Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared
Sensors
Cat.No.S21E-8
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for EU RoHS Compliant
•
•
•
All the products on this catalog are complied with EU RoHS.
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
S21J.pdf
2012.10.1
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CONTENTS
1
HIC® in this catalog are the trademarks of
Murata Manufacturing Co., Ltd.
Part Numbering
2
1
SMD-Dual / Parallel Quad Type Pyroelectric Infrared Sensor IRS Series
3
2
Dual Type Pyroelectric Infrared Sensor IRA-E700 Series
6
3
Quad Type Pyroelectric Infrared Sensor IRA-E900 Series
7
Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data
8
Lens
11
Notice
21
2
3
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Numbering
Pyroelectric Infrared Sensor
(Part Number)
IR
S- B210ST 01 -R1
❶
❷
❸
❹
❺
❶Product ID
❷Type
❸Characteristics
❹Individual Specification Code
* Part Number shows only an example which might be different
from actual part number.
* "❸Characteristics" and "❹Individual Specification Code" might
have different digit number from actual Part Number.
2
S21J.pdf
2012.10.1
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors for Reflow Soldering
1
SMD-Dual Type Pyroelectric Infrared Sensor IRS-B210ST01 Series
SMD type Pyroelectric infrared sensors, IRS series, exhibit
high sensitivity and reliable performance made possible by
Murata's ceramic technology and packaging technology
developed over many years.
IRS-B series is approximately 50% smaller in volume and
10% thinner than our previous surface mount model.
Compared with common lead-type models, it is significantly
smaller with a lower profile approximately 20% less in
volume and 50% less in thickness than the former.
▊Features
& Circuit Diagrams
4.7
3.8
4.7
3.8
(3)
(2)
(1)
(5)
4.9
0.5
Power Supply
Terminal
(Vin)
GND
0.6
0.6
1.9
1.0
2.5
0.4
Out Put Terminal
(Vout)
General Tolerance: ±0.2
(in mm)
0.80
1.20
2.50
0.9
(4)
3.3
1. Human detection
2. TV
3. Air conditioning
4. Digital photo-frame
5. Personal computers
6. Automatic switches for lighting equipment
7. WEB cameras (IP cameras)
8. Automatic warm water cleaning toilet seats
9. Security devices
10. Other automatic switches
(ex. :LCD monitors, Air purifiers, Ventilation fans)
11. Home electronics for Eco
1.4
0.3
2.4
0.5
▊Applications
▊Rating
▊Dimensions
01X
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade
(4.7×4.7×2.4mm)
3. High sensitivity
4. Achieves superior electromagnetic noise resistance
characteristics
(25˚C)
Part Number
Responsivity (500K, 1Hz, 1Hz)
IRS-B210ST01
3.6mVp-p (Typ.)
Field of View
θ1=70° θ2=50°
Optical Filter
3μm long-pass
Electrode
Supply Voltage
(in mm)
−
d(Vin)
2 to 15V
Operating Temperature
-40 to 70℃
Storage Temperature
-40 to 85℃
s(Vout)
(RG)
g(GND)
3
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors for Reflow Soldering
1
Parallel Quad Type Pyroelectric Infrared Sensor IRS-B340ST02 Series
SMD type Pyroelectric infrared sensors, IRS series, exhibit
high sensitivity and reliable performance made possible by
Murata's ceramic technology and packaging technology
developed over many years.
IRS-B series is approximately 50% smaller in volume and
10% thinner than our previous surface mount model.
Compared with common lead-type models, it is significantly
smaller with a lower profile approximately 20% less in
volume and 50% less thickness than the former.
▊Features
3.6mVp-p (Typ.)
θ1=70° θ2=50°
Optical Filter
3μm long-pass
Supply Voltage
0.3
4.7
3.8
(3)
(2)
(1)
(5)
4.9
0.5
Power Supply
Terminal
(Vin)
GND
1.0
2.5
0.6
0.6
General Tolerance: ±0.2
(in mm)
1.10
1.35
0.40
3.3
0.4
Out Put Terminal
(Vout)
1.9
0.9
(4)
IRS-B340ST02
Field of View
Electrode
1.4
1.10
(25˚C)
Responsivity (500K, 1Hz, 1Hz)
4.7
3.8
2.4
2.60
1. Human detection
2. TV
3. Air conditioning
4. Digital photo-frame
5. Personal computers
6. Automatic switches for lighting equipment
7. WEB cameras (IP cameras)
8. Automatic warm water cleaning toilet seats
9. Security devices
10. Other automatic switches
(ex. :LCD monitors, Air purifiers, Ventilation fans)
11. Home electronics for Eco
Part Number
& Circuit Diagrams
0.5
▊Applications
▊Rating
▊Dimensions
02X
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade
(4.7×4.7×2.4mm)
3. High sensitivity
4. Achieves superior electromagnetic noise resistance
characteristics
0.475
0.40
0.475
(in mm)
−
2 to 15V
Operating Temperature
-40 to 70℃
Storage Temperature
-40 to 80℃
d (Vin)
s (Vout)
(RG)
g (GND)
4
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors for Reflow Soldering
1
Parallel Quad Type Pyroelectric Infrared Sensor IRS-B345ST03 Series
SMD type Pyroelectric infrared sensors, IRS series, exhibit
high sensitivity and reliable performance made possible by
Murata's ceramic technology and packaging technology
developed over many years.
IRS-B series is approximately 50% smaller in volume and
10% thinner than our previous surface mount model.
Compared with common lead-type models, it is significantly
smaller with a lower profile approximately 20% less in
volume and 50% less thickness than the former.
▊Features
▊Dimensions
& Circuit Diagrams
4.7
3.8
4.7
3.8
(3)
(2)
(1)
(5)
4.9
GND
0.6
1.9
1.0
2.5
General Tolerance: ±0.2
(in mm)
0.6
2.6
+
1.025
3.3
0.4
Out Put Terminal
(Vout)
+
2.05
1. Human detection
2. TV
3. Air conditioning
4. Degital photo-frame
5. Parsonal computers
6. Automatic switches for lighting equipment
7. WEB cameras (IP cameras)
8. Automatic warm water cleaning toilet seats
9. Security devices
10. Other automatic switches
(ex. :LCD monitors, Air purifiers, Ventilation fans)
11. Home electronics for ECO
0.5
Power Supply
Terminal
(Vin)
–
–
0.325
0.9
(4)
0.5
▊Applications
1.4
0.3
2.4
03X
1. Reflow surface-mounting support
2. Smallest and ultra-thin throughout the trade
(4.7×4.7×2.4mm)
3. High sensitivity
4. Achieves superior electromagnetic noise resistance
characteristics
0.125
▊Rating
(25˚C)
Part Number
Responsivity (500K, 1Hz, 1Hz)
0.5
IRS-B345ST03-R1
3.6mVp-p
Field of View
θ1=70° θ2=50°
Optical Filter
3μm long-pass
Electrode
Supply Voltage
1.3
0.675
(in mm)
−
2 to 15V
Operating Temperature
-40 to 70℃
Storage Temperature
-40 to 80℃
d (Vin)
s (Vout)
(RG)
g (GND)
5
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors
Dual Type Pyroelectric Infrared Sensor IRA-E700 Series
2
Pyroelectric infrared sensors, IRA series, exhibit high
sensitivity and reliable performance made possible by
Murata's ceramic technology and Hybrid IC technique
expertise developed over many years.
IRA-E700 series realizes cost benefits and higher
performance with a new infrared sensor element of
improved material parameters and fabrication.
IRA-E700 series is available in two types.
IRA-E710ST0 has enhanced immunity to RFI (Radio
Frequency Interference).
▊Features
▊Dimensions
& Circuit Diagrams
4.7±0.1
3.6±0.2
▊Applications
1. Security
2. Lighting appliances
3. Household or other appliances
φ0.45±0.05
5.08±0.05
d
(25˚C)
Part Number
Responsivity (500K, 1Hz, 1Hz)
IRA-E700ST0
(in mm)
IRA-E710ST0
4.3mVp-p (Typ.)
θ1=θ2=45°
Optical Filter
5μm long-pass
Supply Voltage
s
g
Field of View
Electrode
11±2 4.7±0.2
θ1=45˚
Pyroelectric-element
▊Rating
8.2±0.1
9.2±0.2
θ2=45˚
3.7±0.1
1. High sensitivity and excellent S/N ratio
2. High stability to temperature changes
3. Slight movement can be detectable.
4. High immunity to external noise (Vibration, RFI etc.)
5. Custom design is available.
6. Higher in cost-performance
(2.0×1.0mm)×2
2 to 15V
Operating Temperature
-40 to 70℃
Storage Temperature
-40 to 85℃
(in mm)
IRA-E700ST0
d
s
(RG)
g
IRA-E710ST0
d
s
(RG)
g
6
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors
Quad Type Pyroelectric Infrared Sensor IRA-E900 Series
2
Pyroelectric infrared sensors, IRA series, exhibit high
sensitivity and reliable performance made possible by
Murata's ceramic technology and Hybrid IC technique
expertise developed over many years.
IRA-E900 series realizes cost benefits and higher
performance with a new infrared sensor element of
improved material parameters and fabrication.
IRA-E900 series is available in two types.
IRA-E910ST1 has enhanced immunity to RFI (Radio
Frequency Interference).
▊Features
1. High sensitivity and excellent S/N ratio
2. High stability to temperature changes
3. Slight movement can be detectable.
4. Non directional sensing with wide F.O.V.
5. High immunity to external noise (Vibration, RFI etc.)
6. Custom design is available.
7. Higher in cost-performance
▊Dimensions
& Circuit Diagrams
▊Applications
1. Security
2. Lighting appliances
3. Household or other appliances
▊Rating
∗Specified on the bottom of stem
(25˚C)
Part Number
Responsivity (500K, 1Hz, 1Hz)
Field of View
Optical Filter
Electrode
Supply Voltage
General Tolerance : ±0.2
IRA-E900ST1
(in mm)
IRA-E910ST1
3.3mVp-p (Typ.)
θ1=θ2=41°
5μm long-pass
(1.1×1.1mm)×4
3 to 15V
Operating Temperature
-25 to 55℃
Storage Temperature
-40 to 85℃
(in mm)
d
IRA-E900ST1
+
+
+
+
s
(RG)
g
IRA-E910ST1
d
+
+
+
+
s
(RG)
g
7
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data
▊Spectral
Response of Window Materials (IRS Series)
100
%T
90
Transmission Ratio (%)
80
3
70
60
50
40
30
20
10
0
4500 4000 3500 3000 2500 2000 1750 1500 1250 1000
750
500
Wave Number (μm)
▊Spectral
Response of Window Materials (IRA Series)
Wave Length (μm)
(%) 2.5
100
3.0
4.0
5.0
6.0
7.0
8.0
10.0
12.0
1200
1000
800
80
60
40
20
0
4000
▊Frequency
8
3500
Characteristics
3000
2500
2000 1800 1600 1400
Wave Number (cm–1)
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
S21J.pdf
2012.10.1
Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data
▊Test
Method of Sensitivity
3
*1
IRA Series
IRS Series
▊Typical
Black Body
Mechanical Chopper
500K
1Hz
Application Circuit (Human Detection)
9
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensor IRS/IRA Series Characteristics Data
■ Typical Application Circuit (Analog out Type)
3.3V
+V
R13
224
D D
C10
153
C9
153
R6
752
R10
825
R8
825
R3
182
D2
DA3J101F
R9
473
R1
C1
106
S S
G G
C7
106
C6
102 R12
474
R15
0.01
A_Out
R5
104
NJM2904 2/2
U1
473
U2
NJM2904 1/2
R11
473
C8
226
NJM2904 1/2
U1
U2
NJM2904 2/2
C5
105
C2
106
R2
182
C4
106
0.01
R7
182
D1
DA3J101F
C3
105
R16
■ Typical Application Circuit (Comparator out Type)
3.3V
+V
R13
224
5
DD
C10
153
C9
153
R6
752
R10
825
R8
825
R3
182
D2
DA3J101F
C1
106
U2
NJM2904 1/2
C7 C6
106 102 R12 R11
474 473
C2
106
▊Reliability
R4
104
+
SS
GG
NJM2903 1/2
U1
R9
473
R1
C8
226
0.01
R14
R18
0.01
COut
R5
104
473
C5
105
U2
NJM2904 2/2
D1
DA3J101F
R2
182
R7
182
R17
0.01
C3
105
+
C4
106
NJM2903 2/2
U1
Test
IRS series, IRA-E700 series, IRA-E900 series
Test Conditions
Item
High Temperature
100℃ for 500 hrs.
Low Temperature
—40℃ for 500 hrs.
Humidity
60℃, 95% RH for 500 hrs.
20 times of following cycle.
Heat Cycle
—25℃, 30 min. ⇨Room temp., 30 min.⇩
⇧Room temp., 30 min. ⇦55℃, 30 min.
Vibration
Shock
Soldering Heat
Hermetic Sealing
10
Apply vibration of amplitude of 1.5mm with 10 to 55Hz band to each of 3
perpendicular directions for 60 min.
Apply shock of 100G sine wave by standard shock tester to each of 3
perpendicular directions.
Immerse up to 3.0mm from can case in solder bath of 260±5℃ for 10±1 s.
Conform to MIL-STD-202F chapter 112D, condition D.
Immerse in fluorocarbon bath (FC-40) of 125±5℃ for 20 s.
Criteria
After test completion, leave for three hours in
normal humidity temperature conditions, and
then measure.
1. External appearance:
No significant damage
2. Sensitivity:
Tolerance within 20% deviation from original
value
3. Noise:
Maximum tolerance +100mV of original value
No generation of bubbles
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
S21J.pdf
2012.10.1
Pyroelectric Infrared Sensors/Lens(IRS Series)
IML-0650
ø9.5
2.8
(1.8)
ø1
9
2.7
ø1
(6.66)
60˚
0.
25
B
0.79902
2
0.1
2.8
0.75
10.25
3.55
4.3 (4.5)
.5
5R6
0.75
(1.45)
ø11
ø9.5
ø8
4-ø
0.5
(5.13)
General tolerance: ±0.15mm
(in mm)
2.8(m)
0.6(m)
1.7(m)
5
6.0(m)
Unit: m
Distance: 4.0m
Sensor : IRS-B210ST01
0.6(m)
1.7(m)
2.8(m)
6.0(m)
Unit: m
Distance: 4.0m
Sensor : IRS-B340ST02
11
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRS Series)
IML-0654
hook
A
7
11
8
16.2
13
hook
0.6
2º
(1)
(1.777)
7.5
5º
14
0.4
section A
60º
1.00
5
0.50
0.00
-0.50
-1.00
-1.50
-1.00
-0.50
0.00
0.50
1.00
1.50
Unit: m
Distance: 1.0m
Sensor : IRS-B210ST01
1.00
0.50
0.00
-0.50
-1.00
-1.50
-1.00
-0.50
0.00
0.50
1.00
1.50
Unit: m
Distance: 1.0m
Sensor : IRS-B340ST02
12
(1.4)
8
(0.6)
2
(0.5)
SR49.5
3.2
1.58
(0.5)
0.5
2º
1.4
(1.277)
3.2
1.5
11
10
(0.5)
6.1
(0.5)
SR50
15
3.2
8.5
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
S21J.pdf
2012.10.1
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRS Series)
IML-0660
5
4
3
2
1
0
-1
3.0
-2
R6.0
R6.5
-3
-4
R6.6
-5
-5 -4 -3 -2 -1 0
A
(5.19)
1.25
1.5
3.25
4.0-ø0.4
(ø10.4)
(0.5)
(R5.7)
(6.7)
3
4
5
4
3
2
B
Cross Section A-A
2.0
1
0
-1
0.07
-2
(2.9)
Detail Drawing B
0.5
(0.57)
(10.4)
2
5
(0.95)
0.1
(8.32)
ø11.0
1
(Distance: 2.5m, Combination with IRS-B210ST01)
1.55
A
General Tolerance: ±0.2mm
Non Instructions Corner: max.R0.2
(in mm)
(4.8)
-3
-4
-5
-5 -4 -3 -2 -1 0 1 2 3 4 5
(Distance: 2.5m, Combination with IRS-B340ST02)
IML-0662
3m
3m
3m
3m
0m
0m
8.0
9.0
6.7
6.7
3m
B
B
3m
Vertical
3
4-C1.4
4-R1.8
2.9
Horizontal
2
A
4.7
B-B
2-C0.5
2.75
4.4
4-C0.5
1
0
A
4.7
-1
A-A
-2
General Tolerance: ±0.2mm
Non Instructions Corner: max.R0.2
(in mm)
-3
-3
-1
1
3
(Distance: 1m, Combination with IRS-B210ST01)
13
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
焦電型赤外線センサ／レンズ（IRSシリーズ）
IML-0668
3
2
1
0
-1
9.2
(IRS-B210ST01-R1)
-2
7.2
(3.2)
draft 2°
Figure 3-1 Luminous Intensity Distribution
(Distance: 3m, Combination with IRS-B210ST01)
-3
-3
-2
-1
0
1
2
3
-2
-1
0
1
2
3
draft 1°
A
ø9
2.8
0.3
ø1
3
2
B
B
1
A
8.0
4.8
(2)
0
A-A
(2)
B-B
(0.3)
(2.3)
-1
General Tolerance: ±0.2mm
Non Instructions Corner: max.R0.2
(in mm)
14
(IRS-B340ST02-R1)
-2
Figure 3-2 Luminous Intensity Distribution
(Distance: 3m, Combination with IRS-B340ST02)
-3
-3
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRA Series)
ø11
R6.5
ø12
IML-0669
0.07
1.55
0.57
0.9
1.5
0.5
Distance: 2.5m
ø10.2
2
1.13
1.254
5
5.
SR
3.25 7.254
Thickness 0.4t
max: 6.0m
Distance: 2.5m
Unit: m
Distance: 2.5m
max: 7.5m
Distance: 2.5m
2.5m
Distance:
Sensor : IRS-B210ST01
max: 6.0m
Distance:
Distance: 2.5m
2.5m
max: 7.5m
Unit: m
Distance: 2.5m
Sensor : IRS-B340ST02
15
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRA Series)
IML-0635
IML-0636
16
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
S21J.pdf
2012.10.1
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRA Series)
IML-0637
5
IML-0638
3m
6.11m
3m
42º
0m
4.91m
42º
3m
On the Floor
3m
Vertical
0m
3m
Vertical
Horizontal
45.5º
45.5º
Horizontal
Pyroelectric Element
Assembled with Murata sensor IRA-E700 Series.
17
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRS/IRA Series)
PPGI0601
(in mm)
5
PPGI0626
(in mm)
18
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
S21J.pdf
2012.10.1
Pyroelectric Infrared Sensors/Lens(IRS/IRA Series)
PPGI0902
5
(in mm)
19
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pyroelectric Infrared Sensors/Lens(IRA Series)
IMD-FL01G
52 deg.
m
34 deg.
3.0
2.0
12.5 deg.
1.0
ø2.0
0
1.0
2.0
3.0
4.0
5.0
m
12.8
16.5
21.5
26.5
1.0
2.0
5.0
3.0
20.5
22.5
Angle of Horizontal
Focal point (Pyro-Element)
m
5.1
16.4
2.0
1.0
(in mm)
15 deg.
1.0
General tolerance : ±0.4
0
1.0
2.0
3.0
4.0
5.0
m
1.0
2.0
Angle of Vertical
52 deg.
IMD-FL01W
m
34 deg.
3.0
2.0
12.5 deg.
1.0
0
1.0
ø2.0
2.0
3.0
4.0
5.0
m
1.0
12.8
16.5
21.5
26.5
2.0
3.0
Angle of Horizontal
5.0
20.5
22.5
m
2.0
Focal point (Pyro-Element)
15 deg.
1.0
5.1
16.4
1.0
(in mm)
0
1.0
General tolerance : ±0.4
2.0
3.0
4.0
5.0
m
1.0
2.0
Angle of Vertical
Fresnel lens are available upon request.
20
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
▊Notice
1. Caution (Design)
2. Caution (Handling and Storage)
(1) Please make sure that your product has been evaluated
and confirmed against your specifications when our
product is mounted to your product.
(2) Be sure to provide an appropriate fail-safe function on
your product to prevent a second damage that may be
caused by the abnormal function or the failure of our
product.
(3) In case of outdoor use, suitable optical filter and water
and humidity proof structure should be applied.
(4) To prevent failure or malfunction, please use a stabilized
power supply.
(5) Please avoid using the sensor in the following conditions
because it may cause failure or malfunction.
(a) in such a fluid as water, alcohol etc. corrosive gas
(SO2, Cl2, NOX etc.) or sea breeze
(b) in high humidity
(c) in a place exposed directly to sunlight or headlights of
automobile
(d) in a place exposed to rapid ambient temperature
change
(e) in a place exposed directly to an air-conditioner or
heat vent
(f) strong vibrations
(g) in a place exposed to strong electromagnetic field
(h) in such a place where infrared ray is shaded
(i) in any other place similar to the above (a) through (h)
(1) The optical filter of the sensor should not be scratched or
soiled.
(2) Strong shock should be avoided.
(3) Electrostatics and strong electromagnetic field should be
avoided.
(4) The sensor should be kept on conductive sponge.
(5) High temperature, high humidity, fluid such as water or
alcohol etc., corrosive gas (SO2, Cl2, NOX etc.) and sea
breeze should be avoided.
21
S21J.pdf
2012.10.1
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
▊Notice
3.Caution (Mounting)
(IRS Series)
Soldering Conditions
Following figure shows temperature profile when reflow soldering.
・Cleaning after reflow soldering should not be applied.
・Flow soldering should not be applied.
・Please contact us when using other reflow profile except following reflow profile.
Peak temperature on product surface
250ºC, 5sec. max.
Temp. (ºC)
245ºC
220ºC
180ºC
150ºC
100ºC
Heating
220ºC
min.
Pre-Heating
150-180ºC
Heating period
80-100 sec.
Gradual
in air
2ºC/sec.
max.
(20sec. 30-60 120 sec.
min.) sec.max. min.
Time (sec.)
(1) Cleaning after reflow soldering should not be applied.
Optical filter of sensor should not be soiled because it may cause failure or malfunction.
(2) Please follow soldering conditions described in the specification. This product can permanently stop operating if the
piezoelectric(pyroelectric) characteristic is decreased due to excessive heating.
3.Caution (Mounting)
(IRA Series)
(1) Soldering
(a) Hand soldering should be applied.
(b) Soldering should be done quickly as following.
Temperature of soldering iron : 350˚C
Distance from can case
Period of time
1 to 3mm
Within 3 seconds per point
Over 3mm
Within 10 seconds per point
(c) Soldering flux should be rosin flux and not contain more than 0.2wt% chlorine.
Soldering flux should be removed after soldering.
(2) Cleaning
Soldering flux should be removed after soldering.
Soldering flux may cause malfunction or degradation of character unless sufficiently cleaned.
22
Note • Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
S21J.pdf
2012.10.1
工商网监
湘ICP备2023018690号
