .640” high L2 .550” high L2P Anti-rotation, .550” high L3 Plastic .940” inch L40 Lever handle without cap L41 .531” high lever handle with cap L42 .838” high lever handle with cap MP Anti-rotation, .200” high P1 Flatted, anti-rotation, .840” high P4 Flatted, anti-rotation, .250” high SP Anti-rotation, .420” high T1 .487” high, 15/32 bushing T1P Anti-rotation, .487” high, 15/32 bushing T2P Flatted, anti-rotation, .610” high, 15/32 bushing, TP Anti-rotation, .687” high, 15/32 bushing Bushing D .280 high, keyway H .296 high, flat Y .350 high, keyway NONE No bushing choice required CW Splashproof D8 .280” high, flat D9 .280” high, keyway H3 .315” high, keyway H4 8mm high, keyway Y1 .378” high, keyway Y3 8.9mm high, keyway Y4 .378” high, flat Y9 .350” high, keyway Contact Material B Gold Seal P Gold, matte-tin E Epoxy Q Silver I Epoxy potted S Silver, matte-tin base G Gold over silver R Gold over silver, matte-tin Actuator Color/Finish NONE Bright chrome 2 Black 3 Red S Satin chrome Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–3 www.ckswitches.com F Toggle Terminations A Right angle, PC thru-hole KXX Actuator Color/Finish AV2 Vert. right angle, PC thru-hole NONE Natural aluminum C PC Thru-hole 2 Black anodized aluminum V3 .460 high, V-bracket 3 Red anodized aluminum Z Solder lug 7 Blue anodized aluminum A2 Right angle, PC thru-hole G Grip tip aluminum A3 Right angle, PC thru-hole A4 Right angle, PC thru-hole Bushing Finish AW1 Right angle, extended, PC thru-hole NONE Nickel on all AW4 Right angle, extended, PC thru-hole bushings (except D8, V2 .555” high, V-bracket satin chrome) V4 .630” high, V-bracket 2 Black V6 .460” high, V-bracket V7 .630” high, V-bracket V8 .953” high, V-bracket W .750” long, wire wrap V9 1.150” high, V-bracket V21 .555” high, snap-in V-bracket W1 .964” long, wire wrap V31 .460” high, snap-in V-bracket W3 .425” long, wire wrap V41 .630” high, snap-in V-bracket W4 1.062” long, wire wrap W5 1.305” long, wire wrap V71 .630” high, snap-in V-bracket Z3 Quick connect V81 .953” high, snap-in V-bracket 7000 Series Miniature Toggle Switches Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Brass, chrome plated. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page F-15 for additional contact materials. CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See above for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SWITCH FUNCTION SWITCH FUNCTION NO. POLES SP MODEL NO. CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 ON NONE ON 2-3 N/A 2-1 2-3 OPEN 2-1 UL** MODEL NO. SCHEMATIC 7101 U11 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 7107 U17 ON OFF MOM. 7108 U18 ON NONE MOM. 2-3 N/A 2-1 7109 U19 NONE ON MOM. N/A 2-3 2-1 SPDT SPDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7101SYZBE DP 7201 U21 7203 7205 ON NONE ON U23 ON OFF ON U25 MOM. OFF MOM. 7207 U27 ON OFF MOM. 7208 U28 ON NONE MOM. 7211 * U211 * ON ON ON 7213 * U213 * ON ON MOM. 7215 * U215 * MOM. ON MOM. 2-3,5-6 N/A 2-1,5-4 2-3,5-6 OPEN 2-1,5-4 2-3,5-6 N/A 2-1,5-4 2-3,5-6 2-3,5-4 2-1,5-4 DPDT DPDT 1/4-40 UNS-2A KEYWAY Toggle F Terminal Numbers For Reference Only Part number shown: 7201SYZQE MOM. = Momentary ** Wiringforfor 3-way switch * Wiring 3-way switch, see Section N. ** U11–U415 model nos. with all options when ordered with G, R, Q or S contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–4 www.ckswitches.com 7000 Series Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES 3P MODEL NO. UL** MODEL NO. 7301 U31 7303 7305 POS. 1 CONNECTED TERMINALS POS. 2 POS. 3 2-3,5-6,8-9 N/A 2-1,5-4,8-7 2-3,5-6,8-9 OPEN 2-1,5-4,8-7 2-3,5-6,8-9 N/A 2-1,5-4,8-7 SCHEMATIC ON NONE ON U33 ON OFF ON U35 MOM. OFF MOM. 7307 U37 ON OFF MOM. 7308 U38 ON NONE MOM. 3PDT 3PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7301SYZQE 4P 7401 U41 7403 U43 ON OFF ON 7405 U45 MOM. OFF 7408 U48 ON 7411* U411* ON 7413* U413* ON ON MOM. 7415* U415* MOM. ON MOM. ON NONE ON 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 MOM. 2-3,5-6,8-9,11-12 OPEN 2-1,5-4,8-7,11-10 NONE MOM. 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 ON ON 2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10 4PDT 4PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7401SYZQE MOM. = Momentary Wiring 3-way switch * ** Wiring for for 3-way switch, see Section N. ** U11–U415 model nos. with all options when ordered with G, Q, R or S contact material. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–5 www.ckswitches.com 7000 Series Miniature Toggle Switches ACTUATOR FINISH ACTUATOR S  .4206” HIGH 1 SP  ANTIROTATION, .4206” HIGH 2,3 ACTUATOR M  .2006” HIGH 1 MP  ANTIROTATION, .2006” HIGH 2,3 L, L1, L2  .8406”, .6406”, .5506” HIGH 1 L1P, L2P  ANTIROTATION, .8406”, .6406”, .5506” HIGH 2,3 * * OPTION CODE *DIM. ‘A’ S actuator standard when ordered with C, W-W5, Z & Z3 terminations. Caps are available separately, see page F-16. M actuator standard when ordered with all terminations except C, W-W5, Z & Z3. Caps are available separately, see page F-16. *P1  FLATTED WITH ANTIROTATION, .8406” HIGH 2,3 *P3  FLATTED WITH ANTIROTATION, DIM ‘A’ L .840 (21,34) L1, L1P .640 (16,26) L2, L2P .550 (13,97) Caps are available separately, see page F-16. *P4  FLATTED WITH ANTIROTATION, .2506” HIGH .4506” HIGH 2,3 2,3 * * * *Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.) T  .687 (17,45)6 HIGH 1,2 TP  ANTIROTATION, .687 (17,45) HIGH, T1  .487 (12,37)6 HIGH 1,2 T1P  ANTIROTATION, .487 (12,37) HIGH, 15/32 BUSHING 1,2,3 .687 (17,45) T2P  FLATTED, ANTIROTATION, .6106” HIGH, 15/32 BUSHING 1,2,3 15/32 BUSHING 1,2,3 .487 (12,37) 15/32-32 UNS-2A 15/32-32 UNS-2A 15/32-32 UNS-2A .448 (11,38) Bushing option code not required unless CW splashproof bushing ordered. TP & T1P actuators not available with CW splashproof bushing. All TXX actuators not available on single pole models with A-A4, AW1-AW4 terminations. 1 L, L1, L2, M, S & TXX actuators not available Toggle F OPTION CODE with Y1 bushing. 2 L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not available with D8 & H4 bushing. 3 Antirotation: Provides anti-‘push-in’ feature on actuator. Bushing option code not required. T2P actuator not available with CW splashproof bushing or single pole models with A-A4, AW1-AW4 terminations. ACTUATOR FINISH NONE 2 BLACK S SATIN CHROME NOTE: Black hardware is supplied when either black actuators or bushings are specified. For additional hardware, see Technical Data. BRIGHT CHROME-With Nickel Plated Bushing * Add .070 (1,78) for D, D8 & D9 bushings, subtract .020 (0,51) for H3 bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–6 www.ckswitches.com 7000 Series Miniature Toggle Switches ACTUATOR FINISH/COLOR ACTUATOR ACTUATOR K2  LOCKING LEVER, .704” HIGH K12  LOCKING LEVER, .732” HIGH K9  LOCKING LEVER, .704” HIGH K19  LOCKING LEVER, .732” HIGH (threaded) (threaded) (unthreaded) (unthreaded) * * Replaces K, K8 Replaces K1, K18 OPTION CODE ACTUATOR CAP FINISH NONE NATURAL ALUMINUM-With Nickle Plated Bushing Locking Positions 2 BLACK ANODIZED ALUMINUM 3 RED ANODIZED ALUMINUM 7 BLUE ANODIZED ALUMINUM G GRIP TIP ALUMINUM * All KXX models including KXXCW have a keyway NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. –01 Models 2 Position lock –03 & –11 Models 3 Position lock –05, –09 & –15 Models 1 Position lock L40  LEVER HANDLE WITHOUT CAP –07 & –13 Models 2 Position lock Locking levers supplied with bushing shown. –08 Models 1 Position lock Bushing option code not required unless CW splashproof bushing ordered. L41  PLASTIC LEVER HANDLE WITH L42  PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP, P/N 4810 ANTIROTATION AND CAP, P/N 4811 Finish: Matte (L41 & L42). No color choice required. L3  PLASTIC .940” HIGH Gloss Plastic * OPTION CODE PLASTIC ACTUATOR COLORS NONE No Actuator Color (L40 option) 2 BLACK 3 RED F Chrome Finish * Add .070 (1,78) for D, D8 & D9 bushings, subtract .020 (0,51) for H3 bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–7 www.ckswitches.com Toggle NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability, order L40 actuator option and lever handles separately, see page F-16. L4X actuators not available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator. 7000 Series Miniature Toggle Switches BUSHING FINISH BUSHING Y  .350” HIGH, NONE  NO BUSHING THREADED, KEYWAY Y9  .350” HIGH, BUSHING D  .280” HIGH, H  .296” HIGH, FLAT THREADED, KEYWAY THREADED, HIGH TORQUE 1,2 D8  .280” HIGH, UNTHREADED, H3  .315” HIGH, KEYWAY THREADED, HIGH TORQUE 1,2 FLAT 3 UNTHREADED, KEYWAY D9  .280” HIGH, UNTHREADED, KEYWAY No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). D8 1/4-40 UNS-2A D, D9 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A D9 bushing standard with all terminations except C, W-W5, Z or Z3. Add .070 (1,78) to all actuators lengths with D, D8 & D9 bushings. Y bushing standard with C, W-W5, Z or Z3 terminations. H4  8mm HIGH, KEYWAY, THREADED, METRIC HIGH TORQUE 1,2,3 Y1  .378” HIGH, KEYWAY, THREADED, HIGH TORQUE 1,2,4 Subtract .020 (0,51) from all actuator lengths for H3 bushing. Y3  8.9mm HIGH, KEYWAY, Y4  .378” HIGH, FLAT, THREADED, HIGH TORQUE 1,2,5 THREADED, METRIC 1/4-40 UNS-2A 1/4-40 UNS-2A CW  THREADED, SPLASHPROOF 1,2 For T & T1 actuators. For actuators other than T, T1 and KXX. OPTION CODE BUSHING FINISH NICKEL on all bushings NONE  except ‘D8’ satin chrome. 15/32-32 UNS-2A 1/4-40 UNS-2A 2 BLACK ­1 Will withstand 12 in.-lbs. of torque with no distortion. 2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models with A4 terminations. 3 D8 & H4 bushings available only with L, L1, L2, M & S actuators. 4 Y1 bushing available only with LXP, MP, PX & SP actuators. IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal standard. External bushing seal available separately from APM Hexseal, part # MFS-60064. 5 Y4 bushing not available with L4X actuators. IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal and external bushing seal washer standard. IP65 degree of protection for LXP, MP, PX or SP with CW option. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Black hardware is supplied when either black bushings or actuators are specified. Optional mounting nut and locking ring styles and finishes available. PANEL MOUNTING 1/4 INCH BUSHING METRIC BUSHING 15/32 INCH BUSHING Toggle F Without locking ring. With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without lockingring. With standard locking ring. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–8 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING .030 (0,76) Thk. SPDT thru 4PDT SPDT thru 4PDT Not available with P, R or S contact materials. Z3  QUICK CONNECT W, W1, W3, W4, W5  WIRE WRAP Dim 'A' .030 (0,76) Thk. SPDT thru 4PDT OPTION CODE DIM ‘A’ W .750 (19,05) W1 .964 (24,48) W3 .425 (10,80) W4 1.062 (26,97) W5 1.305 (33,15) .030 (0,76) Thk. Not available with P, R or S contact materials. Mating quick connector available, order part number 530100000, page F-16. SPDT thru 4PDT A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A Terminal Nos. For Reference Only 7101MD9ABE Horizontal Actuation SPDT Switch supportwith CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Part No. Shown: 7101MHABE A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4  RIGHT ANGLE, EXTENDED, PC MOUNTING PC THRU-HOLE Dim 'A' OPTION CODE DIM ‘A’ AW1 .72 (18,3) AW4 .83 (21,1) F Toggle Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–9 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE 7201MD9ABE Actuator Shown In Pos. 1 Horizontal Actuation Terminals & Support SECTION A-A DPDT A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING DIM 'A' OPTION CODE DIM ‘A’ AW1 .40 (10,2) AW4 .50 (12,7) .33 (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. A  RIGHT ANGLE, PC THRU-HOLE 7301MD9ABE Horizontal Actuation 3PDT Actuator Shown In Pos. 1 Terminals & Support SECTION A-A AW4  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .18 (4,6) Toggle F .33 TYP. (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–10 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS A2  RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .156” PITCH 7101MHA2BE Terminals & Support Horizontal Actuation Actuator Shown In Pos. 1 SPDT Switch supportwith CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Part No. Shown: 7101MHA2BE A4  RIGHT ANGLE, PC THRU-HOLE .156” PITCH PC MOUNTING 7101MD9A4BE Horizontal Actuation SPDT Actuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings, and I seal. Terminal bend radii and lead-in manufacturing option. NOTE: The A4 option is available with any contact material and can be UL recognized and CSA certified. The PC pattern must clear switch support legs. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .150” PITCH 7101MD9AV2BE Horizontal Actuation Actuator Shown In Pos. 1 SPDT SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .150” PITCH 7201MD9AV2BE Vertical Actuation DPDT F Toggle SECTION A-A Actuator Shown In Pos. 1 Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–11 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7301MD9AV2BE Vertical Actuation Actuator Shown In Pos. 1 3PDT SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7401MD9AV2BE Vertical Actuation 4PDT Actuator Shown In Pos. 1 SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7101MD9__BE Snap-In OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) .460 (11,68) SPDT Actuator Shown In Pos. 1 Not available with I seal option. V7, V71 .630 (16,00) V8, V81 .953 (24,21) Toggle F V6 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–12 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V61, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ Snap-In Actuator Shown In Pos. 1 Not available with I seal option. OPTION CODE DIM ‘A’ 7201MD9__BE V2, V21 .555 (14,10) DPDT V6, V61 .460 (11,68) V7, V71 .630 (16,00) V8, V81 .953 (24,21) V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7301MD9__BE 3PDT Snap-In Actuator Shown In Pos. 1 OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V7, V71 .630 (16,00) V8, V81 .953 (24,21) Not available with I seal option. V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ Snap-In DIM ‘A’ V2, V21 .555 (14,10) V7, V71 .630 (16,00) V8, V81 .953 (24,21) 7401MD9__BE 4PDT Not available with I seal option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–13 F Toggle Actuator Shown In Pos. 1 OPTION CODE www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS V3, V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V31, V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ Snap-In 7101MD9__BE SPDT OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4, V41 .630 (16,00) V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with I seal option. V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31, V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7201MD9__BE DPDT Snap-In Actuator Shown In Pos. 1 Not available with I seal option. V4, V9  VERTICAL MOUNT, V-BRACKET V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4, V41 .630 (16,00) V9 1.150 (29,21) PC MOUNTING Dim ‘A’ 7301MD9__BE 3PDT Toggle F Snap-In Actuator Shown In Pos. 1 OPTION CODE DIM ‘A’ V4, V41 .630 (16,00) V9 1.150 (29,21) Not available with I seal option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–14 www.ckswitches.com 7000 Series Miniature Toggle Switches TERMINATIONS V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim 'A' 7401MD9__BE 4PDT Snap-In OPTION CODE Actuator Shown In Pos. 1 Not available with I seal option. DIM ‘A’ V4, V41 .630 (16,00) V9 1.150 (29,21) CONTACT MATERIAL OPTION CODE B CONTACT MATERIAL GOLD 1 P Q S G R SILVER 4,5 TERMINAL PLATING GOLD 1 MATTE-TIN 6 RATINGS LOW LEVEL/ DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. SILVER 5 MATTE-TIN 6 GOLD OVER GOLD 3 SILVER 2,3 MATTE-TIN 6 POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. U11-U415 model numbers S, R, or Q contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. with all options when ordered with G, B contact material standard with all terminations except C, Z & Z3. 4 END CONTACTS: Coin silver, silver plated. Q contact material standard with C, Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. P, S & R contact materials not available with Z & Z3 terminations. 6 TERMINALS: Copper alloy, with matte tin alloy nickel plate. F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–15 www.ckswitches.com 7000 Series Miniature Toggle Switches SEAL E  EPOXY SEAL I  EPOXY POTTED BASE NO. POLES DIM ‘A’ SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) .505 (12,83) Dim. 'A' Compatible with “bottom-wash” PC board cleaning methods. 4P Available with C, W-W5, Z & Z3 terminations only. AVAILABLE HARDWARE Cap Cap Cap .383 (9,73) PART NO. PART NO. PART NO. 896801000 WHITE 896802000 BLACK 896803000 RED 763701000 WHITE 763702000 BLACK 763703000 RED 706201000 WHITE 706202000 BLACK 706203000 RED Material: Polyethylene Finish: Matte Material: Vinyl Finish: Matte Material: Vinyl Finish: Matte L41 Lever handle L42 Lever handle Fits Z3 Termination female connector .477 (12,12) .777 (19,74) PART NO. PART NO. PART NO. 481001000 WHITE 481002263 BLACK 481003000 RED 481101000 WHITE 481102263 BLACK 481103000 RED 530100000 Material: Nylon Finish: Matte Material: Nylon Finish: Matte 759D02000 Sealing Boot 703D02000 Sealing Boot NOTE: For use with S actuator style when combined with D, H, H3, Y, and Y4 bushings Other colors available, consult Customer Service Center. 704D02000 Sealing Boot 16 [0.630] ø 2 [0.079] ø .331 (8,4) .464 (11,79) .945 (24,0) .658 (16,7) Toggle .524 (13,3) 1/4-40 uns-2A nut NOTE: Additional nuts, locking rings and lockwashers available separately. Available in loose pieces. .657 (16,7) .204 (5,2) F .312 (7,92) .687 (17,45) 15/32-32 NS-2A NOTE: For use with T and TP style actuators. Cannot be used for Switch Functions: 7103, 7203, 7303, 7403, 7107, 7207, 7307, 7407. 15/32-32, NS-2A NOTE: For use with T, TP and T2P style actuators. Cannot be used for Switch Functions: 7103, 7203, 7303, 7403, 7107, 7207, 7307, and 7407. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 15 Jan 21 F–16 www.ckswitches.com