OM1326NMM

OM1326SMM OM1326NMM OM1326NKM OM1326NTM OM1326STM OM1326N2M 1.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703407 Three Terminal, Precision Adjustable Positive Voltage Regulator In Hermetic Style Packages (LM117AHV) Please see mechanical outlines herein FEATURES • • • • • • Similar To Industry Standard LM117AHV Approved To DESC Standardized Military Drawing Number 7703407 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles Maximum Output Voltage Tolerance Is Guaranteed to + 1% DESCRIPTION These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from 1.2 volts to 57 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25°C Power Dissipation Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 57 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 61.25 VDC 4 11 R2 Supersedes 1 07 R1 3.5 3.5 - 25 OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M ELECTRICAL CHARACTERISTICS Parameter Reference Voltage Symbol VREF -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM Test Conditions VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Line Regulation (Note 1) RLINE 3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref 40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C 40V ≤ VDIFF ≤ 60V, Vout = Vref Load Regulation (Note 1) RLOAD VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 195mA VDIFF = 60V, 10mA ≤ IL ≤ 30mA Thermal Regulation VRTH Vin = 14.6V, IL = 1.5A Pd = 20 Watts, t = 20 ms, TA = 25°C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 µF, Iout = 100 mA VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Adjustment Pin Current Change ∆IAdj VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 195mA 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V 3.3V ≤ VDIFF ≤ 60V Miminum Load Current ILmin VDIFF = 3.0V, Vout = 1.4V (forced) VDIFF = 3.3V, Vout = 1.4V (forced) VDIFF = 40V, Vout = 1.4V (forced) VDIFF = 60V, Vout = 1.4V (forced) Current Limit (Note 2) ICL VDIFF = 5V VDIFF = 40V, TA = 25°C VDIFF = 60V, TA = 25°C • 100 Min. 1.238 Max. 1.262 1.270 1.270 1.270 4.5 -9 5 10 15 15 15 15 15 5 mV mV mV V Unit • • • • • • • • 1.225 1.225 1.225 -4.5 -9 -5 -10 -15 -15 -15 -15 -15 -5 • 66 dB • • • -5 100 100 100 5 5 5 5 5 5 5 5.0 µA • -5 -5 -5 -5 µA • • • • • • -5 -5 5.0 5.0 7.0 1.5 0.3 0.05 3.5 1.5 0.50 mA A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range. 3.5 7703407M 7703407U 7703407T 7703407Y 7703407N 77034072 PART NUMBER DESIGNATOR Standard Military Drawing Number Omnirel Part Number OM1326SMM OM1326STM OM1326NTM OM1326NKM OM1326NMM OM1326N2M Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 3.5 - 26 OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M ELECTRICAL CHARACTERISTICS OM1326N2M Parameter Reference Voltage Symbol VREF -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) Min. 1.238 Max. 1.262 1.270 1.270 1.270 4.5 -9 5 10 15 15 15 15 15 2 mV mV mV V Unit Test Conditions VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V VDIFF = 60V • • • • • • • • 1.225 1.225 1.225 -4.5 -9 -5 -10 -15 -15 -15 -15 -15 -2 Line Regulation (Note 1) RLINE 3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref 40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C 40V ≤ VDIFF ≤ 60V, Vout = Vref Load Regulation (Note 1) RLOAD VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100 mA VDIFF = 60V, 10mA ≤ IL ≤ 20 mA Thermal Regulation VRTH Vin = 14.6V, IL = 300 mA Pd = 4.0 Watts, t = 20 ms, TA = 25°C Ripple Rejection (Note 2) Adjustment Pin Current RN f = 120 Hz, Vout = Vref CAdj = 10 µF, Iout = 100 mA • 66 dB IAdj VDIFF = 3.0V, TA = 25°C VDIFF = 3.3V VDIFF = 40V VDIFF = 60V 100 • • • -5 100 100 100 5 5 5 5 5 5 5 5.0 µA Adjustment Pin Current Change ∆IAdj VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤500 mA VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100 mA 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V 3.3V ≤ VDIFF ≤ 60V • • -5 -5 -5 -5 µA • • • • • • -5 -5 Miminum Load Current ILmin VDIFF = 3.0V, Vout = 1.4V (forced) VDIFF = 3.3V, Vout = 1.4V (forced) VDIFF = 40V, Vout = 1.4V (forced) VDIFF = 60V, Vout = 1.4V (forced) 5.0 5.0 7.0 0.5 0.15 0.02 1.65 0.65 0.28 mA Current Limit (Note 2) ICL VDIFF = 5V VDIFF = 40V, TA = 25°C VDIFF = 60V, TA = 25°C A Notes: Please see page 34. STANDARD APPLICATION * Cin is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability, however it does improve transient response. R Vout = 1.25 V (1 + 2 )+ IAd j R2 R1 Since IAdj is controlled to less than 100 µA, the error associated with this term is negligible in most applications. Vin OM1326STM R1 240Ω IAdj Cin* 0.1 µF R2 Adjust Co** 1.0 µF Vout 3.5 3.5 - 27 OM1326NTM, OM1326STM, OM1326NKM, OM1326SMM, OM1326NMM, OM1326N2M MECHANICAL OUTLINE .425 .420 .410 .200 .190 .045 .035 .665 .645 .537 .527 1 .100 .200 3 2 .035 WIDE FLAT 3 PLCS. .425 .150 .140 .350 MIN. 123 .430 .410 .020 ± .020 .115 .160 .080 .038 MAX. OM1326SMM .750 .500 .005 .035 .025 .100 TYP. .120 TYP. Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Case - Isolated OM1326STM Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Isolated OM1326NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Output .140 .015 .075 .157 .140 .140 .075 1 1 2 2 .030 MIN. .415 3 3 .062 .375 OM1326NMM Pin 1 - Adjust Pin 2 - Input Pin 3 - Output 1.53 REF. 0.875 MAX. 0.135 MAX. 0.450 0.250 0.312 MIN. SEATING PLANE 0.043 0.038 2 PLCS. 0.225 0.205 0.161 0.151 1.197 1.177 .065 .009 R. 20 PLCS. .020 X45° REF. (±.003) 0.188 R. MAX. 0.675 0.655 0.440 0.420 .040 4 .010 .075 (±.010) TYP. 9 2 1 .003 .025 TYP. .085 3 1 19 .160 SQ. REF. 13 18 14 0.525 R. MAX. .025 SQ. TYP. .050 (±.005) TYP. .050 TYP. .040 X45° REF (3 PL) OM1326N2M 3.5 OM1326NKM Pin 1 - Adjust Pin 2 - Input Case - Output Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 NC NC NC NC NC NC NC NC NC NC Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 VIN VOUT VOUT VOUT(Sense) NC NC NC ADJUST NC VIN For additional information please see the mechanical outline section.