89-03KA-0U

89 Uncompensated SPECIFICATIONS     316L SS Pressure Sensor High Pressure 0 - 100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 89 uncompensated features 5/16-32 UNEF threads and can be welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as well as custom process fittings. Contact factory for threaded fitting options. The 89 uncompensated is designed for high pressure OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. Please refer to the 89 compensated and constant voltage datasheets for more information on different features of the 89. SENSOR SOLUTIONS ///89U 09/2017 Page 1 89 Uncompensated FEATURES     Weldable and Threaded Process Fittings -40ºC to +125ºC Operating 1. Temperature Range ±0.25% Pressure Non Linearity Solid State Reliability APPLICATIONS     Hydraulic Controls Process Control Pressure Calibrators Refrigeration/Compressors STANDARD RANGES Range 0 to 01k 0 to 03k 0 to 05k 0 to 10k SENSOR SOLUTIONS ///89U psia     09/2017 Page 2 89 Uncompensated PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS Sensitivity MIN TYP MAX UNITS 15 22 28 mV/V@FS Zero Pressure Output -4 4 mV/V Pressure Non Linearity -0.25 0.25 %Span Pressure Hysteresis ±0.05 Repeatability Input/Output Resistance 4500 1 %Span ±0.02 3900 NOTES %Span 5100 Ω 2 Temperature Coefficient – Resistance 1300 1510 1750 ppm/°C 3 Temperature Coefficient – Sensitivity -1450 -1250 -1000 ppm/°C 3 2 µV/V/ºC 3 Thermal Hysteresis – Span ±0.05 %Span 3 Thermal Hysteresis – Offset ±0.05 %Span 3 Long Term Stability – Span ±0.1 %Span/Year 4 Long Term Stability – Offset ±0.1 %Span/Year 4 Temperature Coefficient – Offset Supply Current 0.5 1.5 Supply Voltage Insulation Resistance (50Vdc) 2.0 mA 9.5 50 V MΩ 5 Pressure Overload 3X Rated 6 Pressure Burst 4X Rated 7 -40 +125 ºC Storage Temperature -50 +125 ºC Torque 154 180 in-lb 9 grams Operating Temperature Weight Media – Pressure Port 8 Liquids and Gases compatible with 316/316L Stainless Steel Notes 1. Measured at ambient temperature. 2. Best fit straight line. 3. Measured with both -E pins shorted together. 4. Over the temperature range -20°C to +85°C with respect to 25°C. 5. Minimum resistance between case and pins. 6. 3X or 20,000psi, whichever is less. The maximum pressure that can be applied without changing the transducer’s performance or accuracy. 7. 4X or 30,000psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 8. For devices without fittings, typical receptacle is 316 ST STL, tensile strength 75,000psi min. 9. Direct mechanical contact with diaphragm is prohibited. Diaphragm surface must remain free of defects (scratches, punctures, fingerprints, etc.) for device to operate properly. Caution is advised when handling parts with exposed diaphragms. Use protective cap whenever devices are not in use. 10. Testing: All 03k, 05k and 10kpsi parts are tested at 2500psi and calculated to full scale pressure respectively. 11. Marking: Parts are marked with company name, model number, pressure range, lot number, serial number, and date code 12. Shipping: The stainless steel diaphragm is protected by a static dissipative cap. Each unit is packaged individually in a plastic container with anti-static foam. SENSOR SOLUTIONS ///89U 09/2017 Page 3 89 Uncompensated DIMENSIONS SENSOR SOLUTIONS ///89U 09/2017 Page 4 89 Uncompensated Fitting Dimensions Table Fitting MEAS P/N Type 1 IC-D00364 2 IC-D00365 ‘A’ DIM ‘B’ DIM ‘C’ DIM 1/4-18 NPT 1/8-27 NPT .93 [23.6] .91 [23.1] 7/8 [22.2] HEX 7/8 [22.2] HEX 3 4 IC-D00366 IC-D00348 7/16-20 UNF 1/4-18 NPT .77 [19.6] .82 [20.8] 7/8 [22.2] HEX 5/8 [15.9] HEX 5 8 IC-D00367 IC-D00349 1/4-19 BSP 1/8-27 NPT .82 [20.8] .71 [18.0] 3/4 [19.0] HEX 5/8 [15.9] HEX .89 [22.6] 7/8 [22.2] HEX 9 IC-D00368 1/4-19 BSP Note: Fitting Type “4” Assembly Shown All Dimensions are for Reference Only SENSOR SOLUTIONS ///89U 09/2017 Page 5 89 Uncompensated ACCESSORIES CONNECTIONS SENSOR SOLUTIONS ///89U 09/2017 Page 6 89 Uncompensated ORDERING INFORMATION 89 Model Name Pressure range [psi] 01=1000 05=5000 03=3000 10=10.000 ― 01 K A ― 0 U K Pressure Type A=Absolute Fitting Type 0=No Fitting See Fitting Dimensions Table for list of fitting options Electrical Connections U=Leads *Refer to ‘Comp’ data sheet for devices with comp board, ribbon cable, and cable with connectors NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company Tel: 800-522-6752 Email: customercare.frmt@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Tel: 800-440-5100 Email: customercare.lcsb@te.com Measurement Specialties (China), Ltd., a TE Connectivity Company Tel: 0400-820-6015 Email: customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliabl e. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///89U All Rights Reserved. 09/2017 Page 7