Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSAL200 — Wide Bandwidth Quad 2:1 Analog
Multiplexer / De-multiplexer Switch
Features
Description
The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1
high-speed CMOS TTL-compatible analog multiplexer /
de-multiplexer switch. The low on resistance of the
switch allows inputs to be connected to outputs without
adding propagation delay or generating additional
ground bounce noise.
Typical 6Ω Switch Connection Between Two Ports
Minimal Propagation Delay Through the Switch
Low ICC
Zero Bounce in Flow-Through Mode
Control Inputs Compatible with TTL Level
Rail-to-Rail Signal Handling
Route Communications Signals Include:
-
When OE is low, the select pin connects the A Port to
the selected B Port output. When OE is high, the switch
is open and a high-impedance state exists between the
two ports.
10/100 Ethernet
100VG—AnyLAN
ATM25
SONET OCI 51.8Mbps
USB1.1
T1/E1
Token Ring 4/16Mbps
Ordering Information
Package Description
Packing
Method
FSAL200MTC
16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide
Rails
FSAL200MTCX
16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide
Tape and
Reel
FSAL200QSC
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
Rails
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
Tape and
Reel
Part Number
FSAL200QSCX
All packages are Pb-free per JEDEC standard J-SDD-020B.
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
October 2007
Figure 1.
Analog Symbol
Figure 2. Connection Diagram
Control Input(s)
OE
Function
X
High
Disconnected
Low
Low
A=B1
High
Low
A=B2
Pin Descriptions
Pin Names
Function
OE
Switch Enable
S
Select Input
A, B1, B2
Data Ports
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
Pin Configurations
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
-0.5
7.0
V
-0.5
0.5
V
-0.5
7.0
V
VCC
Supply Voltage
VSW
DC Switch Voltage
VIN
DC Input Voltage
(1)
IIK
DC Input Diode Current at (IIK) VIN < 0V
-50
mA
DC Output Current
120
mA
DC VCC or Ground Current
±100
mA
IOUT
ICC/IGND
PD
(1)
Power Dissipation at 85°C
TSTG
TA
0.5
W
Storage Temperature Range
-65
+150
°C
Ambient Temperature with Power Applied
-40
+85
°C
Note:
1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
Control Input Voltage
VSW
Switch Input Voltage
VOUT
Min.
(2)
Max.
Unit
3.0
5.5
V
0
VCC
V
VCC
V
Output Voltage
VCC
V
-40
+85
°C
Control Input VCC=2.3V -3.6V
0
10
Control Input VCC=4.5V -5.5V
0
5
TA
Operating Temperature
tr,tf
Input Rise and Fall Time
θJA
Thermal Resistance in Still Sir
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
Absolute Maximum Ratings
ns/V
°C/W
Note:
2. Control input must be held HIGH or LOW and it must not float.
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
3
Typical values are at 25°C unless otherwise specified.
Symbol
Parameter
Conditions
VCC(V)
TA=-40°C to +85°C
Min.
VIH
Input Voltage High
VIL
Input Voltage Low
IOZ
Off State Leakage Current
RON
Switch On Resistance
IIN
Control Input Leakage
ICC
Quiescent Supply Current,
All Channels Off
(3)
IO
RFLAT(ON)
Max.
4.5 to 5.5
2.0
3.0 to 3.6
2.0
4.5 to 5.5
-0.5
0.8
3.0 to 3.6
-0.5
0.8
V
0 ≤ VIN ≤ 5.5V
0 to 5.5
ION=10 -30mA
4.5 to 5.5
6
12
ION=10 -30mA
3.0 to 3.6
15
22
100
±1
3.6
±1
VIN=VCC or GND, IOUT=0
5.5
1
µA
VCC
V
0
IA=-30 mA, VBN=3.15
4.5 to 5.5
0.4
2.0
IA=-10 mA, VBN=2.1
3.0 to 3.6
1.0
3.0
Output Current
Bn, Bn, S-0V to 5V
4.5 to 5.5
100
3.0 to 3.6
80
µA
Ω
mΑ
A1, B1, B2=0V to 5V
4.5 to 5.5
3
A1, B1, B2=0V to 5V
3.0 to 3.6
7
Ω
Notes:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the two (A or B ports).
4. ΔRON = RON maximum – RON minimum measured at identical VCC, temperature, and voltage levels.
5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the
specified range of conditions.
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
Ω
5.5
VCC
(3)(5)
µA
VIN=VCC or GND
On Resistance Matching
(3)(4)
Between Channels
On Resistance Flatness
V
VIN=VCC or GND
Analog Signal Range
ΔRON
Typ.
Units
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
DC Electrical Characteristics
www.fairchildsemi.com
4
Typical values are at 25°C unless otherwise specified.
Symbol
Parameter
tON
Turn-On Time
tOFF
Turn-Off Time
Q
OIRR
Xtalk
BW
D
Charge
Injection
Off Isolation
Crosstalk
Conditions
VCC(V)
Min.
Typ.
Max.
VBn=3V
4.5 to 5.5
10
20
VBn=1.5V
3.0 to 3.6
28
40
VBn-3V
4.5 to 5.5
5
10
VBn=1.5V
3.0 to 3.6
4
20
5.0
7
3.3
3
RL=100Ω ,f=30MHz
4.5 to 5.5
-55
RL=50Ω, f=1MHz
3.0 to 3.6
-75
RL=100Ω ,f=30MHz
4.5 to 5.5
-70
RL=50Ω, f=1MHz
3.0 to 3.6
-75
CL=0.1nF,VGEN=0
RGEN=0Ω
-3db
Bandwidth
RL=100Ω
4.5 to 5.5
137
RL=50Ω
3.0 to 3.6
110
ΔRON/RL
RL=100Ω
4.5 to 5.5
2
3.0 to 3.6
3
Units
ns
ns
Figure
Figure 3
Figure 4
Figure 3
Figure 4
pC
Figure 5
dB
Figure 6
dB
Figure 7
MHz
Figure 9
%
Figure 9
Notes:
6. Guaranteed by design.
7. Off Isolation =20 log10 [VA / VBn].
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, but not tested in production.
Symbol
CIN
CIO-B
CON
Parameter
Conditions
Typ.
Units
2.3
pF
Control Pin Input Capacitance
VCC=0V
B Port Off Capacitance
VCC=5.0V and 3.0V
8
A Port Off Capacitance
VCC=5.0V and 3.0V
13
Channel On Capacitance
VCC=5.0V and 3.0V
15
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
pF
pF
Figure
Figure 10
Figure 10
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
AC Electrical Characteristics
Figure 7
www.fairchildsemi.com
5
Figure 3. AC Waveforms
FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch
AC Loadings and Waveforms
Figure 4. ton, toff Loading
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
6
Figure 5.
Charge Injection Test
Figure 6. Off Isolation
Figure 7. Channel On Capacitance
Figure 8. Crosstalk
Figure 9. Bandwidth
Figure 10.
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
AC Loadings and Waveforms (Continued)
Channel Off Capacitance
www.fairchildsemi.com
7
FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
Physical Dimensions
LAND PATTERN
RECOMMENDATION
TOP VIEW
END VIEW
SIDE VIEW
DETAIL A
Figure 11.
16-lead, Quarter Size Outline Package (QSOP), JEDEC MO-137. 0.150” wide
Click here for tape and reel specifications, available at:
http://www.fairchildsemi.com/products/analog/pdf/qsop16_tr.pdf
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
8
5.00±0.10
4.55
5.90
4.45 7.35
0.65
4.4±0.1
1.45
5.00
0.11
12°
FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
Physical Dimensions (Continued)
MTC16rev4
Figure 12.
16-lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm wide
Click here for tape and reel specifications, available at:
http://www.fairchildsemi.com/products/analog/pdf/tssop16_tr.pdf
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
9
ACEx®
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
Power247®
POWEREDGE®
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
Green FPS™
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FPS™
FRFET®
Global Power ResourceSM
®
PDP-SPM™
Power220®
SuperSOT™-8
SyncFET™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
μSerDes™
UHC®
UniFET™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In Design
This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I31
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
10
FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
© 2002 Fairchild Semiconductor Corporation
FSAL200 Rev. 1.7.1
www.fairchildsemi.com
11
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com