FSAL200MTCX

FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch October 2007 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch Features Typical 6Ω Switch Connection Between Two Ports Minimal Propagation Delay Through the Switch Low ICC Zero Bounce in Flow-Through Mode Control Inputs Compatible with TTL Level Rail-to-Rail Signal Handling Route Communications Signals Include: Description The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1 high-speed CMOS TTL-compatible analog multiplexer / de-multiplexer switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When OE is low, the select pin connects the A Port to the selected B Port output. When OE is high, the switch is open and a high-impedance state exists between the two ports. - 10/100 Ethernet 100VG—AnyLAN ATM25 SONET OCI 51.8Mbps USB1.1 T1/E1 Token Ring 4/16Mbps Ordering Information Part Number FSAL200MTC FSAL200MTCX FSAL200QSC FSAL200QSCX Package Description 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Packing Method Rails Tape and Reel Rails Tape and Reel All packages are Pb-free per JEDEC standard J-SDD-020B. © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch Pin Configurations Figure 1. Analog Symbol Figure 2. Connection Diagram Control Input(s) X Low High OE High Low Low Function Disconnected A=B1 A=B2 Pin Descriptions Pin Names OE S A, B1, B2 Function Switch Enable Select Input Data Ports © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 2 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VSW VIN IIK IOUT ICC/IGND PD TSTG TA Supply Voltage DC Switch Voltage DC Input Voltage (1) (1) Parameter Min. -0.5 -0.5 -0.5 Max. 7.0 0.5 7.0 -50 120 ±100 0.5 Unit V V V mA mA mA W °C °C DC Input Diode Current at (IIK) VIN < 0V DC Output Current DC VCC or Ground Current Power Dissipation at 85°C Storage Temperature Range Ambient Temperature with Power Applied -65 -40 +150 +85 Note: 1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC VIN VSW VOUT TA tr,tf θJA Supply Voltage Control Input Voltage Switch Input Voltage Output Voltage Parameter (2) Min. 3.0 0 Max. 5.5 VCC VCC VCC Unit V V V V °C ns/V °C/W Operating Temperature Input Rise and Fall Time Control Input VCC=2.3V -3.6V Control Input VCC=4.5V -5.5V -40 0 0 +85 10 5 Thermal Resistance in Still Sir Note: 2. Control input must be held HIGH or LOW and it must not float. © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 3 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch DC Electrical Characteristics Typical values are at 25°C unless otherwise specified. Symbol Parameter Conditions VCC(V) TA=-40°C to +85°C Min. Typ. Max. Units VIH VIL IOZ RON IIN ICC Input Voltage High Input Voltage Low Off State Leakage Current Switch On Resistance (3) 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 0 ≤ VIN ≤ 5.5V ION=10 -30mA ION=10 -30mA VIN=VCC or GND VIN=VCC or GND VIN=VCC or GND, IOUT=0 0 to 5.5 4.5 to 5.5 3.0 to 3.6 5.5 3.6 5.5 VCC IA=-30 mA, VBN=3.15 IA=-10 mA, VBN=2.1 Bn, Bn, S-0V to 5V (3)(5) 2.0 2.0 -0.5 -0.5 6 15 0.8 0.8 100 12 22 ±1 ±1 1 0 0.4 1.0 100 80 3 7 VCC 2.0 3.0 V V µA Ω µA µA V Ω mΑ Ω Control Input Leakage Quiescent Supply Current, All Channels Off Analog Signal Range ΔRON On Resistance Matching (3)(4) Between Channels Output Current On Resistance Flatness 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 IO RFLAT(ON) A1, B1, B2=0V to 5V A1, B1, B2=0V to 5V Notes: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B ports). 4. ΔRON = RON maximum – RON minimum measured at identical VCC, temperature, and voltage levels. 5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 4 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch AC Electrical Characteristics Typical values are at 25°C unless otherwise specified. Symbol tON tOFF Q OIRR Parameter Turn-On Time Turn-Off Time Charge Injection Off Isolation Conditions VBn=3V VBn=1.5V VBn-3V VBn=1.5V CL=0.1nF,VGEN=0 RGEN=0Ω RL=100Ω ,f=30MHz RL=50Ω, f=1MHz RL=100Ω ,f=30MHz RL=50Ω, f=1MHz RL=100Ω RL=50Ω RL=100Ω VCC(V) 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 5.0 3.3 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 4.5 to 5.5 3.0 to 3.6 Min. Typ. 10 28 5 4 7 3 -55 -75 -70 -75 137 110 2 3 Max. 20 40 10 20 Units ns ns pC dB Figure Figure 3 Figure 4 Figure 3 Figure 4 Figure 5 Figure 6 Xtalk Crosstalk -3db Bandwidth ΔRON/RL dB Figure 7 BW D MHz % Figure 9 Figure 9 Notes: 6. Guaranteed by design. 7. Off Isolation =20 log10 [VA / VBn]. Capacitance TA=+25°C, f=1MHz. Capacitance is characterized, but not tested in production. Symbol CIN CIO-B CON Parameter Control Pin Input Capacitance B Port Off Capacitance A Port Off Capacitance Channel On Capacitance Conditions VCC=0V VCC=5.0V and 3.0V VCC=5.0V and 3.0V VCC=5.0V and 3.0V Typ. 2.3 8 13 15 Units pF pF pF Figure Figure 10 Figure 10 Figure 7 © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 5 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch AC Loadings and Waveforms Figure 3. AC Waveforms Figure 4. ton, toff Loading © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 6 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch AC Loadings and Waveforms (Continued) Figure 5. Charge Injection Test Figure 6. Off Isolation Figure 7. Channel On Capacitance Figure 8. Crosstalk Figure 9. Bandwidth Figure 10. Channel Off Capacitance © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 7 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch Physical Dimensions TOP VIEW LAND PATTERN RECOMMENDATION SIDE VIEW END VIEW DETAIL A Figure 11. 16-lead, Quarter Size Outline Package (QSOP), JEDEC MO-137. 0.150” wide Click here for tape and reel specifications, available at: http://www.fairchildsemi.com/products/analog/pdf/qsop16_tr.pdf © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 8 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch Physical Dimensions (Continued) 5.00±0.10 4.55 5.90 4.45 7.35 0.65 4.4±0.1 1.45 5.00 0.11 12° MTC16rev4 Figure 12. 16-lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm wide Click here for tape and reel specifications, available at: http://www.fairchildsemi.com/products/analog/pdf/tssop16_tr.pdf © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 9 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ μSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I31 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 10 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch © 2002 Fairchild Semiconductor Corporation FSAL200 Rev. 1.7.1 www.fairchildsemi.com 11