TSL250-080F-2

PolySwitch Resettable Devices – Telecommunications & Networking Devices PolySwitch Resettable Devices Telecommunications & Networking Devices This family of telecommunication and networking devices was initially designed over 10 years ago to meet the growing demand for resettable families overcurrent protection. These product help provide protection against damage caused by power cross and power induction surges as defined in ITU, Telcordia GR1089, and UL60950. Available in chip, surface-mount, and radial-leaded configurations, Tyco Electronics’ PolySwitch devices help improve the reliability of customer premise and network equipment world wide. Benefits • Many product choices give engineers more design flexibility • Compatible with high volume electronics assembly • Assist in meeting regulatory equipment requirements • Improved line balance • Applicable for legacy POTS and modern digital communications equipment Features • RoHS compliant • Resettable overcurrent protection • Surface-mount, radial-leaded, and chip form factors • Fast time-to-trip • Agency recognition: UL, CSA, TÜV • Resistance sorted and matched devices available • Low parasitic capacitance/flat impedance with frequency Applications • Modems • Phone sets • Fax machines • Phone wall outlets • Alarm systems • PBX systems • MDF modules • Analog and digital line cards • T1/E1 equipment • xDSL modems and splitters • Powered ethernet systems • VoIP (Voice over Internet Protocol) equipment • LAN, WAN equipment • Customer premise equipment • Access network hardware 10 187 Application Guide for Telecommunications and Networking Devices* To use this guide, follow the steps below: 1. Select your equipment type from the guide below. 2. Select the type of protection depending on the agency and regional specifications in the second column. 3. Select the form factor for your application. 4. Use the Agency Specification/ PolySwitch Device Selection Guide on the next page to select a specific part number for each application based on the agency requirements. 5. Parts with fast time-to-trip or low resistance are available. Please consult a Tyco Electronics representative. Overcurrent Protection Region/ Specification North America TIA-968-A, UL 60950, GR1089 Port Type 3‡ Europe/Asia/ South America ITU K.21 Form Factor Radial-leaded TRF600-150 TR600-150F-EX TRF600-160 TRF600-400 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 Access network equipment (†) Remote terminals, line repeaters, multiplexers, cross-connects, WAN equipment North America GR1089 Port Type 5‡ TRF600-160 TRF600-400 TS600-170F TS600-200F TS600-400F TSM600-250F TSM600-400F FT600-1250** Europe/Asia/ South America ITU K.45 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 Central office switching equipment (†) Analog/POTS linecards, ISDN linecards, xDSL modems, ADSL/VDSL splitters, T1/E1 linecards, multiplexers, CSU/DSU, servers Europe/Asia/ South America ITU K.20 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 Primary protection modules (†) MDF modules, Network Interface Devices (NID) North America Telcordia GR-974 Europe/Asia/ South America ITU K.20 TRF250-183 TRF250-184 TRF250-055UT TRF250-080U TRF250-110U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 Short-haul/intrabuilding communications equipment (†) LAN equipment, VoIP cards, cable telephony NIUs, wireless local loop handsets Europe/Asia/ South America ITU K.21 North America GR1089 Port Type 2‡ GR1089 Port Type 4‡ TRF250-080U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 TS250-130F TSV250-130F TSL250-080F TS250-130F TSV250-130F TSL250-080F TS250-130F TSV250-130F TCF250-100T TCF250-120T TCF250-145T TCF250-180 North America GR1089 Port Type 1‡ TRF600-160 TRF600-400 TS600-170F TS600-200F TS600-400F TSM600-250F TSM600-400F FT600-1250** TS250-130F TSV250-130F TCF250-180 TS250-130F TSV250-130F Surface-mount TS600-170F TS600-200F TSM600-250F TSM600-400F TS250-130F TSV250-130F Chip Application Customer Premises equipment IT equipment Analog modems, V.90 modems, ISDN modems, xDSL modems, ADSL splitters, phone sets, fax machines, answering machines, caller ID, internet appliances, PBX systems, POS terminals, wall plugs 10 188 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Protection Application Guide for Telecommunications and Networking Devices* Overcurrent Protection Region/ Specification North America GR1089 Port Type 4‡ Form Factor Radial-leaded TRF250-080U TRF250-120 TRF250-120T TRF250-145 TRF250-183 TRF250-184 IEEE 802.3AF/AT Power over Ethernet protection Powered Ethernet switches and terminals, IP phones, wireless LAN base stations, microcellular base stations, VoIP cards Cable telephony powering system Power passing taps * † ‡ ** †† ‡‡ Cont’d Application LAN intrabuilding power cross protection LAN equipment, VoIP cards, IP phones Surface-mount TSL250-080F TS250-130F TSV250-130F Chip decaSMDC050F/60-2†† BBRF550‡‡ This list is not exhaustive. Tyco Electronics welcomes our customers’ input for additional application ideas for PolySwitch resettable devices. For improved line balance in these applications, resistance-matched parts are recommended. May require additional impedance or coordination with primary protector. FT600-1250 are surface mount telecom fuse devices. FT600-0500 and FT600-2000 reference also available. See telecom fuses section. For details on decaSMDC050F/60-2, see surface-mount devices section. For details on BBRF series, see radial-leaded devices section. Agency Specification/Selection Guide for Telecommunications and Networking Devices Use the guide below to select the PolySwitch devices which are typically used in your application. The following pages contain the specifications for the part numbers recommended below. PolySwitch devices assist telecommunication equipment in meeting the applicable protection requirements of these industry specifications. Refer to individual agency specifications for test procedures and circuit schematics. Users should independently evaluate the suitability of, and test each product for their application. Family TCF250 Product* TCF250-100T Lightning ITU K.20 – 1.0kV 10/700µs GR-1089 Port Types 2 & 4 – 1st Level Power Cross/Contact/Induction PRC YD/T694 ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s† GR-1089 Port Type 4 – 120VAC, 25Asc TCF250-120T TCF250-145T TCF250-180 ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 4.0kV 10/700µs† GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 230VAC, 10Ω ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s† ITU K.20/21/45 – 10A2s† GR-1089 Port Type 4 – 120VAC, 25Asc * Applies to all products which share the same prefix. † Tested with 230V gas discharge tube primary protector. 10 RoHS Compliant, ELV Compliant 189 Agency Specification/Selection Guide for Telecommunications and Networking Devices Family TRF250 Product* TRF250-055UT TRF250-080U Lightning ITU K.20 – 1.0kV 10/700µs ITU K.20 – 1.0kV 10/700µs GR-1089 Port Types 2 & 4 – 1st Level Power Cross/Contact/Induction ITU K.20 – 230VAC, 10Ω ITU K.20 – 230VAC, 10Ω ITU K.20 – 0.2A2s ITU K.20 – 1A2s† GR-1089 Port Type 4 – 120VAC, 25Asc TRF250-110U TRF250-120 TRF250-120T TRF250-120U TRF250-120UT TRF250-145 TRF250-145U TRF250-183 TRF250-184 ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 4.0kV 10/700µs‡ GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 230VAC, 10Ω ** ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s‡ ITU K.20/21/45 – 10A2s‡ GR-1089 Port Type 4 – 120VAC, 25Asc TS250/TSV250 TSV250-130F TS250-130F ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 4.0kV 10/700µs† GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 230VAC, 10Ω ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s† ITU K.20/21/45 – 10A2s† GR-1089 Port Type 4 – 120VAC, 25Asc TS250-130F-RB ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 4.0kV 10/700µs‡ GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 230VAC, 10Ω ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s‡ ITU K.20/21/45 – 10A2s‡ GR-1089 Port Type 4 – 120VAC, 25Asc TSL250 TSL250-080F GR-1089 Port Types 2 & 4 – 1st Level ITU K.20 – 1.0kV 10/700µs GR-1089 Port Type 4 – 120VAC, 25Asc ITU K.20/21/45 – 230VAC, 10Ω ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s† TRF600 TRF600-150 TR600-150F-EX TR600-150F-EX-RA-B-0.5 TRF600-160 TIA-968-A Types A & B GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† UL60950 – 600VAC, 40Asc UL60950 – 600VAC, 40Asc UL60950 – 600VAC, 40Asc Telcordia GR-1089 – 600VAC, 60Asc Telcordia GR-1089 – 600VAC, 60Asc UL60950 – 600VAC, 40Asc Telcordia GR-1089 – 600VAC, 60Asc ITU K.20/21/45 – 1.5kV 10/700µs ITU K.20/21/45 – 4.0kV 10/700µs† GR-1089 Port Types 2 & 4 – 1st Level ITU K.20/21/45 – 230VAC, 10Ω ITU K.20/21/45 – 0.2A2s ITU K.20/21/45 – 1A2s† ITU K.20/21/45 – 10A2s† GR-1089 Port Type 4 – 120VAC, 25Asc Cont’d GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level TIA-968-A Types A & B GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level†† 10 TS600 TSM600 TRF600-400 TS600-170F TS600-200F-RA TS600-400F TSM600-250F TSM600-250F-RA TSM600-400F TIA-968-A Types A & B GR-1089 Port Types 1, 3, & 5 – 1st & 2nd TIA-968-A Types A & B GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level Level†† UL60950 – 600VAC, 40Asc Telcordia GR-1089 – 600VAC, 60Asc UL60950 – 600VAC, 40Asc Telcordia GR-1089 – 600VAC, 60Asc UL60950 – 600VAC, 40Asc FT600‡‡ FT600-0500 FT600-1250 FT600-2000 TIA-968-A - Types A & B GR-1089 Port Types 1, 3, & 5 – 1st & 2nd Level Telcordia GR-1089 – 600VAC, 60Asc * † ‡ ** †† ‡‡ Applies to all products which share the same prefix. Tested with 230V gas discharge tube primary protector. Tested with 350V gas discharge tube primary protector. See SCD for additional application fault ratings. May require additional series resistor to help telecommunication equipment pass Surge 3 (1kV, 10/1000µs). See telecom fuses section. 190 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T1 Product Series: Size, Current Rating, Voltage Rating, Typical Resistance for Telecommunications and Networking Devices TS600 TSM600 600 TCF250 Voltage Rating (VAC)* (Interrupt) 250 TRF250 250 TS250 250 TSV250 250 TSL250 250 TRF600 600 Specification Hold Current (A) 0.055 0.080 0.100 0.110 0.120 0.130 0.145 0.150 0.160 0.170 0.183 0.184 0.200 0.250 0.400 ITU GR-1089 Ports 2 & 4 ITU GR-1089 Ports 2 & 4 ITU GR-1089 Ports 2 & 4 ITU GR-1089 Ports 2 & 4 GR-1089 Ports 2 & 4 UL60950 GR-1089 Ports 1, 3, & 5 UL60950 GR-1089 Ports 1, 3, & 5 — — 11.0Ω — 10.5Ω — 7.0Ω — — — — — — — — 20.0Ω 17.0Ω — 7.0Ω 8.0Ω — 4.5Ω — — — 1.3Ω 1.9Ω — — — — — — — — 9.0Ω — — — — — — — — — — — — — — 5.5Ω — — — — — — — — — — 8.0Ω — — — — — — — — — — — — — — — — — — — — — — 11.0Ω — — 8.5Ω 3.5Ω 1.2Ω — — — — — — — 8.0Ω 6.0Ω — — — — — 1.2Ω Voltage Ratings for Telecommunications and Networking Devices For Raychem circuit protection telecommunications devices there are two applicable voltage ratings. These are VMAX Operating and VMAX Interrupt. To help understand the nature of these two different voltage ratings, the following definitions are provided: VMAX Operating : For telecommunications devices this is the voltage used to obtain component recognition under UL1434. Most Raychem circuit protection devices are certified at 60V but can withstand higher VMAX Interrupt conditions as noted above. See Table T3 for its VMAX Operating. *VMAX Interrupt : Under specified conditions this is the highest voltage that can be applied to the device at the maximum current. Devices have been designed to trip safely under higher power level cross conditions, as listed above, to assist equipment in meeting the appropriate industry conditions. 10 RoHS Compliant, ELV Compliant 191 Table T2 Thermal Derating for Telecommunications and Networking Devices [Hold Current (A) at Ambient Temperature (°C)] Maximum Ambient Temperature Part Number Chip* — 250VAC TCF250 TCF250-100T TCF250-120T TCF250-145T TCF250-180‡ Radial-leaded* — 250VAC TRF250 NEW -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C 0.155 0.186 0.225 0.269 0.138 0.165 0.199 0.240 0.119 0.143 0.172 0.211 0.100 0.120 0.145 0.180 0.083 0.099 0.119 0.153 0.073 0.088 0.106 0.138 0.064 0.077 0.093 0.123 0.055 0.066 0.080 0.109 0.042 0.050 0.060 0.087 TRF250-055UT TRF250-080U TRF250-110U TRF250-120 TRF250-145 TRF250-183‡ TRF250-184‡ Surface-mount* — 250VAC TS250/TSL250/TSV250 TSL250-080F TS250-130F TSV250-130F Radial-leaded† — 600VAC TRF600 TRF600-150 TR600-150F-EX TR600-150F-EX-RA TRF600-160 0.085 0.124 0.171 0.186 0.225 0.284 0.286 0.076 0.110 0.151 0.165 0.199 0.251 0.252 0.065 0.095 0.131 0.143 0.172 0.217 0.218 0.055 0.080 0.110 0.120 0.145 0.183 0.184 0.045 0.066 0.091 0.099 0.119 0.149 0.150 0.041 0.059 0.081 0.088 0.106 0.133 0.134 0.035 0.051 0.071 0.077 0.093 0.117 0.118 0.030 0.044 0.061 0.066 0.080 0.101 0.102 0.023 0.033 0.046 0.050 0.060 0.075 0.075 NEW 0.124 0.208 0.208 0.110 0.182 0.182 0.095 0.156 0.156 0.080 0.130 0.130 0.066 0.104 0.104 0.059 0.091 0.091 0.051 0.078 0.078 0.044 0.065 0.065 0.033 0.045 0.045 0.239 0.239 0.239 0.255 0.640 0.209 0.209 0.209 0.223 0.560 0.180 0.180 0.180 0.192 0.480 0.150 0.150 0.150 0.160 0.400 0.121 0.121 0.121 0.129 0.320 0.107 0.107 0.107 0.114 0.270 0.093 0.093 0.093 0.099 0.230 0.079 0.079 0.079 0.084 0.190 0.057 0.057 0.057 0.061 0.130 NEW TRF600-400 Surface-mount† — 600VAC TS600/TSM600 TS600-170F TS600-200F-RA-B-0.5 TS600-400F TSM600-250F TSM600-250F-RA TSM600-400F 0.264 0.310 0.640 0.400 0.400 0.640 0.230 0.275 0.560 0.350 0.350 0.560 0.200 0.238 0.480 0.300 0.300 0.480 0.170 0.200 0.400 0.250 0.250 0.400 0.140 0.165 0.320 0.198 0.198 0.320 0.125 0.147 0.270 0.170 0.170 0.270 0.109 0.128 0.230 0.140 0.140 0.230 0.094 0.110 0.190 0.117 0.117 0.190 0.070 0.083 0.130 0.083 0.083 0.130 * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. ‡ Product is not currently available in a resistance matched or sorted option. Figure T1 Thermal Derating [Hold Current (A) at Ambient Temperature (°C)] 10 A B = = TCF250-180 All other TCF TRF , , TSx, TSM series devices Figure T1 200 B % of Rated Hold and Trip Current 150 A 100 A 50 B 0 -40 -20 0 20 40 60 80 Device’s Ambient Temperature (˚C) 192 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T3 Electrical Characteristics for Telecommunications and Networking Devices VMAX Operating Interrupt (VDC) (VRMS) IMAX*† Interrupt (A) Part Number Chip* — 250VAC TCF250 TCF250-100T TCF250-120T TCF250-145T TCF250-180‡ Radial-leaded* — 250VAC TRF250 NEW IH (A) IT (A) PD Typ (W) Typical Time-to-trip (A) (s) RMIN (Ω) RMAX (Ω) R1MAX (Ω) 0.100 0.120 0.145 0.180 0.150 0.240 0.290 0.650 60 60 60 60 250 250 250 250 3.0 3.0 3.0 3.0 0.6 1.0 1.0 0.9 1.0 1.0 1.0 1.0 0.2 0.6 1.5 15.5 14.0 6.3 5.0 1.0 18.0 12.0 9.0 2.2 24.0 18.0 14.0 4.0 TRF250-055UT TRF250-080T TRF250-080U TRF250-110U TRF250-120 TRF250-120T TRF250-120T-RA TRF250-120T-RC TRF250-120T-RF TRF250-120T-R1 TRF250-120T-R2 TRF250-120U TRF250-120UT TRF250-145 TRF250-145-RA TRF250-145-RB TRF250-145T TRF250-145U TRF250-183‡ TRF250-184‡ Surface-mount* — 250VAC TS250/TSL250/TSV250 TSL250-080F TS250-130F 0.055 0.080 0.080 0.110 0.120 0.120 0.120 0.130 0.120 0.120 0.120 0.120 0.120 0.145 0.145 0.145 0.145 0.145 0.183 0.184 0.170 0.160 0.160 0.220 0.240 0.240 0.240 0.260 0.240 0.240 0.240 0.240 0.240 0.290 0.290 0.290 0.290 0.290 0.685 1.000 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 100 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 10.0 10.0 0.6 0.6 0.6 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.28 0.35 0.35 1.00 1.00 0.35 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 3.00 3.00 3.0 2.5 2.5 0.8 1.5 0.7 1.2 1.5 0.9 1.0 0.8 1.0 0.7 2.5 2.5 2.0 1.5 2.0 0.6 0.5 15.0 15.0 14.0 5.0 4.0 7.0 7.0 5.4 6.0 6.0 8.0 6.0 7.0 3.0 3.0 4.5 5.4 3.5 0.8 1.2 25.0 22.0 20.0 9.0 8.0 12.0 9.0 7.5 10.5 9.0 10.5 10.0 12.0 6.0 5.5 6.0 7.5 6.5 2.2 2.4 35.0 33.0 33.0 16.0 16.0 16.0 16.0 14.0 16.0 16.0 16.0 16.0 16.0 14.0 12.0 14.0 14.0 14.0 3.4 3.1 NEW 0.080 0.130 — 0.240 0.260 — 0.260 — 0.260 — 0.260 — 0.260 80 60 60 60 60 60 60 60 60 60 250 250 600 250 600 250 600 250 600 250 3.0 3.0 1.0 3.0 1.0 3.0 1.0 3.0 1.0 3.0 1.2 1.1 — 1.1 — 1.1 — 1.1 — 1.5 1.0 1.0 — 1.0 — 1.0 — 1.0 — 1.0 0.8 0.9 — 1.4 — 0.7 — 1.1 — 2.0 5.0 6.5 — 6.5 — 9.0 — 7.0 — 4.0 11.0 12.0 — 9.0 — 12.0 — 10.0 — 7.0 20.0** 20.0** — 15.0** — 20.0** — 17.0** — 12.0** TS250-130F-RA 0.130 — TS250-130F-RB 0.130 — TS250-130F-RC 0.130 — TSV250-130F Radial-leaded† — 600VAC TRF600 TRF600-150 TRF600-150-RB TR600-150F-EX TR600-150F-EX-RA-B-0.5 TRF600-160 TRF600-160-RA TRF600-160-R1 NEW 0.130 10 0.150 0.130 0.150 0.150 0.160 0.160 0.160 0.400 0.300 0.260 0.300 0.300 0.320 0.320 0.320 1.000 250 250 250 250 250 250 250 60 600 600 600 600 600 600 600 600 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.0 1.0 1.4 1.4 1.7 1.7 1.7 2.4 1.0 1.0 1.0 1.0 1.0 1.0 1.0 3.0 1.4 1.0 5.0 5.0 7.5 9.5 9.0 4.0 6.0 9.0 6.0 7.0 4.0 4.0 4.0 0.95 10.0 12.0 12.0 10.0 10.0 7.0 8.0 1.45 17.0 22.0 22.0 20.0 18.0 16.0 17.0 1.90 TRF600-400 * † ‡ ** 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. Product is not currently available in a resistance matched or sorted option. R1MAX measured 1 hour post-trip, or 24 hours post-reflow at 20°C. RoHS Compliant, ELV Compliant 193 Table T3 Electrical Characteristics for Telecommunications and Networking Devices Part Number IH (A) IT (A) VMAX Operating Interrupt (VDC) (VRMS) IMAX*† Interrupt (A) PD Typ (W) Typical Time-to-trip (A) (s) RMIN (Ω) RMAX (Ω) Cont’d R1MAX (Ω) Surface-mount† — 600VAC TS600/TSM600 TS600-170F 0.170 0.400 0.400 1.000 0.860 0.860 1.000 60 60 60 250 250 250 600 600 600 600 600 600 3.0 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.0 2.0 2.0 2.0 1.0 1.0 3.0 3.0 3.0 3.0 10.0 12.0 5.0 0.8 1.0 5.0 4.0 4.0 0.5 1.0 1.0 0.5 9.0 7.5 1.5 3.5 3.0 1.5 18.0 13.5 2.0 7.0 5.0 2.0 TS600-200F-RA-B-0.5 0.200 TS600-400F TSM600-250F TSM600-250F-RA TSM600-400F Notes: IH IT VMAX Operating VMAX Interrupt IMAX Interrupt PD RMIN RMAX R1MAX 0.400 0.250 0.250 0.400 : Hold current: maximum current device will pass without interruption in 20°C still air. : Trip current: minimum current that will switch the device from low resistance to high resistance in 20°C still air. : Maximum continuous voltage device can withstand without damage at rated current. This voltage is used for component recognition under UL1434. : Maximum voltage that can be safely placed across a device in its tripped state. Devices have been designed to trip safely under higher level power cross conditions to assist equipment in meeting the appropriate ITU, UL60950, or GR1089 industry requirements. : Maximum fault current device can withstand without damage at rated operating voltage. This current is used for component recognition under UL1434. Devices have been designed to trip safely under higher level power cross conditions to assist equipment in meeting the appropriate ITU, UL60950, or GR1089 industry requirements. : Power dissipated from device when in the tripped state in 20°C still air. : Minimum resistance of device as supplied at 20°C unless otherwise specified. : Maximum resistance of device as supplied at 20°C unless otherwise specified. : Maximum resistance measured one hour post-trip or post-reflow at 20°C. * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. Warning : • Users should independently evaluate the suitability of and test each product selected for their own application. • Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. • These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. • Contamination of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. • Device performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic components. • PPTC devices are not recommended for installation in applications where the device is constrained such that its PTC properties are inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion. • Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device. 10 Figure T2-T13 Dimension Figures for Telecommunications and Networking Devices Figure T2 A C Figure T3 A C Figure T4 A C B B B D E E C to C LL C to C LL D 194 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Figure T2-T13 Dimension Figures for Telecommunications and Networking Devices Figure T5 Figure T6 A C Cont’d Figure T7 C B D B F B D E D A E D C E A Figure T8 Figure T9 C C F B E A D F D A D E G E B Figure T10 A C Figure T11 A C Figure T12 A C B B B D D E C to C L L E C to C L L D E C L to C L 10 Figure T13 A C B D E C to C LL RoHS Compliant, ELV Compliant 195 Table T4 Dimensions for Telecommunications and Networking Devices in Millimeters (Inches) A Part Number TCF 250V* TCF250-100T 4.6 (0.18) TCF250-120T 5.4 (0.21) TCF250-145T 5.4 (0.21) TCF250-180 6.9 (0.27) TRF250 250V* NEW B Max. Min. Max. Min. C Max. Min. D Max. Min. E Max. Min. F Max. Min. G Max. Figure Min. 4.9 (0.19) 5.6 (0.22) 5.6 (0.22) 7.1 (0.28) 4.6 (0.18) 5.4 (0.21) 5.4 (0.21) 6.9 (0.27) 4.9 (0.19) 5.6 (0.22) 5.6 (0.22) 7.1 (0.28) 2.0 (0.08) 2.0 (0.08) 2.0 (0.08) 1.3 (0.05) 2.3 (0.09) 2.3 (0.09) 2.5 (0.10) 1.6 (0.06) — — — — — — — — T4 — — — — — — — — T4 — — — — — — — — T4 — — — — — — — — T4 TRF250-055UT — 4.8 (0.19) — 9.3 (0.37) — 3.8 (0.15) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) — 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) 5.0‡ (0.20) — — — — — T2 TRF250-080T — 5.8 (0.23) — 9.9 (0.39) — 4.6 (0.18) — — — — — — T2 TRF250-080U — 4.8 (0.19) — 9.3 (0.37) — 3.8 (0.15) — — — — — — T11 TRF250-110U — 5.3 (0.21) — 9.4 (0.37) — 3.8 (0.15) — — — — — — T11 TRF250-120 — 6.5 (0.26) — 11.0 (0.43) — 4.6 (0.18) — — — — — — T3 TRF250-120U — 6.0 (0.24) — 10.0 (0.39) — 3.8 (0.15) — — — — — — T10 TRF250-145 — 6.5 (0.26) — 11.0 (0.43) — 4.6 (0.18) — — — — — — T3 TRF250-145U — 6.0 (0.24) — 10.0 (0.39) — 3.8 (0.15) — — — — — — T10 TRF250-183 NEW — 7.5 (0.29) — 10.5 (0.41) — 4.1 (0.16) — — — — — — T2 TRF250-184 — 7.7 (0.30) — 10.5 (0.41) — 4.6 (0.18) — — — — — — T12 TS250/TSL250/TSV250 250V* TSL250-080F 6.7 (0.27) TS250-130F 8.5 (0.34) TSV250-130F — 7.9 (0.31) 9.4 (0.37) 6.1 (0.24) TRF600 600V† TRF600-150 — 9.0 (0.35) TR600-150F-EX — 13.5 (0.53) TR600-150F-EX-RA-B-0.5 — 13.5 (0.53) TRF600-160 — 16.0 (0.63) NEW 2.7 (0.11) — 3.7 (0.15) 3.4 (0.14) 4.8 (0.19) — 5.3 (0.21) 7.4 (0.29) 0.2 (0.01) 0.3‡ (0.01) 0.56 (0.02) 0.4 (0.02) — 2.5 3.8‡ (0.15) 3.1 — — — — T7 (0.10) (0.12) — — — — — T5 — 6.9 (0.27) — 3.2 (0.13) — — 1.9 (0.08) 1.6 2.3 — — T6 10 (0.07) (0.09) — 12.5 (0.49) — 4.6 (0.18) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) 4.7 (0.19) — 5.0 (0.20) — — 9.0 (0.35) — — T3 — 12.6 (0.50) — 6.0 (0.18) — 5.0 (0.20) — — — — — T3 — 12.6 (0.50) — 6.0 (0.18) — 5.0 (0.20) 5.0‡ (0.20) 5.0‡ (0.20) — — — — — T3 — 12.6 (0.50) — 6.0 (0.24) — — — 10.0 (0.39) — — T3 TRF600-400 — 14.8 (0.58) — 13.1 (0.52) — 4.6 (0.18) — — — — — — T13 * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. ‡ Indicates dimension is typical, not minimum. 196 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T4 Dimensions for Telecommunications and Networking Devices in Millimeters (Inches) A Part Number TS600/TSM600 600V† TS600-170F 18.3 (0.72) TS600-200F-RA 18.3 (0.72) TS600-400F 18.3 (0.72) TSM600-250F 17.00 (0.67) TSM600-250F-RA 17.00 (0.67) TSM600-400F 17.00 (0.67) 19.4 (0.77) 19.4 (0.77) 19.4 (0.77) 17.60 (0.69) 17.60 (0.69) 17.60 (0.69) 11.6 (0.46) 11.6 (0.46) 11.6 (0.46) 11.20 (0.44) 11.20 (0.44) 11.20 (0.44) 12.3 (0.49) 12.3 (0.49) 12.3 (0.49) 11.70 (0.46) 11.70 (0.46) 11.70 (0.46) 7.2 (0.29) 7.2 (0.29) 7.2 (0.29) 10.40 (0.41) 10.40 (0.41) 10.40 (0.41) 8.3 (0.33) 8.3 (0.33) 8.3 (0.33) 11.20 (0.44) 11.20 (0.44) 11.20 (0.44) 1.7 (0.07) 1.7 (0.07) 1.7 (0.07) 4.80 (0.19) 4.80 (0.19) 4.80 (0.19) 2.4 (0.10) 2.4 (0.10) 2.4 (0.10) 5.20 (0.20) 5.20 (0.20) 5.20 (0.20) 9.9 10.4 1.5 2.3 — — T8 Min. Max. Min. B Max. Min. C Max. Min. D Max. Min. E Max. Min. F Max. Min. G Max. Cont’d Figure (0.39) (0.41) 9.9 10.4 (0.06) (0.09) 1.5 2.3 — — T8 (0.39) (0.41) 9.9 10.4 (0.06) (0.09) 1.5 2.3 — — T8 (0.39) (0.41) 2.50 2.80 (0.06) (0.09) 0.60 1.0 2.2 (0.09) 2.2 (0.09) 2.2 (0.09) 3.1 (0.12) 3.1 (0.12) 3.1 (0.12) T9 T9 T9 (0.10) (0.11) 2.50 2.80 (0.02) (0.04) 0.60 1.0 (0.10) (0.11) 2.50 2.80 (0.02) (0.04) 0.60 1.0 (0.10) (0.11) (0.02) (0.04) † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. Figure T14-T17 Typical Time-to-trip Curves at 20°C for Telecommunications and Networking Devices Figure T14 100 TCF250 A = TCF250-180 B = TCF250-145T C = TCF250-120T D = TCF250-100T A 10 B C Time-to-trip (s) D 1 A 0.10 B C D 0.01 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 Fault Current (A) TRF250 A = TRF250-180/183/184 B = TRF250-145/145U C = TRF250-120/120U D = TRF250-110U/120UT/120T E = TRF250-080T/080U/080US Figure T15 1000 10 A 100 B C Time-to-trip (s) 10 E D 1 A B C D E 0.01 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 0.10 Fault Current (A) RoHS Compliant, ELV Compliant 197 Figure T14-T17 Typical Time-to-trip Curves at 20°C for Telecommunications and Networking Devices Figure T16 100 Cont’d TS250/TSV250/TSL250 A = TSV250-130F B = TS250-130F C = TSL250-080F 10 A B C Time-to-trip (s) 1 0.10 A B C 0.01 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Fault Current (A) Time-to-trip (s) TRF600/TS600/TSM600 A = TRF600-400/TS600-400/ TSM600-400F B = TSM600-250F/ TS600-170F/200F C = TRF600-160 D = TR600-150F-EX E = TRF600-150 Figure T17 1000 CB 100 D E A 10 A 1 B C D E 0.10 0 1 2 3 4 5 6 7 Fault Current (A) Table T5 15 10 Physical Characteristics and Environmental Specifications for Telecommunications and Networking Devices Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C) TCF250* Physical Characteristics Terminal material Nickel-plated copper foil Environmental Specifications Test Passive aging Humidity aging Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 1000 hours 125°C, -55°C (10 times) MIL-STD-202, Method 215F Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. 198 RoHS compliant, ELV compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T5 Physical Characteristics and Environmental Specifications for Telecommunications and Networking Devices Cont’d Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C) TRF250* Physical Characteristics Lead material Insulating material Flammability Soldering characteristics Solder heat withstand Tin-plated copper, 22AWG Cured epoxy polymer per IEC 695-2-2 Needle Flame Test for 20s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C Note: Devices are not designed to be placed through a reflow process. Environmental Specifications Test Passive aging Humidity aging Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 1000 hours 125°C, -55°C (10 times) MIL-STD-202, Method 215F Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. TS250/TSV250/TSL250* Physical Characteristics Terminal material Soldering characteristics Tin-plated brass, Nickel under-plating EIC 60008-2-58 Environmental Specifications Test Passive aging Humidity aging Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 500 hours 125°C, -55°C (10 times) MIL-STD-202, Method 215F Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. TRF600† Physical Characteristics Lead material Insulating material Flammability Soldering characteristics Solder heat withstand Tin-plated copper, 22AWG Cured epoxy polymer‡ per IEC 695-2-2 Needle flame test for 20s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A, Condition B: can withstand 10 seconds at 260°C±5°C 10 Note: Devices are not designed to be placed through a reflow process. Environmental Specifications Test Passive aging Humidity aging Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 1000 hours‡ 125°C, -55°C (10 times) MIL-STD-202, Method 215F Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. ‡ Excluding TRF600-150 and TRF600-400, which have a coating that is not rated for dielectric withstand and can withstand 500h at 85°C/85% RH or 1000h at 60°C/90% RH. RoHS Compliant, ELV Compliant 199 Table T5 Physical Characteristics and Environmental Specifications for Telecommunications and Networking Devices Cont’d Operating temperature range for all listed products is -40°C to 85°C, except for TRF250-080T and TRF250-184 (0°C to 85°C) TS600† Physical Characteristics Terminal material Insulating material Flammability Soldering characteristics Solder heat withstand Tin-plated brass Nylon resin (UL94V-0), 1000V dielectric rating IEC 695-2-2 Needle Flame Test for 20s ANSI/J-STD-002, Category 3 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A Environmental Specifications Test Passive aging Humidity aging Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 1000 hours 125°C, -55°C (10 times) MIL-STD-202, Method 215F Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. TSM600† Physical Characteristics Terminal material Insulating material Flammability Soldering characteristics Solder heat withstand Tin-plated brass Nylon resin (UL94V-0), 1000V dielectric rating IEC 695-2-2 Needle Flame Test for 20s EIC60068-2-58, Method 7 IEC-STD 68-2-20, Test Tb, Section 5 Method 1A Environmental Specifications Test Passive aging Humidity aging Storage humidity Thermal shock Solvent resistance Conditions 60°C, 1000 hours 85°C, 1000 hours 85°C, 85% RH, 1000 hours Per IPC/JEDEC J-STD-020A Level 2a 125°C, -55°C (10 times) MIL-STD-202, Method 215J Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use. Devices may not meet specified values if these storage conditions are exceeded. 10 † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. 200 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T6 Packaging and Marking Information for Telecommunications and Networking Devices Bag Quantity Tape & Reel Quantity Standard Package Quantity Part Number Chip* — 250VAC TCF250 TCF250-100T TCF250-120T TCF250-145T TCF250-180 Radial-leaded* — 250VAC TRF250 NEW Part Marking Agency Recognition 2,500 2,500 2,500 2,500 — — — — 10,000 10,000 10,000 10,000 — — — — — — — UL TRF250-055UT TRF250-080U TRF250-080U-2 TRF250-080T TRF250-110U TRF250-120 TRF250-120-2 TRF250-120T TRF250-120T-2 TRF250-120U TRF250-120U-2 TRF250-120UT TRF250-145 TRF250-145-2 TRF250-145-RA TRF250-145U TRF250-145U-2 TRF250-183 TRF250-183-2 500 500 — 500 500 500 — 500 — 500 — 500 500 — 500 500 — 500 — 500 — — 1,500 — — — 1,500 — 1,500 — 1,500 — — 1,500 — — 1,500 — 1,500 — 10,000 10,000 7 ,500 10,000 10,000 10,000 7 ,500 10,000 7 ,500 10,000 7 ,500 10,000 10,000 7 ,500 10,000 10,000 7 ,500 10,000 7 ,500 10,000 — — — 08F — 20F 20F 20F 20F 20F 20F 20F 45F 45F 45F 45F 45F 83F 83F 84F — UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV UL, CSA, TÜV NEW TRF250-184 Surface-mount* — 250VAC TS250/TSL250/TSV250 TSL250-080F-2 TS250-130F-2 TSV250-130F-2 Radial-leaded† — 600VAC TRF600 TRF600-150 TRF600-150-2 TR600-150F-EX TR600-150F-EX-2 TR600-150F-EX-RA-B-0.5 TRF600-160 TRF600-160-2 — — — 1,500 1,500 1,200 7 ,500 7 ,500 6,000 T08 T13 T13V UL, CSA,TÜV UL, CSA, TÜV UL, CSA, TÜV 500 — 500 — 500 500 — 500 — 1,500 — 600 — — 600 — 10,000 7 ,500 10,000 3,000 10,000 10,000 3,000 10,000 150F 150F 150F 150F 150F 160F 160F 400F UL, CSA, TÜV UL, CSA, TÜV UL, CSA UL, CSA UL, CSA UL, CSA, TÜV UL, CSA, TÜV UL, CSA 10 NEW TRF600-400 Surface-mount† — 600VAC TS600/TSM600 TS600-170F-2 TS600-200F-RA-2 TS600-400F-2 TSM600-250F-2 TSM600-250F-RA-2 TSM600-400F-2 — — — — — — 300 300 300 200 200 200 900 900 900 1,000 1,000 1,000 T20 T20 T40 TSM600 TSM600 TSM600 UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL * 250VAC interrupt products are designed to help equipment pass ITU K.20, K.21, & K.45 recommendations and Telcordia GR-1089 Port Type 2 & 4 requirements. † 600VAC interrupt products are designed to help equipment pass UL60950, TIA-968-A and GR1089 Port Type 1, 3 & 5 requirements. RoHS Compliant, ELV Compliant 201 Agency Recognition for Telecommunications and Networking Devices UL CSA TÜV File # E74889 File #78165C Per IEC60730-1 Certificate # for individual products available upon request. Table T7 Device TS250 (All) TSV250 (All) TSL250 (All) TS600 (All) TSM600 (All) Recommended Pad Layouts for Surface-mount Telecommunications and Networking Devices in millimeters (inches) Nominal A 4.60 (0.180) 2.29 (0.090) 3.60 (0.140) 10.42 (0.410) 5.20 (0.205) B 1.80 (0.070) 2.41 (0.095) 1.80 (0.070) 3.30 (0.130) 17.80 (0.701) C 6.10 (0.240) 6.35 (0.250) 5.50 (0.220) 3.35 (0.132) 5.54 (0.218) D — — 3.43 (0.135) — — — — 6.75 (0.266) E — — — — — — — — 2.08 (0.082) F — — — — — — — — 3.12 (0.123) G — — — — — — — — 8.39 (0.331) Figure T18 T19 T18 T18 T20 Figure T18 Figure T19 Figure T20 B A A B B C B C B A D A EG F C D Solder Reflow and Rework Recommendations for Telecommunications Surface-mount Devices Profile Feature Average ramp up rate (TsMAX to Tp) Preheat • Temperature min. (TsMIN) • Temperature max. (TsMAX) • Time (tsMIN to tsMAX) Time maintained above: • Temperature (TL) • Time (tL) Peak/Classification temperature (Tp) Time within 5°C of actual peak temperature Time (tp) Ramp down rate Time 25°C to peak temperature Pb-Free Assembly 3°C/second max. 150°C 200°C 60-180 seconds Temperature Figure T21 tp Tp Ramp up TL Critical Zone TL to Tp TsMAX tL 10 217°C 60-150 seconds 260°C 20-40 seconds 6°C/second max. 8 minutes max. TsMIN ts Preheat Ramp down 25 Reflow Profile t 25˚C to Peak Time Note: All temperatures refer to topside of the package, measured on the package body surface. Solder Reflow • Recommended reflow method: IR, vapor phase oven, hot air oven. • Surface-mount devices are not designed to be wave soldered to the bottom side of the board. • Recommended maximum paste thickness of 0.25mm (0.010 in). • Devices can be cleaned using standard industry methods and solvents. Rework • If a device is removed from the board, it should be discarded and replaced with a new device. 202 RoHS compliant, ELV compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Wave Soldering and Rework Recommendations for Telecommunications Radial-leaded Devices Recommended Wave Soldering • Soldering temperature profile Temperature characteristic at component terminal with dual wave soldering Rework • If a device is removed from the board, it should be discarded and replaced with a new device. Figure T22 300 250 245˚C ... 260˚C Temperature (˚C) 200 150 100 50 0 100˚C ... 130˚C Forced cooling 10s 0 50 100 Time (s) 150 200 250 Table T8 TRF250/TRF600 Tape and Reel Specifications for Telecommunications and Networking Device TRF250/TRF600 devices are available in tape and reel packaging per EIA 468-B standard. See Figures T23 and T24 for details. Dimension Description Carrier tape width Hold down tape width Top distance between tape edges Sprocket hole position Sprocket hole diameter Abcissa to plane (straight lead) Abcissa to plane (kinked lead)* Abcissa to top Overall width with lead protrusion Overall width without lead protrusion Lead protrusion Protrusion of cut-out Protrusion beyond hold down tape Sprocket hole pitch Device pitch (TRF250 & TRF600-150) Device pitch (TRF600-160/400) Pitch tolerance Tape thickness Tape thickness with splice* Splice sprocket hole alignment Body lateral deviation Body tape plane deviation Lead spacing plane deviation Lead spacing* Reel width Reel diameter Space between flanges less device Arbor hole diameter Core diameter Box Consecutive missing pieces* Empty places per reel* * Differs from EIA specification. EIA Mark W W4 W6 W5 D0 H H0 H1 — — L1 L I2 P0 — — — t t1 — h p P1 F w2 a w1 c n — — — IEC Mark W W0 W2 W1 D0 H H0 H1 C1 C2 I1 L I2 P0 — — — t — — h p P1 F w d — f h — — — Dimension (mm) 18 5 3 9 4 18.5 16 32.2 43.2 42.5 1.0 11 Not specified 12.7 12.7 25.4 20 consecutive 0.9 2.0 0 0 0 0 5.08 56 370 4.75 26 80 56/372/372 3 maximum Not specified Tolerance -0.5/+1.0 Minimum Maximum -0.5/+0.75 ±0.2 ±3.0 -0.5/+0.6 Maximum Maximum Maximum Maximum Maximum — ±0.3 — — ±1 Maximum Maximum ±0.3 ±1.0 ±1.3 ±0.7 ±0.6 Maximum Maximum ±3.25 ±12.0 Maximum Maximum — — 10 RoHS Compliant, ELV Compliant 203 Figure T23 EIA Referenced Taped Component Dimensions for TRF Devices p p h h Reference plane H1 P1 F L A B W4 H0 W5 W I2 L1 P0 D0 Direction of unreeling H H1 C1 C2 Cross section A-B t Figure T24 Reel Dimensions for TRF Devices Reel Upper side n Type a Direction of unreeling Lower side c w1 w2 Cross section Optional shape: Circular or polygonal 10 204 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Table T9 TS Tape and Reel Specifications for Telecommunications and Networking Devices TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details. TS250/TSL250/TSV250 Dimension Description Carrier tape width Sprocket hole pitch EIA Mark W P0 P1 P2 A0 B0 B1 max. Sprocket hole diameter D0 F E1 E2 min. Tape thickness Tape thickness with splice cover tape thickness T max. T1 max. K0 Leader min. Trailer min. TS250 Dimension(mm) Tolerance(mm) 16 4.0 12.0 2.0 6.9 9.6 12.1 1.5 7.5 1.75 14.25 0.4 0.1 3.4 300 300 ±0.30 ±0.10 ±0.10 ±0.10 ±0.23 ±0.15 — -0/+0.1 ±0.10 ±0.10 — — — ±0.15 — — TSV250 Dimension(mm) Tolerance(mm) 16.0 4.0 8.0 2.0 5.5 6.2 8.0 1.55 7.5 1.75 — 0.45 0.1 7.0 390 160 ±0.30 ±0.10 ±0.10 ±0.10 ±0.10 ±0.10 — ±0.05 ±0.10 ±0.10 — — — ±0.10 — — TSL250 Dimension(mm) Tolerance(mm) 16 4.0 8.0 2.0 5.5 7.9 9.2 1.55 7.5 1.75 — 0.35 0.1 3.70 390 160 ±0.30 ±0.10 ±0.10 ±0.10 ±0.10 ±0.10 — ±0.05 ±0.10 ±0.10 — — — ±0.10 — — Reel dimensions Reel diameter Core diameter Space between flanges less device Reel width A max. N min. W1 W2 max. 340 50 16.4 22.4 — — -0/+2.0 — 340 50 16.4 22.4 — — -0/+2.0 — 340 50 16.4 22.4 — — -0/+2.0 — TS600 Dimension Description Carrier tape width Sprocket hole pitch EIA Mark W P0 P1 P2 A0 B0 B1 max. Sprocket hole diameter D0 F E1 E2 min. Tape thickness Tape thickness with splice T max. T1 max. K0 Leader min. Trailer min. Dimension (mm) 32 4.0 16 2.0 10 19.2 21.6 1.5 14.2 1.75 28.4 0.50 0.1 13.2 390 160 ±0.1 -0/+1.0 ±0.1 ±0.1 ±0.1 ±0.5 Tolerance ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 10 Reel Dimensions Reel diameter Core diameter Space between flanges less device Reel width A max. N min. W1 W2 max. 360 50 32.4 40 -0/+2.0 RoHS Compliant, ELV Compliant 205 Table T9 TS Tape and Reel Specifications for Telecommunications and Networking Devices TS devices are packaged per EIA 481 and EIA 481-2 standards. See Figures T25 and T26 for details. Cont’d TSM600 Dimension Description Carrier tape width Sprocket hole pitch EIA Mark W P0 P1 P2 A0 B0 B1 max. Sprocket hole diameter D F E1 E2 max. Tape thickness Tape thickness with splice T max. T1 max. K0 Leader min. Trailer min. Reel Dimensions Reel diameter Core diameter Space between flanges less device Reel width A max. N min. W1 W2 max. 360 50 32.4 40 -0/+2.0 Dimension (mm) 32 4.0 24 2.0 11.2 17.8 23.45 1.5 14.2 1.74 28.4 0.5 0.1 11.9 390 160 ±0.1 -0/+1.0 ±0.1 ±0.1 ±0.1 ±0.5 Tolerance ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 Figure T25 EIA Referenced Taped Component Dimensions for TS Devices P0 T D0 P2 E1 Cover tape A0 Embossment F E2 B0 W B1 K0 10 T1 Center lines of cavity P1 Figure T26 EIA Referenced Reel Dimensions for TS Devices W2 (measured at hub) Cover tape A N (hub dia.) Carrier tape Embossed cavity W1 (measured at hub) 206 RoHS Compliant, ELV Compliant PolySwitch Resettable Devices – Telecommunications & Networking Devices Resistance-sorted and Resistance-matched Devices Most TCF TRF and TS devices are available in resistance-sorted and/or resistance-matched versions. , Resistance-sorted Devices Resistance-sorted devices (part number suffix “Rx” where x = 1, 2, A, B, C, F etc.) are supplied with resistance values that are within , specified segments of the device’s full range of resistance. Feature • Narrow resistance range. Benefits • Greater flexibility for design engineers. • Lower resistance devices can allow for increased loop length on line card designs. • Higher resistance devices may provide greater protection by offering faster time-to-trip. Resistance-matched Devices Resistance-matched devices are supplied such that all parts in one particular package (or reel) are within 0.5Ω of each other (1.0Ω for TRF250-080T devices). Individual matched packages are supplied from the full resistance range of the specified device. Feature • Tighter resistance balance between any two parts in a package. Benefits • Resistance-matched devices may reduce the tip-ring resistance differential, reducing the possibility of line imbalance. Part Numbering System for Radial-leaded Telecommunications and Networking Devices TRF*250 -120 T -RA -B-0.5 -2 Packaging 2 = Tape and Reel 0.130 = special lead length in inches (Blank) = Bulk B-x.x = Resistance matched in bins of x.xΩ (optional) Rx = Resistance range (optional) Modifier (optional) U = Uncoated S = Straight lead T = Fast Trip device Hold Current (mA) Product Series (TRF250, TRF600) * F = RoHS compliant, ELV compliant 10 Part Numbering System for Surface-mount Telecommunications and Networking Devices TSx -200 F -RA -B-0.5 -2 Packaging 2 = Tape and Reel (Blank) = Bulk B-x.x = Resistance matched in bins of x.xΩ (optional) Rx = Resistance range (optional) F = RoHS Compliant, ELV Compliant Hold Current (mA) Product Series (TS250, TSV250, TSL250, TS600, TSM600) RoHS Compliant, ELV Compliant 207 Part Numbering System for Chip Telecommunications and Networking Devices TCF*250 -120 T -RA -B-0.5 B-x.x = Resistance matched in bins of x.xΩ (optional) Rx = Resistance range (optional) Modifier (optional) T = Fast Trip device Hold Current (mA) Product Series * F = RoHS compliant, ELV compliant 10 208 RoHS Compliant, ELV Compliant