2SC4617

2SC4617 NPN Silicon General Purpose Amplifier Transistor This NPN transistor is designed for general purpose amplifier applications. This device is housed in the SC−75/SOT-416 package which is designed for low power surface mount applications, where board space is at a premium. Features http://onsemi.com • • • • • Pb−Free Package is Available* Reduces Board Space High hFE, 210 −460 (typical) Low VCE(sat), < 0.5 V Available in 8 mm, 7 inch/3000 Unit Tape and Reel NPN GENERAL PURPOSE AMPLIFIER TRANSISTORS SURFACE MOUNT COLLECTOR 3 1 BASE 2 EMITTER 3 2 1 SC−75 CASE 463 STYLE 1 MARKING DIAGRAM B9 M 1 B9 M = Specific Device Code = Date Code ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2004 1 July, 2004 − Rev. 4 Publication Order Number: 2SC4617/D 2SC4617 MAXIMUM RATINGS (TJ = 25°C) Rating Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current − Continuous Symbol V(BR)CBO V(BR)CEO V(BR)EBO IC Value 50 50 5.0 100 Unit Vdc Vdc Vdc mAdc Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Power Dissipation (Note 1) Junction Temperature Storage Temperature Range Symbol PD TJ Tstg Max 125 150 −55 ~ + 150 Unit mW °C °C 1. Device mounted on a FR-4 glass epoxy printed circuit board using the minimum recommended footprint. ELECTRICAL CHARACTERISTICS (TA = 25°C) Characteristic Collector-Base Breakdown Voltage (IC = 50 mAdc, IE = 0) Collector-Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) Emitter-Base Breakdown Voltage (IE = 50 mAdc, IE = 0) Collector-Base Cutoff Current (VCB = 30 Vdc, IE = 0) Emitter-Base Cutoff Current (VEB = 4.0 Vdc, IB = 0) Collector-Emitter Saturation Voltage (Note 2) (IC = 60 mAdc, IB = 5.0 mAdc) DC Current Gain (Note 2) (VCE = 6.0 Vdc, IC = 1.0 mAdc) Transition Frequency (VCE = 12 Vdc, IC = 2.0 mAdc, f = 30 MHz) Output Capacitance (VCB = 12 Vdc, IC = 0 Adc, f = 1 MHz) 2. Pulse Test: Pulse Width ≤ 300 ms, D.C. ≤ 2%. Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO VCE(sat) − hFE 120 fT COB − − − 180 2.0 560 − − MHz pF − 0.4 − Min 50 50 5.0 − − Typ − − − − − Max − − − 0.5 0.5 Unit Vdc Vdc Vdc mA mA Vdc ORDERING INFORMATION Device 2SC4617 2SC4617G 2SC4617T1 2SC4617T1G Package SC−75 SC−75 (Pb−Free) SC−75 SC−75 (Pb−Free) Shipping† 3,000 / Tape & Reel 3,000 / Tape & Reel 3,000 / Tape & Reel 3,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 2SC4617 TYPICAL ELECTRICAL CHARACTERISTICS 60 IC, COLLECTOR CURRENT (mA) 50 40 30 20 10 0 0 2 4 6 VCE, COLLECTOR VOLTAGE (V) TA = 25°C 160 mA 140 mA DC CURRENT GAIN 120 mA 100 mA 80 mA 60 mA 40 mA IB = 20 mA 8 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) TA = 75°C TA = − 25°C 100 1000 TA = 25°C VCE = 10 V Figure 1. IC − VCE 2 TA = 25°C COLLECTOR VOLTAGE (mV) 1.5 900 800 700 600 500 400 300 200 100 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 100 0 0.2 0.5 1 Figure 2. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (V) 1 0.5 TA = 25°C VCE = 5 V 5 10 20 40 60 80 100 150 200 IC, COLLECTOR CURRENT (mA) Figure 3. Collector Saturation Region 20 Cib, INPUT CAPACITANCE (pF) 18 16 14 12 10 7 6 Cob, CAPACITANCE (pF) 5 4 3 2 0 1 2 VEB (V) 3 4 1 0 Figure 4. On Voltage 10 20 VCB (V) 30 40 Figure 5. Capacitance Figure 6. Capacitance http://onsemi.com 3 2SC4617 PACKAGE DIMENSIONS SC−75 (SOT−416) CASE 463−01 ISSUE C −A− S 2 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. DIM A B C D G H J K L S MILLIMETERS MIN MAX 0.70 0.90 1.40 1.80 0.60 0.90 0.15 0.30 1.00 BSC −−− 0.10 0.10 0.25 1.45 1.75 0.10 0.20 0.50 BSC INCHES MIN MAX 0.028 0.035 0.055 0.071 0.024 0.035 0.006 0.012 0.039 BSC −−− 0.004 0.004 0.010 0.057 0.069 0.004 0.008 0.020 BSC G −B− 1 D 3 PL 0.20 (0.008) M B K 0.20 (0.008) A J C L H STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 2SC4617/D