RSD-100B-24

100W Railway Single Output DC-DC Converter Features : 2:1 wide input range RSD-100 series Protections: Short circuit / Overload / Over voltage / Input reverse polarity 4000VDC I/O isolation Cooling by free air convection Built-in constant current limiting circuit 1U low profile 36mm Compliance to EN50155 railway certificate All using 105 long life electrolytic capacitors LED indicator for power on 100% full load burn-in test 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT CONTINUOUS 1 SEC. EFFICIENCY (Typ.) DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) RSD-100B-5 RSD-100B-12 RSD-100B-24 RSD-100C-5 RSD-100C-12 RSD-100C-24 RSD-100D-5 RSD-100D-12 RSD-100D-24 5V 20A 0 ~ 20A 100W 2.0% 0.5% 1.0% 12V 8.4A 0 ~ 8.4A 100.8W 120mVp-p 2.0% 0.3% 1.0% 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p 2.0% 0.2% 1.0% 5V 20A 0 ~ 20A 100W 100mVp-p 2.0% 0.5% 1.0% 12V 8.4A 0 ~ 8.4A 100.8W 120mVp-p 2.0% 0.3% 1.0% 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p 2.0% 0.2% 1.0% 5V 20A 0 ~ 20A 100W 100mVp-p 2.0% 0.5% 1.0% 12V 8.4A 0 ~ 8.4A 100.8W 120mVp-p 2.0% 0.2% 1.0% 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p 2.0% 0.2% 1.0% RIPPLE & NOISE (max.) Note.2 100mVp-p 800ms, 50ms at full load 3 ~ 30ms @ full load ; B/C- type comply with S1 level ; D-type comply with S2 level 16.8 ~ 31.2VDC 14.4 ~ 33.6VDC 88% 4.8A/24V 30A/24VDC 89% 4.8A/24V 89% 4.8A/24V 33.6 ~ 62.4VDC 28.8 ~ 67.2VDC 89% 2.4A/48V 30A/48VDC 91% 2.4A/48V 91% 2.4A/48V 67.2 ~ 143VDC 57.6 ~ 154VDC 89.5% 1.2A/110V 30A/110VDC 91% 1.2A/110V 90% 1.2A/110V 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V 5.75 ~ 7V 13.8 ~ 16.2V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -40 ~ +55 (no derating) ; +70 @ 60% load by free air convection ; +70 20 ~ 95% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ; Mounting : compliance to IEC61373 Design refer to IEC60950-1, EN50155 (IEC60571) I/P-O/P:4KVDC I/P-FG:2.5KVDC O/P-FG:2.5KVDC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Conduction Emission: Class A, Radiation Emission: Class B ; EN50155(EN50121-3-2) Compliance to EN61000-4-2,3,4,6,8; ENV50204, EN50155(EN50121-3-2), light industry level, criteria A 254.1K hrs min. MIL-HDBK-217F (25 161*68*36mm (L*W*H) 0.6Kg; 24pcs/15.4Kg/0.98CUFT ) (no derating with external base plate) EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RSD-100-SPEC 2011-05-18 100W Railway Single Output DC-DC Converter Mechanical Specification 12max. RSD-100 Case No.999A 12max. series Unit:mm 5 156 2.5 161 156 LED 2.5 I/P O/P 1 9.5 1 2 3 8.2 4-R1.75 Input Terminal Pin No. Assignment : Pin No. 1 2 3 Assignment DC INPUT V+ DC INPUT VFG Output Terminal Pin No. Assignment : Pin No. 1 2 Assignment DC OUTPUT -V DC OUTPUT +V Block Diagram RECTIFIERS & FILTER RECTIFIERS & FILTER 55 68 2 6.5 36 2-R 1.7 25 fosc : 130KHz I/P EMI FILTER POWER SWITCHING +V -V FG O.L.P. PWM CONTROL O.V.P. DETECTION CIRCUIT Derating Curve 100 Static Characteristics(RSD-100D-24) 32 28 350 300 250 200 150 100 50 80 No base plate 60 24 20 16 12 8 LOAD (%) 40 Have base plate 360 360 2mm 20 -40 0 10 20 30 40 50 55 60 70 (HORIZONTAL) 57.6 60 65 85 95 105 115 125 135 145 154 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) File Name:RSD-100-SPEC 2011-05-18 OUTPUT RIPPLE (mVp-p) OUTPUT VOLTAGE (V)