DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
DTM13-12PA-R019
ACTIVE
DEUTSCH | DEUTSCH DTM
TE Internal #: 2333580-1
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19
mm [.165 in] Centerline, Fully Shrouded, Nickel, Through Hole Solder, DEUTSCH DTM
View on TE.com >
Connectors > PCB Connectors > PCB Headers & Receptacles > DEUTSCH DTM Headers
Connector System: Wire-to-Board
Number of Positions: 12
Centerline (Pitch): 4.19 mm [ .165 in ]
Sealable: Yes
PCB Mount Orientation: Right Angle
All DEUTSCH DTM Headers (32)
Features
Product Type Features
Mixed & Hybrid Header
No
Connector Shape
Rectangular
PCB Connector Assembly Type
PCB Mount Header
Header Type
Fully Shrouded
Connector System
Wire-to-Board
Sealable
Yes
Connector & Contact Terminates To
Wire & Cable
Configuration Features
Number of Sections
1
Number of Signal Positions
12
Number of Positions
12
PCB Mount Orientation
Right Angle
Number of Rows
2
For support call+1 800 522 6752
01/02/2024 09:23PM | Page 1
DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
Number of Rows
2
Electrical Characteristics
Voltage Rating (Max)
250 VAC
Nominal Voltage Architecture
12 V, 24 V
Operating Voltage
250 VAC
Body Features
Primary Product Color
Black
Connector & Keying Code
A
Contact Features
Contact Size
Size 20
Contact Type
Pin
Mating Pin Diameter
1.02 mm[.04 in]
Contact Mating Area Plating Material
Nickel
Contact Current Rating (Max)
7.5 A
Termination Features
Termination Method to Printed Circuit Board
Through Hole - Solder
Mechanical Attachment
Mounting Holes
With
Mating Retention
With
Mating Alignment
With
PCB Mount Alignment
Without
Panel Mount Feature
Without
PCB Mount Retention
With
PCB Mount Retention Type
Mounting Screw
Mating Retention Type
Locking Interface
Connector Mounting Type
Board Mount
Housing Features
Centerline (Pitch)
4.19 mm[.165 in]
Dimensions
Connector Length
36.91 mm[1.453 in]
Connector Width
101 mm[3.976 in]
PCB Thickness (Recommended)
.78 – 2.36 mm[.031 – .093 in]
Profile Height from PCB
25.71 mm[1.012 in]
For support call+1 800 522 6752
01/02/2024 09:23PM | Page 2
DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
Profile Height from PCB
25.71 mm[1.012 in]
Usage Conditions
Operating Temperature (Max)
125 °C[257 °F]
Operating Temperature Range
-55 – 125 °C[-67 – 257 °F]
Operation/Application
Shielded
No
Circuit Application
Signal
Industry Standards
Degree of Protection
IP67
UL Rating
Recognized
UL Flammability Rating
UL 94V-0
Packaging Features
Packaging Type
Box
Packaging Quantity
63
Other
Interface Number
DTM04-12P
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU
Compliant with Exemptions
EU ELV Directive 2000/53/EC
Compliant with Exemptions
China RoHS 2 Directive MIIT Order No 32, 2016
Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006
Current ECHA Candidate List: JUNE 2023
(235)
Candidate List Declared Against: JAN 2023
(233)
SVHC > Threshold:
Pb (2.53% in Subcomponent)
Article Safe Usage Statements:
Do not eat, drink or smoke when using this product. Wash thoroughly after
handling. Recycle if possible and dispose of the article by following all applicable
governmental regulations relevant to your geographic location.
Halogen Content
Not Yet Reviewed for halogen content
Solder Process Capability
Not reviewed for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
For support call+1 800 522 6752
01/02/2024 09:23PM | Page 3
DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides
on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on
requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach
Compatible Parts
TE Part # CAT-D485-CH8172
TE Part # EEC-325X4B-E016
TE Part # EEC-325X4B
TE Part # EEC-325X4A
DEUTSCH DTM Housings
ENCLOSURE, 3.25 X 4, CLR, NO VENT
ENCLOSURE, 3.25 X 4, BLK, NO VENT
ENCLOSURE, 3.25 X 4, BLK, VENT
Connector Backshells(6)
TE Part # EEC-325X4A-E016
ENCLOSURE, 3.25 X 4, CLR, VENT
Also in the Series DEUTSCH DTM
Automotive Connector Caps & Covers
(7)
Automotive Connector Locks &
Position Assurance(17)
Automotive Housings(100)
Connector Strain Relief(28)
Insertion & Extraction Tools(2)
PCB Headers & Receptacles(36)
Customers Also Bought
For support call+1 800 522 6752
01/02/2024 09:23PM | Page 4
DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
Customers Also Bought
TE Part #206226-1
TE Part #2333581-1
TE Part #102387-4
TE Part #EEC-325X4B
CPC PLUG ASSEMBLY SIZE 23-7
DTM13-12PA-R020, HDR,12P, BLK,RA,
NI/CU,A
20 MODIV HSG COMP DR .100 POL
ENCLOSURE, 3.25 X 4, BLK, NO VENT
TE Part #86016-5
TE Part #DTM13-12PA-R008
TE Part #794805-1
TE Part #2213775-7
MOD IV RECP LP
HDR, 12P, BLK, RA EEC, NI/CU, A
4 CIR UMNL PLUG,ROUND HOLES
AV16 SPM 0.4VA POWER LED GREEN
12V
TE Part #CSI-SGFE-100-UFFR
TE Part #2018210-1
SMA to U.FL/MHF1 100mm 1.13 OD
PIN, INSULATOR
Documents
Product Drawings
DTM13-12PA-R019, HDR,12P, BLK,RA,NI/CU,A
English
CAD Files
3D PDF
3D
Customer View Model
ENG_CVM_CVM_2333580-1_A.2d_dxf.zip
English
Customer View Model
ENG_CVM_CVM_2333580-1_A.3d_igs.zip
English
Customer View Model
ENG_CVM_CVM_2333580-1_A.3d_stp.zip
English
By downloading the CAD file I accept and agree to the Terms and Conditions of use.
Product
Specifications
For support call+1
800 522
6752
01/02/2024 09:23PM | Page 5
DTM13-12PA-R019
PCB Mount Header, Right Angle, Wire-to-Board, 12 Position, 4.19 mm [.165 in]
Centerline, Fully Shrouded, Nickel, Through Hole - Solder, DEUTSCH DTM
Product Specifications
Product Specification
English
Product Specification
English
For support call+1 800 522 6752
01/02/2024 09:23PM | Page 6