SIL10E-05S1V5-VJ

SIL10E Series DC-DC CONVERTERS • • • • • • • E Class Non-isolated 3.0 Vin to 5.5 Vin single output 1 NEW Product 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out • Available RoHS compliant The SIL10E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5 V or a 3.3 V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10 A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 96%. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated 2 YEAR WARRANTY SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 0 to 20MHz BW Temperature co-efficient Transient response Fixed output versions 5 Vin with wide trim 3.3 Vin with wide trim ±10% 0.8-3.63 Vdc 0.8-2.75 Vdc ±0.4% ±0.2% ±1.0% 0A None 50 mV pk-pk 25 mV rms max. ±0.01%/ºC 50 mV max. deviation 50 µs recovery to within ±1.0% 10% Vo compensation EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions (vertical version) Pin length Weight MTBF Telcordia SR-332 MIL-HDBK-217F (LxWxH) Fixed See table Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 50.8 x 7.8 x 12.7 mm 2.0 x 0.31 x 0.5 inches (Vertical) 0.135 ±0.02 in (3.43 ±0.5 mm) 5 g (0.18 oz) 7,042,000 hours 680,000 hours Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input current ripple Remote ON/OFF Start-up time International Safety Standard Approvals No load 3.0-5.5 Vdc 70 mA 8 A max. @ Io max. and Vout = 3.3 V 65 mA rms (See Note 2) 20 ms PROTECTION Short-circuit Thermal Continuous Automatic recovery ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 3) Operating ambient, temperature Non-operating -40 ºC to +100 ºC -40 ºC to +125 ºC UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 037 CB Report and Certificate to IEC60950, Certificate No. DE3-51686M1 File Name: sil10e_05.pdf Rev (04): 16 Dec 2005 SIL10E Series DC-DC CONVERTERS E Class Non-isolated2 OUTPUT POWER (MAX.) 8.8 W 11 W 13.2 W 16.5 W 19.8 W 22 W 27.5 W 36.3 W 36.3 W INPUT VOLTAGE 3.-5.5 V 3.0-5.5 V 3.0-5.5 V 3.0-5.5 V 3.0-5.5 V 3.0-5.5 V 3.0-5.5 V 4.5-5.5 V 4.5-5.5 V OUTPUT VOLTAGE 0.8 V 1V 1.2 V 1.5 V 1.8 V 2V 2.5 V 3.3 V 0.8-3.63 V 3.0 Vin to 5.5 Vin single output NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A 0A 0A 0A 0A 0A 0A 0A 0A OUTPUT CURRENT (MAX.) 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A 10 A EFFICIENCY (TYP.) 83% 86% 88% 90% 92% 93% 94% 95% 95% REGULATION LINE ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% LOAD ±1.5% ±1.5% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% MODEL NUMBER (4,5,6) SIL10E-05S0V8-VJ SIL10E-05S1V0-VJ SIL10E-05S1V2-VJ SIL10E-05S1V5-VJ SIL10E-05S1V8-VJ SIL10E-05S2V0-VJ SIL10E-05S2V5-VJ SIL10E-05S3V3-VJ SIL10E-05W3V3-VJ Part Number System with Options SIL10E-05S3V3-VJ Packaging Options (5) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical Mount H = Horizontal Mount Output Voltage 2.5 V, 3.3 V etc Number of Outputs S = Single W = Wide Product Family SIL = Single In Line Rated Output Current 10 = 10 Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0 V to 5.5 V 12 = 10 V to 14 V OutputtpVolVagte ge jAdjusemeof thetheLSIL10E-05x SeriJ s eries O u ut t ol a Ad ustm t nt nt of SI 10-05WxxW3V3e S The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdcto 3.63 Vdc. When the SIL10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3 V. • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc • When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc Notes 1 2 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 V to 3.6 V. When Vin < 4.5 V, then Vout can be adjusted from 0.8 V to 2.75 V. The SIL10E features a ‘Negative Logic’ Remote ON/OFF operation. If you are not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL10E: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high [Von/off >1.2 V] Converter Operation Unit is ON Unit is ON Unit is OFF Notes Cond. 3 4 5 6 Full derating curves available in both the Longform Datasheet and Application Note 136. For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02J. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ towards the end of the model number e.g. SIL10E-05S3V3-VRJ. File Name: sil10e_05.pdf Rev (04): 16 Dec 2005 SIL10E Series DC-DC CONVERTERS E Class Non-isolated 3.0 Vin to 5.5 Vin single output 3 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm PIN VIEW 2.000 ±0.020 (50.80 ±0.50) SIDE VIEW PCB 0.500 (12.70) 0.025 ± 0.001 (0.64 ±0.02) 6 5 3 J2 2 1 5 43 J1 2 1 J1 PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 FUNCTION +Vout +Vout Remote Sense (+) +Vout Ground J2 PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FUNCTION Ground +Vin +Vin No Pin Trim Remote ON/OFF 0.316 ±0.008 (8.03 ±0.20) 0.170 (4.32) 0.100 (2.54) 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 1: Mechanical Drawing - Horizontal Mount Version SIDE VIEW 0.307 ±0.008 (7.80 ±0.20) PCB FRONT VIEW 2.000 ±0.020 (50.80 ±0.50) 0.500 (12.70) 0.135 (3.43) 0.635 (16.13) 1 2 3 J1 4 5 1 0.025 ± 0.001 (0.64 ±0.02) 2 3 J2 5 6 0.168 (4.26) 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items:  Application Note  Longform Datasheet www.artesyn.com File Name: sil10e_05.pdf Rev (04): 16 Dec 2005