G3VM-21LR11(TR)

G3VM-21LR11 MOS FET Relays The World’s Smallest SSOP.* MOS FET Relays That Switch Currents Up to 0.9 A with SSOP. Load voltage of 20 V. * As of August 2014 Survey by OMRON RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment • Test & Measurement equipment 416 • Communication equipment Model name OMRON mark • Data loggers LOT.No. 612 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form SSOP4 1a (SPST-NO) Load voltage (peak value) * Terminals Surface-mounting Terminals 20 V Model Minimum package quantity Number per tape and reel G3VM-21LR11 G3VM-21LR11 (TR05) 500 Note: Ask your OMRON representative for orders under 500 pcs. We can supply products with the tape already cut. Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions. * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25 °C) Output Input Item LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF ΔIF/°C VR TJ VOFF IO ΔIO/°C Iop TJ Rating 50 −0.5 5 125 20 900 −12 2.7 125 Unit mA mA/°C V °C V mA mA/°C A °C VI-O 1500 Vrms Ta Tstg - −20 to +85 −40 to +125 260 °C °C °C Measurement conditions Ta ≥ 25 °C Ta ≥ 50 °C t = 100 ms, Duty = 1/10 AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25 °C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 15 Trigger LED forward current IFT 3 Turn-OFF LED forward current IFC 0.1 Maximum resistance with output ON RON 0.18 0.22 Current leakage when the relay is open ILEAK 1 Capacity between terminals COFF 40 Capacity between I/O terminals CI-O 0.3 Insulation resistance between I/O terminals RI-O 1000 108 Turn-ON time tON 0.3 2 Turn-OFF time tOFF 0.2 1 1 Unit V μA pF mA mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times VR = 5 V IF 1 4 RL V = 0, f = 1 MHz VDD VOUT IO = 100 mA 2 3 IOFF = 10 μA IF = 5 mA, IO = 900 mA, t < 1 s VOFF = 20 V V = 0, f = 100 MHz, t < 1 s IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 10 V (See note 2.) G3VM-21LR11 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) Operating LED forward current Continuous load current (AC peak/DC) Ambient operating temperature VDD IF IO Ta −20 - 20 20 900 65 V mA mA °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature LED forward current vs. LED forward voltage IO - Ta 70 60 50 40 30 20 IF - VF 1200 LED forward current IF (mA) Continuous load current IO (mA) LED forward current IF (mA) IF - Ta 1000 800 600 400 100 Ta = 25 °C 50 30 10 5 3 1 0.5 200 10 0 20 40 60 80 100 0 -20 120 0.1 0 20 40 Ambient temperature Ta (°C) 120 0.6 Ta = 25 °C IF = 5 mA 800 400 0 -400 0.35 IO = 900 mA IF = 5 mA t