G3VM-101LR

G3VM-101LR MOS FET Relays World’s Smallest * SSOP Package MOS FET Relays with High Load Voltage of 100 V. • Leakage current of 200 pA max. when output relay is open. * As of March 2011 Survey by OMRON RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment • Test & Measurement equipment 416 • Communication equipment Model name OMRON mark • Data loggers LOT.No. 612 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form Load voltage (peak value) * Terminals Model Minimum package quantity Number per tape and reel G3VM-101LR SSOP4 1a (SPST-NO) Surface-mounting Terminals 100 V G3VM-101LR (TR05) G3VM-101LR (TR) 500 1,500 Note: Ask your OMRON representative for orders under 1500 pcs or 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ Rating 50 −0.5 5 125 100 80 −0.8 125 Unit mA mA/°C V °C V mA mA/°C °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 25 °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 1 5 Maximum resistance with output ON RON 8 14 Current leakage when the relay is open ILEAK 200 Capacity between terminals COFF 6 8 Capacity between I/O terminals CI-O 0.6 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.1 0.3 Turn-OFF time tOFF 0.1 0.3 1 Unit V µA pF mA Ω pA pF pF MΩ ms ms Measurement conditions Note: 2. Turn-ON and Turn-OFF Times IF = 10 mA IF 1 VR = 5 V 4 RL VDD V = 0, f = 1 MHz VOUT 2 3 IO = 80 mA IF = 10 mA, IO = 80 mA, t = 10 ms VOFF = 80 V V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V (See note 2.) G3VM-101LR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta 10 25 - 80 30 80 60 V mA mA °C ■ Engineering Data IO - Ta 100 80 60 40 20 IF - VF 120 100 80 60 40 100 Ta = 25 °C 10 1 20 0 -20 0 0 20 40 60 80 100 120 0 40 20 100 0.1 0.6 120 0.8 1 On-state resistance RON (Ω) Ta = 25 °C IF = 10 mA 60 40 20 0 -20 1.4 1.6 1.8 LED forward voltage VF (V) RON - Ta 100 1.2 On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature IO - VON 80 80 Ambient temperature Ta (°C) Ambient temperature Ta (°C) Continuous load current vs. On-state voltage 60 IFT - Ta 30 Trigger LED forward current IFT (mA) -20 Continuous load current IO (mA) LED forward current vs. LED forward voltage LED forward current IF (mA) Continuous load current IO (mA) Continuous load current vs. Ambient temperature IF - Ta LED forward current IF (mA) LED forward current vs. Ambient temperature IO = 80 mA IF = 10 mA, t < 1 s 20 10 -40 -60 5 IO = 80 mA t