UWR-12/665-D5A-C

UWR Series www.murata-ps.com Single Output, High Reliability, 2" x 1", 6-10 Watt, DC-DC Converters FEATURES  Low Cost! Highly reliable!  Proven SMT-on-pcb construction PRODUCT OVERVIEW  Designed to meet UL/EN/IEC 60950-1, CAN/CSA-C22.2 60950-1  Qual tested; HALT tested; EMC tested Placing reliability and cost considerations above all others, Murata Power Solutions' new A-Series DC/ DC Converters combine straightforward circuit topologies, the newest components, proven SMT-on-pcb construction, and highly repeatable automatic assembly techniques. Considering the critical low-cost and long-term-reliability requirements of today’s telecom, datacom and computer/networking applications, the A-Series may well be the most cost-effective DC/DC’s available today. The single-output, 6-10 Watt Models of the A-Series deliver both high power densities and impressive MTBF’s. Their superior durability is substantiated by a rigorous in-house qualification program including HALT (Highly Accelerated Life Testing). The goal of HALT is not to simulate field conditions but to expose devices to multiple excessive stresses with  Small packages, 2" x 1" x 0.375"  Standard pinouts  5, 5.2, 12 or 15 Volt outputs  Choice of 3 wide-range inputs: 4.7-7.25 Volts 9-18 Volts 18-75 Volts  Fully isolated, 1500Vdc guaranteed  –40 to +100°C operation  5-side metal shielded cases with nonconductive baseplates  Modifications and customs for OEMs the intention of precipitating any potential electrical, mechanical or process weaknesses. Packaged in 2" x 1" x 0.375" shielded metal cases with non-conductive coatings, these fully isolated (1500Vdc guaranteed) DC/DC’s offer excellent line/load regulation, full I/O protection, and industrystandard pinouts. Output voltages include 5, 5.2, 12 and 15 Volts. Input voltage ranges are either 4.7-7.25V ("D5A" models), 9-18V ("D12A" models) or 18-75V ("D48A" models). All A-Series UWR models are fully EMI characterized and agency safety approved. A-Series DC/DC’s are extremely reliable, easyto-use, cost-effective power converters. Use them to improve the reliability of existing equipment or to develop new systems that exceed design objectives. +VOUT (3) +VIN (1) COMMON (5) Typical topology is shown –VIN (2) PWM CONTROLLER OPTO ISOLATION REFERENCE & ERROR AMP Figure 1. Simplified Schematic 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_UWR6-10W Series.E01 Page 1 of 6 UWR Series Single Output, High Reliability, 2" x 1", 6-10 Watt, DC-DC Converters Performance Specifications and Ordering Guide ➀ Output Root Model ➅ UWR-5/1600-D5A-C UWR-5/2000-D24E-C ➄ UWR-5.2/1500-D5A-C UWR-12/665-D5A-C UWR-12/830-D12A-C UWR-5/1800-D48A-C UWR-5/2000-D12A-C UWR-5/2000-D48E-C ➄ UWR-12/750-D48A-C UWR-15/530-D5A-C UWR-15/600-D48A-C UWR-15/665-D12A-C Input VOUT * (Volts) IOUT (mA) 5 5 5.2 12 12 5 5 5 12 15 15 15 1600 2000 1500 665 830 1800 2000 2000 750 530 600 665 R/N (mVp-p) ➁ Typ. Max. 50 50 50 75 75 75 50 50 75 50 75 75 Regulation (Max.) Line Load ➂ 100 75 100 100 100 100 75 75 100 100 100 100 ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.1% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% ±0.2% Range (Volts) IIN ➃ (mA) 5 24 5 5 12 48 12 48 48 5 48 12 4.7-7.25 18-36 4.7-7.25 4.7-7.25 9-18 18-75 9-18 36-72 18-75 4.7-7.25 18-75 9-18 20/2105 10/490 20/2053 25/2046 35/988 10/193 15/1029 10/248 10/230 40/2065 10/233 35/978 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.25% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Package (Case, Pinout) Efficiency Min. Typ. VIN Nom. (Volts) 74% 83% 74% 75% 81% 81% 79.5% 82% 81.5% 75% 81.5% 82% 76% 85% 76% 78% 84% 83% 81% 84% 82.5% 77% 84% 85% C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 C2, P11 ➀ ➁ ➂ ➃ Typical at TA = +25°C under nominal line voltage and full-load conditions unless otherwise noted. Ripple/Noise (R/N) measured over a 20MHz bandwidth. 10% to 100% load. Nominal line voltage, no-load/full-load conditions. ➄ See Technical Notes for an explanation of trading off input voltage ranges for higher full-power operating temperature. ➅ Please see the Part Number Structure for complete ordering options. PART NUMBER STR UCTURE MECHANICAL SPECIFICATIONS U WR - 5 / 1800 - D48 A - C RoHS-6 hazardous substance compliant Output Configuration: U = Unipolar A-Series High Reliability Wide Range Input 2.00 (50.8) METAL CASE Case C2 0.375 (9.5) INSULATED BASE Input Voltage Range: D5 = 4.7-7.25 Volts (5V nominal) D12 = 9-18 Volts (12V nominal) D24 = 18-36 Volts (24V nominal) D48 = 18-75/36-72 Volts (48V nominal) Nominal Output Voltage: 5, 5.2, 12 or 15 Volts Maximum Output Current in mA Note: Some model number combinations may not be available. Contact Murata Power Solutions for further information. 0.040 ±0.002 DIA. (1.016 ±0.051) 0.20 MIN (5.1) 0.800 (20.3) 0.60 (15.24) 3 1 1.00 (25.4) D, E 8 B 0.200 (5.08) C BOTTOM VIEW A Output Power (Watts) I/O Connections E Pin 1 2 3 4 5 6 UWR-5/1600-D5A UWR-5/1800-D48A UWR-5/2000-D12A UWR-5/2000-D24E UWR-5/2000-D48E UWR-5.2/1500-D5A UWR-12/665-D5A UWR-12/750-D48A UWR-12/830-D12A UWR-15/530-D5A UWR-15/600-D48A UWR-15/665-D12A 4 3 2 1 B D C A A B B E C B E C 0 40 45 50 55 Function P11 +Vin –Vin +Vout No Pin Common Notes: Dimensions are in inches (mm) shown for ref. only. Third Angle Projection Tolerances (unless otherwise specified): .XX ± 0.02 (0.5) .XXX ± 0.010 (0.25) Angles ± 2˚ Components are shown for reference only. For "D5A, D12A and D24E" models, the case is connected to pin 2 (–VIN). 0 –40 0.10 (2.54) D 7 5 0.400 (10.16) 5 A, C 9 0.800 (20.32) 2 TEMPERATURE DERATING 10 0.100 (2.54) 4 60 65 70 75 80 85 90 95 100 For "D48A and D48E" models, the case is connected to pin 1 (+VIN). Ambient Temperature (°C) www.murata-ps.com/support MDC_UWR6-10W Series.E01 Page 2 of 6 UWR Series Single Output, High Reliability, 2" x 1", 6-10 Watt, DC-DC Converters Performance/Functional Specifications Typical @ TA = +25°C under nominal line voltage and full-load conditions, unless noted. ➀ Input Absolute Maximum Ratings Input Voltage Range: D5A Models D12A Models D24E Models D48A Models D48E Models 4.7-7.25 Volts (5V nominal) 9-18 Volts (12V nominal) 18-36Volts (24V nominal 18-75 Volts (48V nominal) 36-72 Volts (48V nominal) Input Voltage: D5A Models D12A Models D24E Models D48A and D48E Models Input Current See Ordering Guide Input Reverse-Polarity Protection Input Filter Type ➁ Pi Overvoltage Shutdown: D5A Models D12A Models D24E Models D48A and D48E Models None 20 Volts 40 Volts 76 Volts Reverse-Polarity Protection Yes (Instantaneous, 6A maximum) Output VOUT Accuracy (50% load) ±1%, maximum Temperature Coefficient ±0.02% per °C Ripple/Noise (20MHz BW) ➁ See Ordering Guide Line/Load Regulation See Ordering Guide Efficiency See Ordering Guide Isolation Voltage ➂ 1500Vdc, guaranteed Isolation Capacitance 250pF Current Limiting Auto-recovery Overvoltage Protection ➃ Zener/transorb clamp, magnetic feedback Dynamic Characteristics Current must be