IR44272LPBF
HVICTM
SOT-23 Gate Driver IC
Features
Product Summary
Wide VCC range (5V to 20V)
CMOS Schmitt-triggered inputs
Under voltage lockout
3.3V logic compatible
Enable input
Output in phase with inputs
Leadfree, RoHS compliant
Topology
General Driver
IO+/- (typical)
1.5A
Package Options
Typical Applications
General purpose gate driver
Industrial applications
Switched-mode power supplies
5 Lead SOT23
Typical Connection Diagram
5..18V
IN
VCC
1
IN
2
EN
3
ENABLE
IR44272
COM
5
OUT
4
Ordering Information
Standard Pack
Base Part Number
IR44272LPBF
1
Package Type
SOT23-5
www.infineon.com/gdlowside
Orderable Part Number
Form
Quantity
Tape and Reel
3000
© 2015 International Rectifier
IR44272LTRPBF
June 30, 2015
IR44272LPBF
Table of Contents
Page
Typical Connection Diagram
1
Ordering Information
1
Description
3
Qualification Information
4
Absolute Maximum Ratings
5
Recommended Operating Conditions
5
Static Electrical Characteristics
6
Dynamic Electrical Characteristics
6
Functional Block Diagrams
7
Input/Output Pin Equivalent Circuit Diagram
8
Lead Definitions
9
Lead Assignments
9
Timing Diagrams
10
Package Details: SOT23-5
11
Package Details: SOT23-5, Tape and Reel
12
Part Marking Information
14
2
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Description
The IR44272L is a low-voltage, wide VCC range, power MOSFET and IGBT non-inverting gate driver. Proprietary
latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with
standard CMOS or LSTTL output. The output driver features a current buffer stage. The design also includes an
enable input with internal pull up.
3
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Qualification Information
†
††
Qualification Level
Moisture Sensitivity Level
Machine Model
ESD
Human Body Model
IC Latch-Up Test
RoHS Compliant
†
††
†††
Industrial
Comments: This family of ICs has passed JEDEC’s
Industrial qualification. IR’s Consumer qualification level is
granted by extension of the higher Industrial level.
†††
MSL1 260°C
(per IPC/JEDEC J-STD-020)
Class B
(per JEDEC standard JESD22-A115)
Class 2
(per EIA/JEDEC standard EIA/JESD22-A114)
Class 1 Level A
(per JESD78)
Yes
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Higher qualification ratings may be available should the user have such requirements. Please contact your
International Rectifier sales representative for further information.
Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
4
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. The device
may not function or not be operable above the recommended operating conditions and stressing the parts to
these levels is not recommended. In addition, extended exposure to stresses above the recommended operating
conditions may affect device reliability. All voltage parameters are absolute voltages referenced to COM. The
thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Symbol
Definition
Min
Max
Units
VCC
Fixed supply voltage
-0.3
20
VO
Output voltage
-0.3
VCC + 0.3
VIN
Logic input voltage
-0.3
VCC + 0.3
Thermal resistance, junction to ambient
—
151
TJ
Junction temperature
—
150
TS
Storage temperature
-55
150
TL
Lead temperature (soldering, 10 seconds)
—
300
RthJA
V
°C/W
°C
Recommended Operating Conditions
For proper operation, the device should be used within the recommended conditions. All voltage parameters are
absolute voltages referenced to COM unless otherwise stated in the table.
Symbol
Definition
Min
Max
5.0
18
VCC
Fixed supply voltage
VO
Output voltage
0
VCC
VIN
Logic input voltage (IN and EN)
0
VCC
TA
Ambient temperature
-40
125
5
www.infineon.com/gdlowside
© 2015 International Rectifier
Units
V
°C
June 30, 2015
IR44272LPBF
Static Electrical Characteristics
VCC = 15V, TA = 25°C unless otherwise specified. The VIN, and IIN parameters are referenced to COM and are
applicable to input leads: IN. The VO and IO parameters are referenced to COM and are applicable to the output
leads: OUT.
Symbol
Definition
Min
Typ Max Units
Test Conditions
VCCUV+
Vcc supply UVLO positive going threshold
—
—
5.0
VCCUV-
Vcc supply UVLO negative going threshold
4.15
—
—
VCC UVH Vcc supply UVLO hysteresis
—
0.3
—
VCLAMP
Vcc Zener clamp voltage
—
21.4
—
VIL
Logic “0” input voltage (OUT = LO)
—
—
0.6
VIH
Logic “1” input voltage (OUT = HI)
2.7
—
—
VEN+
EN input rising threshold
—
2.5
—
VEN-
EN input falling threshold
—
0.8
—
VOH
High level output voltage, VBIAS -VO
—
—
2.0
IO = 0.1mA
VOL
Low level output voltage, VO
—
—
0.12
IO = 20mA
IIN+
Logic “1” input bias current
—
5
15
VIN = 5V
IIN-
Logic “0” input bias current
-30
-10
—
IQCC
Quiescent VCC supply current
—
—
400
IO+
Output high short circuit pulsed current
—
1.7
—
IO-
Output low short circuit pulsed current
—
1.5
—
ICC=5mA
V
µA
VIN = 0V
VIN = 0V or 5V
A
VO = 0V, VIN = 5V
VO = 15V, VIN = 0V
Dynamic Electrical Characteristics
VCC = 15V, TA = 25°C, and CL = 1000pF unless otherwise specified.
Symbol
Definition
Min
Typ Max Units
ton
Turn-on propagation delay
—
50
—
toff
Turn-off propagation delay
—
50
—
tr
Turn-on rise time
—
10
—
tf
Turn-off fall time
—
10
—
6
www.infineon.com/gdlowside
© 2015 International Rectifier
ns
Test Conditions
Figure 2
June 30, 2015
IR44272LPBF
Functional Block Diagram
VCC
VCC
EN
PREDRV
DRV
OUT
COM
UVLO
IN
7
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Input/Output Pin Equivalent Circuit Diagrams
VCC
VCC
ESD
Diode
ESD
Diode
OUT
IN
25V
RESD
ESD
Diode
RPD
COM
ESD
Diode
COM
VCC
RPU
ESD
Diode
EN
RESD
ESD
Diode
COM
8
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Lead Definitions
PIN
Symbol
Description
1
IN
2
COM
3
EN
4
OUT
Gate drive output
5
VCC
Supply Voltage
Logic input for gate driver output (OUT), in phase
Ground
Enable input
Lead Assignments
IN
VCC
1
2
EN
3
9
www.infineon.com/gdlowside
IR44272
COM
5
OUT
4
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Timing Diagrams
IN
EN
OUT
Figure 1: Input/output Timing Diagram
50%
50%
IN
tOFF
tRISE
tON
tFALL
90%
OUT
10%
90%
10%
Figure 2: Switching Time Waveform Definitions
10
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Package Details, SOT23-5
11
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Package details: SOT23-5, Tape and Reel
12
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Package details: SOT23-5, Tape and Reel
13
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
IR44272LPBF
Part Marking Information
Top Marking
Bottom Marking
J
IR Logo
Part no.
The information provided in this document is believed to be accurate and reliable. However, International
Rectifier assumes no responsibility for the consequences of the use of this information. International
Rectifier assumes no responsibility for any infringement of patents or of other rights of third parties which
may result from the use of this information. No license is granted by implication or otherwise under any
patent or patent rights of International Rectifier. The specifications mentioned in this document are subject
to change without notice. This document supersedes and replaces all information previously supplied.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101N Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
14
www.infineon.com/gdlowside
© 2015 International Rectifier
June 30, 2015
很抱歉,暂时无法提供与“IR44272LTRPBF”相匹配的价格&库存,您可以联系我们找货
免费人工找货