HC-1

KILOVAC High Voltage Relays HC Series — 3.5 kV Relays HC-1 No Load Switching HC-3 Make & Break Load Switching Product Facts for HC-1 n Widely used for RF applications n Vacuum dielectric for low leakage current applications n Copper contacts for high current capability n Not designed for power switching n Meets requirements of MIL-R-83725 n QPL version available, M83725/5-001 Product Facts for HC-3 n Tungsten contacts for long life when power switching n For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Vacuum dielectric for power switching low current loads HC-5 Make Only Load Switching Product Facts for HC-5 n Gas-filled for “make only” power switching n SF-6 gas-filled for capacitive discharge applications n Tungsten contacts for long life when power switching Product Specifications for HC-1, HC-3 and HC-5 Contact Arrangement — SPDT Contact Form — C Test Voltage, DC or 60 Hz (Peak) — 5 kV Rated Operating Voltage (Peak) — DC or 60 Hz — 3.5 kV 2.5 MHz — 2.5 kV 16 MHz — 2 kV 32 MHz — 1.5 kV Continuous Carry Current, Max. — DC or 60 Hz — HC-1 — 25 A HC-3 — 18 A HC-5 — 8 A 2.5 MHz — HC-1 — 14 A 16 MHz — HC-1 — 9 A 32 MHz — HC-1 — 7 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Contact Capacitance — Between Open Contacts — HC-1 —2 pF Open Contacts to Ground — HC-1 —2.5 pF Contact Resistance, Max. — HC-1 — 0.01 ohm HC-3 — 0.02 ohm HC-5 — 0.50 ohm* Operate Time, Max. — 6 ms Release Time, Max. — 6 ms Shock, 11ms, 1/2 Sine (Peak) — 50 g Vibration — Peak — 10 g (55 to 2000 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life — HC-1, HC-3 — 2 million cycles HC-5 — 1 million cycles Weight, Nominal — 28.35 g (1.0 oz.) Note: *Contact resistance for gas-filled relays is measured at 28 Vdc, 1 Amp Coil Data Nominal Volts DC Pickup, Max. Dropout Coil Resistance (±10%) 12 Vdc 8 Vdc .5-5 Vdc 80 Ω 26.5 Vdc 16 Vdc 1-10 Vdc 335 Ω 115 Vdc 80 Vdc 5-50 Vdc 6000 Ω Ratings listed are for 25°C, sea level conditions Ordering Information Sample Part Number 䊳 HC- 1 /12Vdc Series: Model: 1 3 5 Coil Voltage: Blank = 26.5 Vdc /12Vdc = 12 Vdc /115Vdc = 115 Vdc 7–58 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com KILOVAC High Voltage Relays HC Series — 8 kV Relays HC-2 No Load Switching HC-4 Make & Break Load Switching Product Facts for HC-2 n Vacuum dielectric and copper contacts for high current carry rating of 25 Amps n Not designed for power switching n Stable, low contact resistance n Product Facts for HC-4 n Tungsten contacts for long life in power switching applications n Vacuum dielectric for arc suppression when making or breaking a load Meets requirements of MIL-R-83725 n Meets requirements of MIL-R-83725 HC-6 Make Only Load Switching Product Facts for HC-6 n Tungsten contacts for switching high in-rush loads n SF-6 gas-filled for capacitive discharge applications n Suitable for ESD testing applications n Tungsten contacts for long life in power switching applications Product Specifications for HC-2, HC-4 and HC-6 Contact Arrangement — SPDT Contact Form — C Test Voltage, DC or 60 Hz (Peak) — 10 kV Rated Operating Voltage (Peak) — DC or 60 Hz — 8 kV Continuous Carry Current, Max. — DC or 60 Hz — HC-2 — 25 A RMS HC-4 — 15 A RMS HC-6 — 8 A RMS Coil Hi-Pot (Vrms, 60 Hz) — 500 A RMS Contact Capacitance — Between Open Contacts — N/A Open Contacts to Ground — N/A Contact Resistance, Max. — HC-2 — 0.01 ohm HC-4 — 0.02 ohm HC-6 — 0.5 ohm* Operate Time, Max. — 6 ms Release Time, Max. — 6 ms Shock, 11ms, 1/2 Sine (Peak) — 50 g Vibration — Peak — 10 g (55 to 2000 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life — HC-2 and HC-4 — 2 million cycles HC-6 — 1 million cycle Weight, Nominal — 39.69 g (1.4 oz.) *Contact resistance for gas-filled relays is measured at 28 Vdc, 1 Amp Coil Data Nominal Volts DC Pickup, Max. Dropout Coil Resistance (±10%) 12 Vdc 8 Vdc .5-5 Vdc 80 Ω 26.5 Vdc 16 Vdc 1-10 Vdc 335 Ω 115 Vdc 80 Vdc 5-50 Vdc 6000 Ω Ratings listed are for 25°C, sea level conditions Ordering Information HC- 6 /12Vdc Sample Part Number 䊳 Series: Model: 2 For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 4 6 Coil Voltage: Blank = 26.5 Vdc /12Vdc = 12 Vdc /115Vdc = 115 Vdc 7–64 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com