IRS25752LTRPBF

IRS25752LPBF µHVICTM SOT-23 High-Side Gate Driver IC Features • • • • • • • • • • • Description Package Options Applications • • • The IRS25752 is a high-side, single-channel gate driver IC with 600V blocking and levelshifting capability. This allows for the gate driver to be connected directly to the gate of a high-side power MOSFET, while being controlled by the low-side, ground potential circuitry. The IRS25752 includes a wide VCC supply range, UVLO protection, and excellent immunity to harsh dv/dt or –VS switching environments. IR’s HVIC technology allows for these functions and features to be realized in a 6-pin SOT-23 package. Floating gate driver designed for bootstrap operation Fully operational to +600 V Excellent dv/dt immunity Excellent negative VS transient immunity Wide VCC range UVLO on low-side and high-side Schmitt-trigger input with internal pull-down Output in phase with input Excellent latch immunity on all inputs & outputs RoHS compliant 6-pin SOT-23 package High-side gate driver control Pulse transformer replacement General purpose switched mode power electronics SOT23-6L Typical Connection Diagram 600V VCC 1 COM 2 IN IN 3 IRS25752 VCC VB 6 HO 5 VS 4 To Load Ordering Information Standard Pack Base Part Number Package Type IRS25752LPBF SOT-23-6L 1 Form Quantity Tape and Reel 3000 Orderable Part Number IRS25752LTRPBF January 4, 2017 IRS25752LPBF Table of Contents Page Description 1 Ordering Information 1 Typical Connection Diagram 1 Absolute Maximum Ratings 3 Recommended Operating Conditions 3 Electrical Characteristics 4 Functional Block Diagram 5 Timing Diagram 6 Lead Definitions 7 Lead Assignments 7 Package Details: 6L-SOT23 9 Tape and Reel Details: 6L-SOT23 10 Part Marking Information 12 Qualification Information 13 2 January 4, 2017 IRS25752LPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM, all currents are defined positive into any pin. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min Max -0.3 620 Units VB High side floating absolute voltage VS High side floating supply offset voltage VB - 20 VB + 0.3 VHO High side floating gate drive output voltage VS - 0.3 VB + 0.3 VCC Low side and logic fixed supply voltage -0.3 20 VIN Logic input voltage COM - 0.3 VCC + 0.3 VCC - 20 VCC + 0.3 --- 50 V/ns --- 151 ºC/W -55 150 --- 300 COM dVS/dt RΘJA Logic ground High side floating supply offset voltage slew rate Thermal resistance, junction to 6L-SOT-23 ambient TJ Junction temperature TS Storage temperature TL IC Pin temperature (soldering, 10 seconds) V ºC Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. Symbol VB Definition High side floating absolute voltage Min Max VS + 10 VS + 18 † VS High side floating supply offset voltage VHO High side floating gate drive output voltage VS VB VCC Low side and logic fixed supply voltage 10 18 VIN Logic input voltage COM VCC TJ Junction temperature -40 125 † COM - 8 Units 600 V ºC Logic operational for VS of -8V to +600V. Logic state held for VS of -8V to –VBS. 3 January 4, 2017 IRS25752LPBF Electrical Characteristics VCC=15V, VBS=15V, CL=1000pF, and TA = 25 °C unless otherwise specified. Symbol Definition Min Typ Max Units Test Conditions Low Side Characteristics VCCUV+ VCC supply UVLO positive-going 8.0 9.0 10.0 VCCUV- VCC supply UVLO negative-going 7.0 8.0 9.0 Quiescent VCC supply current --- 100 --- VCC internal Zener clamp voltage --- 20.4 --- VIH Logic “1” input voltage --- --- 2.2 VIL Logic “0” input voltage 0.8 --- --- IIN+ Logic “1” input bias current --- 20 40 IIN- Logic “0” input bias current --- --- 5 IQCC VCC_CLAMP V µA ICC = 5mA V µA VIN = VCC VIN = COM High Side Characteristics VBSUV+ VBS supply UVLO positive-going 8.0 9.0 10.0 VBSUV- VBS supply UVLO negative-going 7.0 8.0 9.0 VBS_CLAMP VBS internal Zener clamp voltage --- 20.4 --- VOH High level output voltage (VB – HO) --- 0.8 1.4 VOL Low level output voltage (HO – VS) --- 0.3 0.6 ILK Offset supply leakage current --- --- 50 IQBS Quiescent VBS supply current --- 80 --- V IBS = 5mA IO = 2mA µA VB = VS = 600V VIN = VCC or COM Gate Drive Characteristics tON Turn-on propagation delay --- 140 --- tOFF Turn-off propagation delay --- 215 --- tRISE Turn-on rise time --- 85 --- tFALL Turn-off fall time --- 40 --- IO+ HO gate drive output source current --- 160 --- IO- HO gate drive output sink current --- 240 --- 4 VS = 0V ns VS = 600V VS = 0V mA January 4, 2017 IRS25752LPBF Functional Block Diagram HV Well 6 VB UVLO Pulse Filter R Q R S 5 HO VCC 1 4 VS UVLO IN 3 Pulse Gen COM 2 5 January 4, 2017 IRS25752LPBF Timing Diagram IN 50% 50% tON tOFF tRISE tFALL 90% HO 6 10% 90% 10% January 4, 2017 IRS25752LPbF Pin Definitions Pin Symbol Description 1 VCC IC supply voltage 2 COM IC power and signal ground 3 IN Logic input 4 VS High side floating supply offset voltage 5 HO High side gate driver output 6 VB High side floating supply voltage Pin Assignments VCC COM 2 IN 3 IRS25752 1 VB 6 HO 5 VS 4 6-Lead SOT 23 7 January 4, 2017 IRS25752LPBF Package Details: 6L-SOT23 8 January 4, 2017 IRS25752LPBF Tape and Reel Details: 6L-SOT23 9 January 4, 2017 IRS25752LPBF Tape and Reel Details: 6L-SOT23 10 January 4, 2017 IRS25752LPBF Part Marking Information: 6 Lead SOT23 Top Marking 6 5 4 YW LC 1 2 Lot Code 3 Date Code Bottom Marking 1 2 3 E 6 Part no. 11 IR Logo 5 4 Base Part Number E IRS25752LPBF H IRS20752LPBF I IRS10752LPBF January 4, 2017 IRS25752LPBF Qualification Information† †† Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model IC Latch-Up Test RoHS Compliant Industrial (per JEDEC JESD 47E) Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. ††† MSL1 SOT-23 (per IPC/JEDEC J-STD-020C) Class B (per JEDEC standard EIA/JESD22-A115-A) Class 1B (per EIA/JEDEC standard JESD22-A114-B) Class I, Level A (per JESD78A) Yes † †† Qualification standards can be found at International Rectifier’s web site http://www.infineon.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. Revision History Comment Date 01/04/2017 12 • • • Updated "Infineon” logo –all pages Added disclaimer on last page. Updated part marking information on page 11. January 4, 2017 IRS25752LPBF Published by Infineon Technologies AG 81726 Munich, Germany © Infineon Technologies AG 2016 All Rights Reserved. IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. 13 January 4, 2017