PD5AB57

KILOVAC 28 - 1800 Vdc High Voltage Relays PD5 Make & Break Load Switching Product Facts n Vacuum dielectric for power switching n Excellent for control applications n PCB and panel mountings n Rugged design for the most demanding applications, including seismic shock n Small size and weight n Low power consumption n No heat sinks required n Vacuum-sealed; can operate in explosive and harsh environments n 2000 V isolation across open contacts Contact Ratings* Product Specifications Note: **Contact TE for availability of other contact forms For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. *Based on extrapolated data. Since each application is unique, user is encouraged to verify rating in actual application. The load terminals should always be connected as follows: Common Contact (A2) positive; Other Contact negative. Coil Data Nominal Volts DC Max. Coil Voltage Pickup, Max. @ 85°C Hold, Min. @ 85°C Dropout, Min. @ -40°C Coil Resistance (±10%) 12 Vdc 14 Vdc 8 Vdc 3.3 Vdc .5 Vdc 70 Ω 24 Vdc 28 Vdc 16 Vdc 10 Vdc 1 Vdc 290 Ω 125 Vdc 130 Vdc 80 Vdc 33 Vdc 5 Vdc 4700 Ω Ratings listed are for 25°C, sea level conditions Ordering Information PD5 A 2 3 5 Sample Part Number 䊳 Series: Contact Form: A = SPST-NO B = SPST-NC C = SPDT (PCB Only) Coil Voltage: 2 = 12 Vdc, PCB Version 3 = 24 Vdc, PCB Version 5 = 125 Vdc, PCB Version A = 12 Vdc, Panel Mount Version B = 24 Vdc, Panel Mount Version C = 125 Vdc, Panel Mount Version 7 KILOVAC 28-1800 Vdc High Voltage Relays Contact Arrangement — PD5A — SPST-NO PD5B — SPST-NC Contact Form — PD5A — A** PD5B — B** Rated Resistive Load @ 320 Vdc — 5A Continuous Current Carry, Max. @ 85°C — 15 A Overload @ 320 Vdc, (Make/Break) — 20 A Life, (Mechanical/Rated Load) — 500k cycles/50k cycles Contact Resistance, Max., End of Life — 0.010 ohm Dielectric at Sea Level — Power Terminals to Coil and All Other Points — 1,800 Vrms Shock, 11ms, 1/2 Sine (Peak) — 25 g Vibration, Sinusoidal (55-2000 Hz, Peak) — 5 g Operating Ambient Temperature Range — -40°C to +85°C Operate Time, Max., Including Bounce @ 25°C — 10 ms Release Time, Max., Including Bounce @ 25°C — 10 ms Insulation Resistance @ 500 Vdc, Min. — Initial/End of Life — 100 mohm/50 mohm Weight, Nominal — 57 g (.125 lb) Power Terminals: 3 = PCB Solder Connection 5 = Stud Terminal, Panel Mount Mounting: 5 = PCB Mount 7 = Panel Mount 7–55 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com