G3VM-355JTR

MOS FET Relays G3VM-355J/JR MOS FET Relay with Both SPST-NO and SPST-NC Contacts Incorporated in a Single SOP Package. General-purpose (high On-resistance) Series Added. • SPST-NO/SPST-NC models with an 8-pin SOP package in the 350-V load voltage series. • Continuous load current of 120 mA. • Dielectric strength of 1,500 Vrms between I/O. • RoHS Compliant. ■ Application Examples • Broadband systems • Measurement devices and Data loggers • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO/ SPST-NC Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-355JR G3VM-355J G3VM-355JR(TR) --G3VM-355J(TR) 2,500 Number per stick 50 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-355J/JR 4.4±0.25 9.4±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.1±0.1 0.4±0.1 0.6±0.3 7.0±0.4 Weight: 0.2 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-355J/JR (SPST-NC) 8 7 (SPST-NO) 6 5 1 2 3 4 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-355J/JR 6 to 6.3 1.2 0.8 2.54 2.54 MOS FET Relays G3VM-355J/JR 205 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature Symbol IF IFP Δ IF/°C VR Tj VOFF IO Rating 50 1 −0.5 5 125 350 120 (90) Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Δ ION/°C -1.2 (-0.9) Tj 125 1,500 −40 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +125 °C 260 Values inside parenthesis ( ) are for G3VM-355J ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT IFC RON --15 (40) 25 (50) Ω Minimum 1.0 ------Typical 1.15 --30 1 Maximum 1.3 10 --3 Unit V μA pF mA Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 7 Note: IF 1 2. Turn-ON and Turn-OFF Times 1b 8 RL VDD VOUT IF 1a 3 4 6 5 RL VDD VOUT SPST-NO: IO = 120 mA SPST-NC: IOFF = 10 μA SPST-NO: IF = 5 mA,IO = 120 mA SPST-NC: IF = 0 mA,IO = 120 mA IF IF VOUT 10% t ON 90% t OFF VOUT 10% t ON 90% t OFF Current leakage when ILEAK the relay is open --- 0.0015 NO 1.0 (0.006) 0.0105 NC (0.003) μA VOFF = 350 V Capacity between terminals COFF --- 65 (30) --- pF V = 0, f = 1MHz (NO) V = 0, f = 1MHz, IF = 5 mA (NC) f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) Capacity between I/O terminals CI-O Insulation resistance Turn-ON time Turn-OFF time RI-O SPST-NO tON SPST-NC SPST-NO tOFF SPST-NC --1,000 --------- 0.8 --0.18 (0.3) ----- pF MΩ 1.0 (1.0) ms 0.15 (0.25) 1.0 (1.0) ms 0.11 (0.15) 1.0 (1.0) ms 0.7 (0.5) 3.0 (1.0) ms Values inside parenthesis ( ) are for G3VM-355J ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current IF Ta Symbol VDD 5 --- 20 Minimum ----10 ----Typical Maximum 280 25 120 (90) 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Values inside parenthesis ( ) are for G3VM-355J 206 MOS FET Relays G3VM-355J/JR ■ Engineering Data G3VM-355J Common Characteristics; SPST-NO / SPST-NC LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 160 LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 80 30 120 10 60 80 3 40 1 40 20 0.3 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Characteristics; SPST-NO Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 150 Ta = 25°C 100 IF = 5 mA On-state resistance vs. Ambient temperature RON - Ta 50 Trigger LED forward current vs. Ambient temperature IFT - Ta 5 Trigger LED forward current I F T (mA) 40 IO = 90 mA IF = 5 mA t