IPB50N12S3L15ATMA1

IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 OptiMOS®-T Power-Transistor Product Summary VDS 120 V RDS(on),max (SMD version) 15.4 mW ID 50 A Features • OptiMOS™ - power MOSFET for automotive applications • N-channel - Enhancement mode • Automotive AEC Q101 qualified PG-TO263-3-2 PG-TO262-3-1 PG-TO220-3-1 • MSL1 up to 260°C peak reflow • 175°C operating temperature • Green product (RoHS compliant) • 100% Avalanche tested Type Package Marking IPB50N12S3L-15 PG-TO263-3-2 3N12L15 IPI50N12S3L-15 PG-TO262-3-1 3N12L15 IPP50N12S3L-15 PG-TO220-3-1 3N12L15 Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Continuous drain current ID Conditions T C=25 °C, V GS=10 V T C=100 °C, Value 50 V GS=10 V1) 37 Unit A Pulsed drain current1) I D,pulse T C=25 °C 200 Avalanche energy, single pulse1) E AS I D=25A 330 mJ Avalanche current, single pulse I AS - 50 A Gate source voltage V GS - ±20 V Power dissipation P tot T C=25 °C 100 W Operating and storage temperature T j, T stg - -55 ... +175 °C Rev. 1.0 page 1 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 Parameter Symbol Values Conditions Unit min. typ. max. Thermal characteristics1) Thermal resistance, junction - case R thJC - - - 1.5 Thermal resistance, junction ambient, leaded R thJA - - - 62 SMD version, device on PCB R thJA minimal footprint - - 62 6 cm2 cooling area2) - - 40 K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0V, I D= 1mA 120 - - Gate threshold voltage V GS(th) V DS=V GS, I D=60µA 1.2 1.7 2.4 Zero gate voltage drain current I DSS V DS=120V, V GS=0V, T j=25°C - 0.01 0.1 T j=125°C2) - 1 10 V DS=120V, V GS=0V, V µA Gate-source leakage current I GSS V GS=20V, V DS=0V - - 100 nA Drain-source on-state resistance R DS(on) V GS=4.5V, I D=50A - 16.1 20.9 mW V GS=4.5V, I D=50A, SMD version - 15.8 20.6 V GS=10V, I D=50A - 13.1 15.7 V GS=10V, I D=50A, SMD version - 12.8 15.4 Rev. 1.0 page 2 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 Parameter Symbol Values Conditions Unit min. typ. max. - 3215 4180 - 730 949 Dynamic characteristics1) Input capacitance C iss Output capacitance C oss Reverse transfer capacitance Crss - 63 95 Turn-on delay time t d(on) - 10 - Rise time tr - 5 - Turn-off delay time t d(off) - 28 - Fall time tf - 5 - Gate to source charge Q gs - 11 14 Gate to drain charge Q gd - 8 12 Gate charge total Qg - 44 57 Gate plateau voltage V plateau - 3.7 - V - - 50 A - - 200 0.6 1 1.2 V - 80 - ns - 185 - nC V GS=0V, V DS=25V, f =1MHz V DD=20 V, V GS=10 V, I D=50 A, R G=3.5 W pF ns Gate Charge Characteristics1) V DD=96V, I D=70A, V GS=0 to 10V nC Reverse Diode Diode continous forward current1) IS Diode pulse current1) I S,pulse Diode forward voltage V SD V GS=0 V, I F=50 A, T j=25 °C Reverse recovery time1) t rr V R=50V, I F=I S, di F/dt =100A/µs Reverse recovery charge1) Q rr 1) T C=25°C Defined by design. Not subject to production test. 2) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air Rev. 1.0 page 3 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 2 Drain current P tot = f(T C); V GS = 10 V I D = f(T C); V GS = 10 V; SMD 120 60 100 50 80 40 ID [A] Ptot [W] 1 Power dissipation 60 30 40 20 20 10 0 0 0 50 100 150 200 0 50 100 TC [°C] 150 200 TC [°C] 3 Safe operating area 4 Max. transient thermal impedance I D = f(V DS); T C = 25 °C; D = 0; SMD Z thJC = f(t p) parameter: t p parameter: D =t p/T 1000 101 1 µs 100 0.5 ZthJC [K/W] 10 µs 100 ID [A] 100 µs 0.1 10-1 0.05 0.01 1 ms 10 10-2 single pulse 10-3 1 0.1 1 10 100 1000 10-5 10-4 10-3 10-2 10-1 100 tp [s] VDS [V] Rev. 1.0 10-6 page 4 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 5 Typ. output characteristics 6 Typ. drain-source on-state resistance I D = f(V DS); T j = 25 °C; SMD R DS(on) = f(I D); T j = 25 °C; SMD parameter: V GS parameter: V GS 200 36 10 V 5V 180 3V 160 3.5 V 4.5 V 140 4V 28 RDS(on) [mΩ] ID [A] 120 100 4V 80 20 60 4.5 V 3.5 V 40 5V 20 3V 10 V 0 12 0 1 2 3 4 5 0 20 40 VDS [V] 60 80 100 ID [A] 7 Typ. transfer characteristics 8 Typ. drain-source on-state resistance I D = f(V GS); V DS = 6V R DS(on) = f(T j); I D = 50 A; V GS = 10 V; SMD parameter: T j 150 30 -55 °C 25 °C 25 175 °C ID [A] RDS(on) [mW] 100 20 15 50 10 0 1 2 3 4 5 VGS [V] Rev. 1.0 5 -60 -20 20 60 100 140 180 Tj [°C] page 5 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 9 Typ. gate threshold voltage 10 Typ. capacitances V GS(th) = f(T j); V GS = V DS C = f(V DS); V GS = 0 V; f = 1 MHz parameter: I D 104 2.5 Ciss 2 60 µA 1.5 VGS(th) [V] C [pF] 300 µA 103 Coss 1 102 Crss 0.5 101 0 -60 -20 20 60 100 140 0 180 5 10 15 20 25 30 VDS [V] Tj [°C] 11 Typical forward diode characteristics 12 Typ. avalanche characteristics IF = f(VSD) I A S= f(t AV) parameter: T j parameter: Tj(start) 100 103 25 °C 102 100 °C 10 IF [A] IAV [A] 150 °C 175 °C 101 25 °C 1 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 VSD [V] Rev. 1.0 0.1 0.1 1 10 100 1000 tAV [µs] page 6 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 13 Typical avalanche energy 14 Typ. drain-source breakdown voltage E AS = f(T j) V BR(DSS) = f(T j); I D = 1 mA parameter: I D 135 600 12.5 A 500 130 VBR(DSS) [V] EAS [mJ] 400 300 25 A 125 120 200 50 A 115 100 110 0 25 75 125 -55 175 -15 Tj [°C] 25 65 105 145 Tj [°C] 15 Typ. gate charge 16 Gate charge waveforms V GS = f(Q gate); I D = 50 A pulsed parameter: V DD 10 V GS 9 Qg 8 7 VGS [V] 6 24 V 96 V 5 V gs(th) 4 3 2 Q g(th) Q sw Q gate 1 Q gs 0 0 10 20 30 Q gd 40 Qgate [nC] Rev. 1.0 page 7 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2016 All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non‑infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.0 page 8 2016-06-20 IPB50N12S3L-15 IPI50N12S3L-15, IPP50N12S3L-15 Revision History Version Date Changes Revision 1.0 Rev. 1.0 20.06.2016 Final Data Sheet page 9 2016-06-20