G3VM-355FR

G3VM-355CR/FR MOS FET Relays SPST-NO + SPST-NC MOS FET Relay in a Single DIP Package. • SPST-NO/SPST-NC models now included in the 350-V load voltage series. RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Test & Measurement equipment 8 (1b) 7 6 (1a) 5 • Security systems OMRON logo • Amusement machines 932 Pin 1 mark 1 2 Model name LOT.NO. 4 3 Note: The actual product is marked differently from the image shown here. ■ List of Models Package type Contact form DIP8 1a1b (SPST-NO/ SPST-NC) Terminals Minimum package quantity Number per tube Number per tape and reel Load voltage (peak value) * Model 350 V G3VM-355CR G3VM-355FR G3VM-355FR (TR) PCB Terminals Surface-mounting Terminals 50 - - 1,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Output Input Item LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Connection temperature Dielectric strength between I/O (See note 1.) Ambient operating temperature Ambient storage temperature Soldering temperature Symbol IF IFP ∆IF/°C VR TJ VOFF IO ∆IO/°C TJ VI-O Ta Tstg - Rating 50 1 −0.5 5 125 350 120 −1.2 125 2500 −40 to +85 −55 to +125 260 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C °C Measurement conditions 100 µs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C AC for 1 min With no icing or condensation With no icing or condensation 10 s Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Input ■ Electrical Characteristics (Ta = 25°C) Item LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Current leakage when the relay is open Capacity between terminals Capacity between I/O terminals Insulation resistance between I/O terminals 1a Turn-ON time 1b 1a Turn-OFF time 1b Symbol Minimum Typical Maximum VF 1.0 1.15 1.3 IR 10 CT 30 1a : IFT 1 3 1b : IFC RON - 15 Ω µA - COFF - 65 - pF CI-O RI-O 1000 - 0.8 - 1.0 1.0 1.0 3.0 pF MΩ ms ms ms ms tOFF 1.0 mA ILEAK tON - 25 Unit V µA pF Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 1a : IO = 120 mA Note: 2. Turn-ON and Turn-OFF Times 1b : IOFF = 10 µA 1b 1a IF 3 1a : IF = 5 mA, IO = 120 mA IF 1 8 RL VDD 1b : IF = 0 mA, IO = 120 mA VOUT 2 7 4 VOFF = 350 V (1a) V = 0, f = 1 MHz (1b) V = 0, f = 1 MHz, IF = 5 mA f = 1 MHz, VS = 0 V IF IF VI-O = 500 VDC, ROH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V(See note 2.) VOUT 10% t ON 90% t OFF VOUT 6 5 10% t ON RL VDD VOUT 90% t OFF 1 G3VM-355CR/FR MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Load voltage (AC peak/DC) VDD - - 280 Unit V Operating LED forward current IF 5 - 25 mA Continuous load current (AC peak/DC) IO - - 120 mA Ambient operating temperature Ta −20 - 65 °C ■ Engineering Data (Common to SPST-NO and SPST-NC contacts) Continuous load current vs. Ambient temperature Continuous load current IO (mA) LED forward current IF (mA) IF - Ta 100 80 60 40 LED forward current vs. LED forward voltage IO - Ta 280 IF - VF LED forward current IF (mA) LED forward current vs. Ambient temperature 240 200 160 120 100 Ta = 25ºC 50 30 10 5 3 1 80 0.5 20 0.3 40 0 -20 0 20 40 60 80 100 0 -20 120 0 20 40 Ambient temperature Ta (°C) 60 80 100 0.1 0.6 120 0.8 1 1.2 1.4 1.6 1.8 LED forward voltage VF (V) Ambient temperature Ta (°C) (SPST-NO contacts) Continuous load current vs. On-state voltage On-state resistance vs. Ambient temperature 100 0 -100 Trigger LED forward current IFT (mA) Ta = 25°C IF = 5 mA 25 IO = 120 mA t