NXP Semiconductors
Doc. No. : IMXRT1060CEC_SUPPLEMENT
Data Sheet Supplement
Rev. 1.1, 08/2019
i.MX RT106x Crossover Processors for
EdgeReady™ Off-The-Shelf ML/AI IoT Edge
Compute Solutions
1. Document Overview
This document provides information supplemental to the
IMXRT1060CEC data sheet, for the i.MX RT1060 Crossover
Processors for Consumer Products.
The purpose of the supplement is to outline the differences
between the various i.MX RT106x crossover processors for
EdgeReady™ off-the-shelf ML/AI IoT edge compute
solutions (MIMXRT106xDVL6A, where “x” can be a letter
from “A” to “Z”) and the standard i.MX RT1060 parts, e.g.
(MIMXRT1062DVL6A).
The i.MX RT106x devices use the same reference manual as
the other i.MX RT1060 family members: IMXRT1060RM,
i.MX RT1060 Processor Reference Manual.
The i.MX RT106x crossover processors are covered by the
same specifications as the other i.MX RT1060 crossover
processors described in the IMXRT1060CEC.
© 2018-2019 NXP B.V.
Contents
1.
2.
3.
4.
5.
6.
Document Overview .......................................................... 1
i.MX RT106A Introduction ............................................... 2
i. MX RT106F Introduction ............................................... 3
i. MX RT106L Introduction ............................................... 4
Ordering Information ......................................................... 5
Revision History ................................................................ 6
i.MX RT106A Introduction
2. i.MX RT106A Introduction
The i.MX RT106A audio crossover processor is an EdgeReady™ solution specific variant of the i.MX
RT1060 family of crossover processors, targeting cloud based embedded voice applications. It features
NXP’s advanced implementation of the Arm Cortex®-M7 core, which operates at speeds up to 600
MHz to provide high CPU performance and best real-time response. i.MX RT106A based solutions
enable system designers to easily and inexpensively add cloud-based voice control capabilities to a wide
variety of smart appliances, smart home, smart retail, and smart industry devices. The i.MX RT106A is
licensed to run NXP’s turnkey cloud-based voice assistant software solutions, which may include:
• Analog front end softDSP
o Far field processing
o Acoustic echo cancellation (barge-in)
o Ambient noise reduction
o Beam forming
o Direction of arrival
o Playback processing
o Codecs
• Wake-word inference engine
• Media player/streamer
• Cloud SDK
• RTOS OTA Client
o OTA Signing Scripts
o CA Based Image Authentication
o OTA Rollback
o Image Redundancy
• Encrypted XIP Support
o Encrypted XIP Read while write
o Encrypted XIP Rollback
• USB MSD Update
• Auto Cert Generation
• High Assurance Boot
• Bootloader and Application Validation
• Encrypted Filesystem
• Factory Automation Scripts
• MQTT, LWIP, TLS
• Discovery and onboarding
• All drivers, including 802.11 Wi-Fi®, Ethernet and Bluetooth™
• Supported by MCUXpresso SDK, IDE and Config Tools
For more information, please refer to the documentation for the specific solution product development
kit (e.g. SLN-ALEXA-IOT), including the User’s Guide, API Guide, and Developers Guide.
i.MX RT106x Crossover Processors for EdgeReady™ Off-The-Shelf ML/AI IoT Edge Compute Solutions, Data Sheet
Supplement, Rev. 1.1, 08/2019
2
NXP Semiconductors
i. MX RT106F Introduction
3. i. MX RT106F Introduction
The i.MX RT106F face recognition crossover processor is an EdgeReady™ solution specific variant of
the i.MX RT1060 family of crossover processors, targeting face recognition applications. It features
NXP’s advanced implementation of the Arm Cortex®-M7 core, which operates at speeds up to 600
MHz to provide high CPU performance and best real-time response. i.MX RT106L based solutions
enable system designers to easily and inexpensively add face recognition capabilities to a wide variety
of smart appliances, smart home, smart retail, and smart industry devices. The i.MX RT106F is licensed
to run NXP’s turnkey solution for face recognition which may include:
• Camera drivers
• Image capture
• Image pre-processing
• Face detection
• Anti-spoofing
• Face tracking
• Face alignment
• Face recognition
• Confidence measure
• Face recognition quantified result
• RTOS OTW Client
o OTW Signing Scripts
o OTW Rollback
o Image Redundancy
• USB MSD Update
• Bootloader and Application Validation
• Factory Automation Scripts
• Supported by MCUXpresso SDK, IDE and Config Tools
For more information, please refer to the documentation for the specific solution product development
kit, including the User’s Guide, API Guide, and Developers Guide.
i.MX RT106x Crossover Processors for EdgeReady™ Off-The-Shelf ML/AI IoT Edge Compute Solutions, Data Sheet
Supplement, Rev. 1.1, 08/2019
NXP Semiconductors
3
i. MX RT106L Introduction
4. i. MX RT106L Introduction
The i.MX RT106L automatic speech recognition crossover processor is an EdgeReady™ solution
specific variant of the i.MX RT1060 family of crossover processors, targeting edge based local
commands voice applications. It features NXP’s advanced implementation of the Arm Cortex®-M7
core, which operates at speeds up to 600 MHz to provide high CPU performance and best real-time
response. i.MX RT106L based solutions enable system designers to easily and inexpensively add farfield local commands based voice control capabilities to a wide variety of smart appliances, smart home,
smart retail, and smart industry devices. The i.MX RT106L is licensed to run NXP’s turnkey solution
for local commands automatic speech recognition, which may include:
• Analog front end softDSP
o Far field processing
o Acoustic echo cancellation (barge-in)
o Ambient noise reduction
o Direction of arrival
o Playback processing
o Codecs
• Automatic speech recognition engine for wake-word and local commands
• Media player/streamer
• RTOS OTA Client
o OTA Signing Scripts
o CA Based Image Authentication
o OTA Rollback
o Image Redundancy
• Encrypted XIP Support
o Encrypted XIP Read while write
o Encrypted XIP Rollback
• USB MSD Update
• Auto Cert Generation
• High Assurance Boot
• Bootloader and Application Validation
• Factory Automation Scripts
• MQTT, LWIP, TLS
• All drivers, including 802.11 Wi-Fi®, Ethernet and Bluetooth™
• Supported by MCUXpresso SDK, IDE and Config Tools
For more information, please refer to the documentation for the specific solution product development
kit, including the User’s Guide, API Guide, and Developers Guide.
i.MX RT106x Crossover Processors for EdgeReady™ Off-The-Shelf ML/AI IoT Edge Compute Solutions, Data Sheet
Supplement, Rev. 1.1, 08/2019
4
NXP Semiconductors
Ordering Information
5. Ordering Information
Part Number
MIMXRT106ADVL6A
MIMXRT106FADVL6A
Features
• 600 MHz, commercial
grade for voice
applications, with
complete voice
solution software
• eDMA
• Boot ROM (128 KB)
• On-chip RAM (1 MB)
• SEMC
• GPT x2
• 4-channel PIT
• Qtimer x4
• PWM x4
• ENC x4
• WDOG x4
• LCD/CSI/PXP
• SPDIF x1
• SAI x3
• MQS x1
• USB OTG x2
• eMMC 4.5/SD 3.0 x2
•
•
•
•
•
• 600 MHz, commercial
grade for voice
applications, with
complete voice
solution software
• eDMA
• Boot ROM (128 KB)
• On-chip RAM (1 MB)
• SEMC
• GPT x2
• 4-channel PIT
• Qtimer x4
• PWM x4
• ENC x4
• WDOG x4
• LCD/CSI/PXP
• SPDIF x1
• SAI x3
• MQS x1
• USB OTG x2
• eMMC 4.5/SD 3.0 x2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ethernet x2
UART x8
I2C x4
FlexSPI x2
FlexCAN (with
Flexible Data-Rate
supported)
FlexIO x3
127 GPIOs (124
tightly coupled)
HAB/DCP/BEE
TRNG
SNVS
SJC
ADC x2
ACMP x4
TSC
DCDC
Temperature sensor
GPC hardware
power management
controller
Ethernet x2
UART x8
I2C x4
FlexSPI x2
FlexCAN (with
Flexible Data-Rate
supported)
FlexIO x3
127 GPIOs (124
tightly coupled)
HAB/DCP/BEE
TRNG
SNVS
SJC
ADC x2
ACMP x4
TSC
DCDC
Temperature sensor
GPC hardware
power management
controller
Package
Junction
Temperature
TJ (°C)
10 x 10 mm,
0.65 mm pitch,
196-pin
MAPBGA
0 to +95
10 x 10 mm,
0.65 mm pitch,
196-pin
MAPBGA
0 to +95
i.MX RT106x Crossover Processors for EdgeReady™ Off-The-Shelf ML/AI IoT Edge Compute Solutions, Data Sheet
Supplement, Rev. 1.1, 08/2019
NXP Semiconductors
5
Revision History
MIMXRT106LADVL6A
• 600 MHz, commercial
grade for voice
applications, with
complete voice
solution software
• eDMA
• Boot ROM (128 KB)
• On-chip RAM (1 MB)
• SEMC
• GPT x2
• 4-channel PIT
• Qtimer x4
• PWM x4
• ENC x4
• WDOG x4
• LCD/CSI/PXP
• SPDIF x1
• SAI x3
• MQS x1
• USB OTG x2
• eMMC 4.5/SD 3.0 x2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ethernet x2
UART x8
I2C x4
FlexSPI x2
FlexCAN (with
Flexible Data-Rate
supported)
FlexIO x3
127 GPIOs (124
tightly coupled)
HAB/DCP/BEE
TRNG
SNVS
SJC
ADC x2
ACMP x4
TSC
DCDC
Temperature sensor
GPC hardware
power management
controller
10 x 10 mm,
0.65 mm pitch,
196-pin
MAPBGA
0 to +95
6. Revision History
Revision
1
Date
12/2018
Substantive changes
Initial release
1.1
08/2019
Title changed, New part numbers
added, Added Section 4 and
Section 5.
i.MX RT106x Crossover Processors for EdgeReady™ Off-The-Shelf ML/AI IoT Edge Compute Solutions, Data Sheet
Supplement, Rev. 1.1, 08/2019
6
NXP Semiconductors
Information in this document is provided solely to enable system and software implementers
to use NXP products. There are no express or implied copyright licenses granted hereunder to
design or fabricate any integrated circuits based on the information in this document. NXP
reserves the right to make changes without further notice to any products herein.
NXP makes no warranty, representation, or guarantee regarding the suitability of its products
for any particular purpose, nor does NXP assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be provided in
NXP data sheets and/or specifications can and do vary in different applications, and actual
How to Reach Us:
Home Page:
nxp.com
performance may vary over time. All operating parameters, including “typicals,” must be
validated for each customer application by customer's technical experts. NXP does not convey
any license under its patent rights nor the rights of others. NXP sells products pursuant to
Web Support:
nxp.com/support
standard terms and conditions of sale, which can be found at the following address:
nxp.com/SalesTermsandConditions.
While NXP has implemented advanced security features, all products may be subject to
unidentified vulnerabilities. Customers are responsible for the design and operation of their
applications and products to reduce the effect of these vulnerabilities on customer’s
applications and products, and NXP accepts no liability for any vulnerability that is discovered.
Customers should implement appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
NXP, NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD,
COOLFLUX, EMBRACE, GREENCHIP, HITAG, I2C BUS, ICODE, JCOP, LIFE VIBES,
MIFARE, MIFARE CLASSIC, MIFARE DESFire, MIFARE PLUS, MIFARE FLEX, MANTIS,
MIFARE ULTRALIGHT, MIFARE4MOBILE, MIGLO, NTAG, ROADLINK, SMARTLX,
SMARTMX, STARPLUG, TOPFET, TRENCHMOS, UCODE, Freescale, the Freescale logo,
AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient
Solutions logo, Kinetis, Layerscape, MagniV, mobileGT, PEG, PowerQUICC, Processor
Expert, QorIQ, QorIQ Qonverge, Ready Play, SafeAssure, the SafeAssure logo, StarCore,
Symphony, VortiQa, Vybrid, Airfast, BeeKit, BeeStack, CoreNet, Flexis, MXC, Platform in a
Package, QUICC Engine, SMARTMOS, Tower, TurboLink, and UMEMS,EdgeScale,
EdgeLock, eIQ, and Immersive 3D are trademarks of NXP B.V. All other product or service
names are the property of their respective owners. Arm, AMBA, Arm Powered, Artisan,
Cortex, Jazelle, Keil, SecurCore, Thumb, TrustZone, and μVision are registered trademarks of
Arm Limited (or its subsidiaries) in the EU and/or elsewhere. Arm7, Arm9, Arm11, big.LITTLE,
CoreLink, CoreSight, DesignStart, Mali, Mbed, NEON, POP, Sensinode, Socrates, ULINK and
Versatile are trademarks of Arm Limited (or its subsidiaries) in the EU and/or elsewhere. All
rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. The
Power Architecture and Power.org word marks and the Power and Power.org logos and
related marks are trademarks and service marks licensed by Power.org.
© 2018-2019 NXP B.V.
Doc. No. : IMXRT1060CEC_SUPPLEMENT
Rev. 1.1
08/2019