IRG4PC40KPBF

PD - 95646 IRG4PC40KPbF INSULATED GATE BIPOLAR TRANSISTOR Features • Short Circuit Rated UltraFast: Optimized for high operating frequencies >5.0 kHz , and Short Circuit Rated to 10µs @ 125°C, VGE = 15V • Generation 4 IGBT design provides higher efficiency than Generation 3 • Industry standard TO-247AC package • Lead-Free C Short Circuit Rated UltraFast IGBT VCES = 600V G E VCE(on) typ. = 2.1V @VGE = 15V, IC = 25A n-channel Benefits • Generation 4 IGBTs offer highest efficiency available • IGBTs optimized for specified application conditions Absolute Maximum Ratings Parameter VCES IC @ TC = 25°C IC @ TC = 100°C ICM ILM tsc VGE EARV PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current  Clamped Inductive Load Current ‚ Short Circuit Withstand Time Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy ƒ Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Mounting torque, 6-32 or M3 screw. TO-247AC Max. 600 42 25 84 84 10 ±20 15 160 65 -55 to +150 300 (0.063 in. (1.6mm) from case) 10 lbf•in (1.1N•m) Units V A µs V mJ W °C Thermal Resistance Parameter RθJC RθCS RθJA Wt Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient, typical socket mount Weight Typ. ––– 0.24 ––– 6 (0.21) Max. 0.77 ––– 40 ––– Units °C/W g (oz) 7/26/04 IRG4PC40KPbF Electrical Characteristics @ TJ = 25°C (unless otherwise specified) V(BR)CES V(BR)ECS ∆V(BR)CES/∆TJ VCE(ON) VGE(th) ∆VGE(th)/∆TJ gfe ICES IGES Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 — Emitter-to-Collector Breakdown Voltage „ 18 — Temperature Coeff. of Breakdown Voltage — 0.46 — 2.10 Collector-to-Emitter Saturation Voltage — 2.70 — 2.14 Gate Threshold Voltage 3.0 — Temperature Coeff. of Threshold Voltage — -13 Forward Transconductance … 7.0 14 — — Zero Gate Voltage Collector Current — — — — Gate-to-Emitter Leakage Current — — Max. Units Conditions — V VGE = 0V, IC = 250µA — V VGE = 0V, IC = 1.0A — V/°C VGE = 0V, IC = 1.0mA 2.6 IC = 25A VGE = 15V — IC = 42A See Fig.2, 5 V — IC = 25A , TJ = 150°C 6.0 VCE = VGE, IC = 250µA — mV/°C VCE = VGE, IC = 250µA — S VCE = 100 V, IC = 25A 250 VGE = 0V, VCE = 600V µA 2.0 VGE = 0V, VCE = 10V, TJ = 25°C 2000 VGE = 0V, VCE = 600V, TJ = 150°C ±100 n A VGE = ±20V Switching Characteristics @ TJ = 25°C (unless otherwise specified) Qg Qge Qgc t d(on) tr td(off) tf Eon Eoff Ets t sc t d(on) tr t d(off) tf E ts LE Cies Coes Cres Notes: Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Short Circuit Withstand Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. — — — — — — — — — — 10 — — — — — — — — — Typ. 120 16 51 30 15 140 140 0.62 0.33 0.95 — 30 18 190 150 1.9 13 1600 130 55 Max. Units Conditions 180 IC = 25A 24 nC VCC = 400V See Fig.8 77 VGE = 15V — — TJ = 25°C ns 210 IC = 25A, VCC = 480V 210 VGE = 15V, RG = 10Ω — Energy losses include "tail" — mJ See Fig. 9,10,14 1.4 — µs VCC = 400V, TJ = 125°C VGE = 15V, RG = 10Ω , VCPK < 500V — TJ = 150°C, — IC = 25A, VCC = 480V ns — VGE = 15V, RG = 10Ω — Energy losses include "tail" — mJ See Fig. 11,14 — nH Measured 5mm from package — VGE = 0V — pF VCC = 30V See Fig. 7 — ƒ = 1.0MHz  Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. ( See fig. 13b ) ƒ Repetitive rating; pulse width limited by maximum junction temperature. ‚ VCC = 80%(VCES), VGE = 20V, L = 10µH, RG = 10Ω, (See fig. 13a) „ Pulse width ≤ 80µs; duty factor ≤ 0.1%. … Pulse width 5.0µs, single shot. 2 www.irf.com IRG4PC40KPbF 60 For both: Triangular wave: Duty cycle: 50% TJ = 125°C Tsink = 90°C Gate drive as specified Power Dissipation = 35W Load Current (A) 40 Clamp voltage: 80% of rated Square wave: 60% of rated voltage 20 Ideal diodes 0 0.1 1 10 A 100 f, Frequency (kHz) Fig. 1 - Typical Load Current vs. Frequency (Load Current = IRMS of fundamental) 100 100 I C , Collector-to-Emitter Current (A) IC , Collector-to-Emitter Current (A) TJ = 150°C TJ = 25°C 10 TJ = 150 o C 10 TJ = 25 oC 1 0.1 V GE = 15V 20µs PULSE WIDTH 1 10 1 5 7 V CC = 50V 5µs PULSE WIDTH A 9 11 VCE , Collector-to-Emitter Voltage (V) VGE, Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics www.irf.com Fig. 3 - Typical Transfer Characteristics 3 IRG4PC40KPbF 50 5.0 VCE , Collector-to-Emitter Voltage(V) VGE = 15V 80 us PULSE WIDTH IC = 50 A Maximum DC Collector Current(A) 40 4.0 30 3.0 20 IC = 25 A 2.0 10 IC =12.5 A 0 25 50 75 100 125 150 1.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 TC , Case Temperature ( ° C) TJ , Junction Temperature ( ° C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature 1 Thermal Response (Z thJC ) D = 0.50 0.20 0.1 0.10 0.05 0.02 0.01 PDM t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC + TC 0.001 0.01 0.1 1 0.01 0.00001 0.0001 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4PC40KPbF 3000 2500 VGE , Gate-to-Emitter Voltage (V) 100 VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 20 VCC = 400V I C = 25A 16 C, Capacitance (pF) 2000 Cies 1500 12 8 1000 500 4 Coes Cres 1 10 0 0 0 20 40 60 80 100 120 140 VCE , Collector-to-Emitter Voltage (V) QG , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage 1.80 10 Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage RG = 10Ohm Ω VGE = 15V VCC = 480V Total Switching Losses (mJ) Total Switching Losses (mJ) V CC = 480V V GE = 15V TJ = 25 ° C 1.60 I C = 25A IC = 50 A IC = 25 A 1 1.40 IC = 12.5 A 1.20 1.00 0.80 0 10 20 30 40 50 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 RG , Gate Resistance (Ohm) Ω TJ , Junction Temperature ( °C ) Fig. 9 - Typical Switching Losses vs. Gate Resistance www.irf.com Fig. 10 - Typical Switching Losses vs. Junction Temperature 5 IRG4PC40KPbF 5.0 3.0 2.0 I C , Collector-to-Emitter Current (A) Total Switching Losses (mJ) RG TJ VCC 4.0 VGE = 10Ohm Ω = 150 ° C = 480V = 15V 1000 VGE = 20V T J = 125 oC 100 10 1.0 SAFE OPERATING AREA 0.0 0 10 20 30 40 50 1 1 10 100 1000 I C , Collector-to-emitter Current (A) VCE , Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 6 www.irf.com IRG4PC40KPbF L 50V 1000V VC * D.U.T. RL = 0 - 480V 480V 4 X IC@ 25°C c 480µF 960V d * Driver same type as D.U.T.; Vc = 80% of Vce(max) * Note: Due to the 50V power supply, pulse width and inductor will increase to obtain rated Id. Fig. 13a - Clamped Inductive Load Test Circuit Fig. 13b - Pulsed Collector Current Test Circuit IC L Driver* 50V D.U.T. VC Fig. 14a - Switching Loss Test Circuit * Driver same type as D.U.T., VC = 480V ™Ã 1000V d e c d 90% e VC 90% 10% t d(off) Fig. 14b - Switching Loss Waveforms 10% I C 5% t d(on) tr E on E ts = (Eon +Eoff ) tf t=5µs E off www.irf.com 7 IRG4PC40KPbF TO-247AC Package Outline Dimensions are shown in millimeters (inches) TO-247AC Part Marking Information EXAMPLE: THIS IS AN IRFPE30 WIT H ASS EMBLY LOT CODE 5657 ASS EMBLED ON WW 35, 2000 IN THE ASS EMBLY LINE "H" Note: "P" in assembly line position indicates "Lead-Free" PART NUMBER INT ERNATIONAL RECT IFIER LOGO AS S EMBLY LOT CODE IRFPE30 56 035H 57 DATE CODE YEAR 0 = 2000 WEEK 35 LINE H Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 07/04 8 www.irf.com