G3VM-21LR11

MOS FET Relays G3VM-21LR11 High-power, 0.9-A Switching with SSOP Package in a 20-V Load Voltage Model. • RoHS compliant ■ Application Examples • • • • Semiconductor inspection tools Measurement devices Broadband systems Data loggers Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 20 V Model G3VM-21LR11 G3VM-21LR11(TR05) G3VM-21LR11(TR) --500 1,500 Number per tape Note: Use “TR05” instead of “TR” in the part number, to obtain reels with 500 pc/reel. (e.g., G3VM-21LR11(TR05)) ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR11 4.2 416 228 1.9 14 dia. 3.65 0.15 (0.3) 1.27 0.2 3.8 (0.46) 1.8 Note: A tolerance of ±0.1 mm applies to all dimensions unless otherwise specified. Note: The actual product is marked differently from the image shown here. 2.04 Weight: 0.03 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-21LR11 4 3 4 3 228 1 Pin 1 2 Pin 1 1 2 The actual product is marked differently from the image shown here. Beveled side is input side. ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR11 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR11 243 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Symbol IF Δ IF/°C VR Tj VOFF IO Δ IO/°C Tj 50 −0.5 5 125 20 900 −12 125 1,500 −20 to +85 Rating Unit mA mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 50°C Ta ≥ 25°C Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Dielectric strength between input and VI-O output (See note 1.) Ambient operating temperature Storage temperature Soldering temperature Ta Tstg --- −40 to +125 °C 260 ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 --------------1,000 ----Typical 1.15 --15 --0.18 0.2 40 0.3 --0.3 0.2 Maximum 1.3 10 --3.0 0.22 1.0 80 ----2.0 1.0 Unit V μA pF mA Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 100 mA IF = 5 mA, IO = 900 mA, t < 1 s VOFF = 20 V V = 0, f = 100 MHz, t