G3VM-353E(TR)

G3VM-353B/E MOS FET Relays DIP 6-pin package, Analog-switching MOS FET Relays with SPST-NC Contact. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Communication equipment 6 5 4 • Security systems OMRON logo • FA systems Model name LOT.NO. 932 Pin 1 mark • Test & Measurement equipment 1 3 2 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form DIP6 1b (SPST-NC) Terminals Load voltage (peak value) * Model 350 V G3VM-353B G3VM-353E G3VM-353E (TR) PCB Terminals Surface-mounting Terminals Minimum package quantity Number per tube Number per tape and reel 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Connection A Continuous Connection B load current Connection C Connection A ON current reduction Connection B rate Connection C Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 350 150 150 300 −1.5 −1.5 −3.0 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram Connection A Connection A: AC peak/DC Connection B and C: DC Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Connection B Connection C 1 6 Load 2 5 3 4 or AC DC 1 6 2 5 3 4 1 6 2 5 3 4 Load DC Load DC ■ Electrical Characteristics (Ta = 25°C) Output Input Item Symbol Minimum Typical Maximum LED forward voltage VF 1.0 1.15 1.3 Reverse current IR 10 Capacity between terminals CT 30 Trigger LED forward current IFC 1 3 Connection A 15 25 Maximum resistance with Connection B RON 8 14 output ON Connection C 4 7 Current leakage when the relay is open ILEAK 1.0 Capacity between terminals COFF 85 Capacity between I/O terminals CI-O 0.8 Insulation resistance between I/O terminals RI-O 1000 Turn-ON time tON 0.1 1.0 Turn-OFF time tOFF 1.0 3.0 Unit V µA pF mA Ω Ω Ω µA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V Note: 2. Turn-ON and Turn-OFF Times V = 0, f = 1 MHz IF 1 IOFF = 10 µA 6 RL VDD IO = 150 mA VOUT 2 4 IO = 150 mA IO = 300 mA IF = 5 mA, VOFF = 350 V V = 0, f = 1 MHz, IF = 5 mA IF f = 1 MHz, VS = 0 V VI-O = 500 VDC, ROH ≤ 60% 90% VOUT 10% IF = 5 mA, RL = 200 Ω, t ON t OFF VDD = 20 V(See note 2.) 1 G3VM-353B/E MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 280 Unit V Operating LED forward current IF 5 - 25 mA Continuous load current (AC peak/DC) IO - - 150 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature IO - Ta 80 60 40 20 400 Connection C 300 200 Connection A and B 0 20 40 60 80 100 20 40 60 80 100 0.6 0.8 1 1 IO = 150 mA t